Tender For O Lis For Village Haleen And Balaindha In Gp Lambathach And Rod Tehsil Thunag Distt. Mandi Hp (Sh:- Laying, Jointing And Testing Of Hdpe Pipes In Distritution System At Various Locations And Various Dia And Construction of Hydrant Post = 6
Tender Value
68.58 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
0 days left
EMD
1.27 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for O Lis For Village Haleen And Balaindha In Gp Lambathach And Rod Tehsil Thunag Distt. Mandi Hp (Sh:- Laying, Jointing And Testing Of Hdpe Pipes In Distritution System At Various Locations And Various Dia And Construction of Hydrant Post = 68 Nos. 1St Phase 2Nd Phase) (Haleen, Balaindha & Tungadhar). E/Cost: Rs68,58,899/- E/Money: Rs.1,27,890/- Cost Of Tender Form:- 2000/- Time Limit: 3 Months.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc.in earth work in all kind of soil such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft./hard rock, chiselling soft/.hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring, strutting, timbering and dewatering where ever required as complete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. |
| 2 | Providing and laying cement concrete 1:4:8 (1cement:4 sand:8 crushed stone agg.40mm nominal size) and curing complete excluding cost of form work in foundation and plinth complete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. |
| 3 | Providing and laying cement concrete 1:1.5:3(1cement:1.5 sand:3 crushed stone agg.20mm nominal size ) & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 4 | In foundation and plinth complete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. . |
| 5 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering ,strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling in all heights and removal of the same for insitu reinforced concrete and plain concrete workin:- |
| 6 | Vertical surfaces such as walls(any thickness) partions and the like including attached pillasters,buttresses plinth and string courses and the like complete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. . |
| 7 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two levelcomplete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. . |
| 8 | Providing and Laying (to level or slope)and jointing and testing reinforced concrete pipe light duty non pressure pipes IS class of following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete in all leads and lifts. |
| 9 | RCC Pipe 900 mm dia Class NP2 complete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. . |
| 10 | RCC Pipe 350 mm dia Class NP2 complete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. . |
| 11 | Laying and Jointing of HDPE pipe 110 mm dia 4 Kg /Sqm in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. . |
| 12 | Providing and fixing sluice valve of 100 mm dia of approved ISI make with latest ammendment complete . HDPE endcap joint with coneection pipe 110mm OD as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. |
| 13 | Providing and fixing MS angle bracket to cover and safety of sluice valve in side out let chamber 25X25x4mm as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. |
| 14 | Providing and fixing of celing for locking arrangement for man hole cover as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. |
| 15 | Providing and Fixing HDPE pipe Tee 100X90X63 mm with equal end.(copper on both end of HDPE tee) over HDPE pipe 110 mm with existed pipe of outlet dia 110 mm existed pipe of outer by butt fusion welding complete complete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. . |
| 16 | Laying , jointing and testing of HDPE pipes in trenches to required grades as per IS: 4984-1995 latest with up to date amendments of following OD pipes, material grade and class of pipes. The jointing of pipes should be done by way of butt fusion welding as per relevant IS Code and specifications including all fittings and accessories e.g. coupling, TEE's, bends, reducers, screwed adopters, flanged tail pieces etc. complete in all respect and in all leads and lifts. (HDPE pipe will be measure and paid for separately)complete in all respects as per the direction and to the entire satisfection of the Engineer-in-charge in all lead and lift. . |
| 17 | HDPE pipes 75 mm dia PN6.00, PE 80. |
| 18 | HDPE pipes 75 mm dia PN 8.00, PE 80. |
| 19 | HDPE pipes 75 mm dia PN 12.50, PE 80. |
| 20 | HDPE pipes 90 mm dia PN 4.00, PE 80. |
| 21 | HDPE pipes 90 mm dia PN 8.00, PE 80. |
| 22 | HDPE pipes 90 mm dia PN 10.00, PE 80. |
| 23 | HDPE pipes 110 mm dia PN 4.00, PE 80. |
| 24 | HDPE pipes 110 mm dia PN 6.00, PE 80. |
| 25 | HDPE pipes 110 mm dia PN 8.00, PE 80. |
| 26 | HDPE pipes 110 mm dia PN10.00, PE 80. |
| 27 | HDPE pipes 160 mm dia PN 4.00, PE 80. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender