Tender For Restoration Of Rain Damages Of Water Supply Scheme Dhansal Nallah To Kaligarh Bara Tehsil Chachiot Distt. Mandi Hp (Sh:- Construction of Reinforced Cement Concrete Storage Tank Of 10000 Ltr. Capacity At Malan Anah). E/Cost: Rs1,77,127/- E/
Tender Value
1.77 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
5 days left
EMD
3550
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Water Supply Scheme Dhansal Nallah To Kaligarh Bara Tehsil Chachiot Distt. Mandi Hp (Sh:- Construction of Reinforced Cement Concrete Storage Tank Of 10000 Ltr. Capacity At Malan Anah). E/Cost: Rs1,77,127/- E/Money: Rs.3550/- Cost Of Tender Form:- 350/- Time Limit: 3 Months.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sidesand bed stacking the excavatted soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded crushed stone aggregate 40mm Nos.minal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 3 | Providing and laying cement concrete 1:1.5:3 (1 Cement : 1.5 Sand : 3 graded stone aggregate 20 mm Nos.minal size) and curing complete excluding cost of form work and reinforcement and reinforced concrete work in : - |
| 4 | Foundatin and plinth |
| 5 | Walls any thickness but Not Shall less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level . |
| 6 | Providing and laying cement concrete 1:2:4 (1Cement : 2 sand : 4 graded crushed stone aggregate 40mm Nos.minal size and curing completre excluding the cost of form work and reinforcement for reinforced concrete work in all leads and lifts in :- |
| 7 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers upto floor two level. |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling Not Shall exceeding 4mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work including all leads and lifts. |
| 9 | Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like |
| 10 | Flat surfaces such as soffits of suspended floors,roofs, landings and the like in(a) floor etc. upto 200mm thickness. |
| 11 | Edge of Slab. |
| 12 | Providing & laying tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level in all leads and lifts. |
| 13 | Laying, jointing and testing of GMS tube in trenches (light grade) of following dia in walls floors etc. including tube fittings and making the wall floors etc. good in all leads and lifs. |
| 14 | 32mm dia. |
| 15 | Providing and Fixing Gun metal Wheel valve (with hand wheel) as per the direction of the Engineer-in-Charge. |
| 16 | White Washing with lime of undecorated wall surfaces two give an even shade including thoroughtly brooming the surface to remove all dirt dust and other forgin matter in walls in all leads and lifts. |
| 17 | Manufacturing, Supplying, Fabrication and fixing of MS Fabricated protection panel 750mmX750mm made with MS Angle 40x40x4mm for frame MS angle 30x30x3 mm for cover MS flat 25x5 mm for fixing of sliding door bolt and MS Sheet (12 gauge) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender