Tender For Annual Repair And Maintenance Of Assistant Engineers Office Building At Sub Division Kandaghat, Distt. Solan (Sh:- Construction of New Toilet Block, Painting & Distempering And providing and Fixing Of Cup Boards)
Tender Value
4.53 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
4 days left
EMD
9000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Repair And Maintenance Of Assistant Engineers Office Building At Sub Division Kandaghat, Distt. Solan (Sh:- Construction of New Toilet Block, Painting & Distempering And providing and Fixing Of Cup Boards)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead and lifts as per direction of Engineer - in - charge. |
| 2 | Dismantling tile work in floor sand roofs laid in cement mortar for thickness of tiles 10 mm to 25 mm including stacking material within 50 metres lead and lifts as per direction of Engineer - in - charge. |
| 3 | Dismantling doors, windows and clerestorey windows, ventilators (steel or wood) shutters including chaukhats, architraves, hold fasts and other attachments etc. complete in all respects not exceeding 3.00 ( three) square meter in area etc. as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 4 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of un serviceable materials within 50 metres lead and lift, including all incidental charges. |
| 5 | Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level, excluding the cost of centering, shuttering, finishing as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work Suspended floors, roofs, landings,balconies and access platform as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges to the statisfaction of the Engineer-in-charge. |
| 7 | Providing mild steel and medium tensile steel bars reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 9 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Cement mortar 1:4 (1 cement :4 coarse sand in superstructure above plinth level up to floor level. superstructure above plinth level to up to all floor level,including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge. |
| 10 | Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position in Sal wood wood as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 11 | Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts, including all incidental charges. |
| 12 | Providing and fixing 1.00 mm (one point zero milimeters) thick coloured /plain lamination sheet (sunmica)on board/ply wood sheet with approved adhesive and nails etc. complete as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 13 | Providing and fixing square edged cover fillets (beading) 19 x 6 mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts, including all incidental charges. |
| 14 | Providing and fixing 125mm (One hundred twenty five) millimeters size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 15 | 100mm (One hundred ) millimeters size |
| 16 | Providing and fixing 150*10 (One hundred fifty into Ten millimeters) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 17 | Providing and fixing anodized aluminum Sliding Door Bolts 300*16 (Three hundred* Sixteen) millimeters size anodized transparent or dyed to required shade and color with screws etc. Complete as per direction of Engineer in Charge as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 18 | Providing and fixing 100 mm chromium plated brass handles with necessary screws etc. complete as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 19 | Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. |
| 20 | Providing and fixing Size 75 mm special quality chromium plated brass cup board locks with six levers of approved quality including necessary screws etc. complete. as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. |
| 21 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing In stringers, treads, landings etc. of stair cases, including use of chequered plate in position and applying a priming coat of approved steel primer using structural steel etc. wherever required, all complete as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges. |
| 22 | Providing and laying Vitrified tiles in different sizes 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete as per HP.PWD. Specification and as per direction of Engineer in Charg including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 23 | 52mm thick cement concrete flooring with concrete hardener topping, under layer 40mm thick cement concrete 1:2:4 (1cement : 2coarsesand : 4 graded stone aggregate20mm nominal size)and top layer12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener ix:2 graded stone aggregate 6mm nominal size) by volume,hardening compound mixed@ 2 litreper 50kg of cement or as permanufacturer's specifications. This includescost of cement slurry, but excluding the cost of nosing of steps etc. complete.as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 24 | 12mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior/exterior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:4 (1Cement:4 Sand)as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts. |
| 25 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior/exterior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:4 (1Cement:4 Sand)as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts. |
| 26 | Providing and fixing 35 mm thick including ISI marked marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 27 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 28 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 29 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer complete as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 30 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture etc.as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 31 | Providing and fixing W.C. pan with ISI marked white solid plastic seat and lid white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. |
| 32 | Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 32mm (thirty two milimeters) dia C.P. Brass waste for wash basin or sink as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. |
| 33 | Providing and fixing 32 mm (thirty two milimeters) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 34 | Providing and fixing 100 mm sand cast Iron grating for gully trap as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. |
| 35 | Providing and fixing G.I. Pipes 15 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 36 | Providing and fixing 15 mm (fifteen milimeters) nominal bore brass stop cock of standard design and of approved make conforming to as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 37 | Providing and fixing 15 mm (fifteen milimeters) nominal bore brass bib cock of standard design and of approved make conforming to as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 38 | Providing and fixing G.I. Union in G.I. pipe 32 mm nominal bore (New work) including cutting and threading the pipe and making long screws etc.complete as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 39 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 06 gms as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 40 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 41 | Providing and fixing 15 mm (fifteen milimeters) nominal bore uplasticised PVC connection pipe 30 cm length with brass unions as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender