Tender For Restoration Of Rain Damages Lwss Kalahod In Gp Kalahod Tehsil Sunder Nagar Distt. Mandi (Hp)(Sh:- Construction Of Overhead Storage Tank 20,000 Litre Capacity With 8 Metre Staging Height)
Tender Value
7.14 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
6 days left
EMD
14300
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Lwss Kalahod In Gp Kalahod Tehsil Sunder Nagar Distt. Mandi (Hp)(Sh:- Construction Of Overhead Storage Tank 20,000 Litre Capacity With 8 Metre Staging Height)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sidesand bed stacking the excavatted soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Providing and laying cement concrete 1:3:6 (1cement:3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all respect in all leads and lifts. |
| 3 | Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in all leads and lifts in:- Foundation ,footings bases of columns and the like mass concrete in all leads and lifts |
| 4 | Column, pillars, posts and struts upto floor two level. |
| 5 | Walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc. from top of foundation level upto floor two level in all leads and lifts . |
| 6 | Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level . |
| 7 | Providing form work form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- Foundation, footings basis of columns etc. and mass concrete. |
| 8 | Columns, pillars, posts and struts, square, rectangular or polygonal in plan. |
| 9 | Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor. |
| 10 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200mm. in thickness. |
| 11 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. |
| 12 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level. |
| 13 | White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters. |
| 14 | Providing & Fixing 3.15mm thick MS sheet Man hole cover fixed with 50x50x6mm angle iron frame 500x500mm with welding including hold fast 25x6mm 150mm long 8mm dia bar and locking arrangement complete in all in all leads and lifts. |
| 15 | Fixing of GMS tube 65mm dia for scour pipe and outlet pipe in all leads and lifts. |
| 16 | Inlet pipe and over flow pipe 40mm dia. |
| 17 | Providing, supplying and fixing cast Iron double flanged sluice valve as per IS:14846/2000 latest with upto date ammendments of Kirloskar / Leader / KSB / Kartar / Pelican make of following diameter, PN-1 including MS Flanges Table - 17, confirming to IS: 6392-1971 or latest with upto date ammendments including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specifications as perescribed in relevant IS code i.e. IS: 816-1969 or latest as applicable with upto date ammendments with nuts, bolts, washers & specials etc. confirming to relevant IS code or latest with upto date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorrosive paints complete in all respect including all leads and lifts and as per entire satisfaction of the Engineer-in-charge. 65mm dia |
| 18 | Providing and supplyinig Gun Metal Gate Valve (Class-I) confirming to IS: 778-1984 in (reaffirmed 2007) incorporating amendment 1,2 and 3 of following dia within all leads and lifts as per the entire satisfaction of the Engineer-in-charge. 25mm dia |
| 19 | 40mm dia |
| 20 | Steel work welded in built up sections,trusses and framed work including cutting,hoisting, fixing in position and applying a priming coat of red lead paint :- in gratting, framed guard bar, ladders, railing brackets and similar works in all leads and lifts. |
| 21 | Soil investigation from NABL accredited agency i.e. accessing of soil safe bearing capacity and submission of structural design of over head tank and getting it approved from competent authority. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender