Tender For special Repair To Certain Bldgs Of Bso (West) Furniture Yard Under Ge(West), Delhi Cantt-10
Tender Value
1 Crore
Estimated cost
Bid Submission
18 Aug 2026
24 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Certain Bldgs Of Bso (West) Furniture Yard Under Ge(West), Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : HQ CWE NO 2 DELHI CANTT-10 NAME OF WORK: SPL REPAIR TO CERTAIN BLDGS OF BSO (WEST) FURNITURE YARD UNDER GE(WEST), DELHI CANTT-10 Contract No : CWE/WEST/TOKEN-22/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl aii quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 3 | M&L Brick work with burnt clay bricks(old size) in cement mortar 1:6 , with subclass 'B' bricks, straight or curved in plan exceeding 6 m mean radius. |
| 4 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each. |
| 5 | All as per item above but exc 1.50 Sqm n.exc 4 Sqm. |
| 6 | S&F Steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glasing bars, devetailed or welded. |
| 7 | S&F 4mm thick sheet glass ordinary quality and glazing complete in square nexc 0.50sqm each. |
| 8 | S&F 35mm thik plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated. |
| 9 | M&L 1.60 mm thick plain mild steel sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required as in repairs. |
| 10 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy. |
| 11 | S&F MS butt hinges100mm long medium weight, cold rolled. |
| 12 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised. |
| 13 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof covering. |
| 14 | Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings. |
| 15 | M&L Pre-painted galvalume alu zinc coating (AZ 150 GSM) GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixxed with self tapping screws as specified. |
| 16 | M&L Pre-painted galvalume alu zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixxed with self tapping screws as specified. |
| 17 | S&F 2 mm thik fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screws and washers in roofs, walls etc fixed with'L' or 'J' type hooks, class iv. |
| 18 | Dismantling structural steel work incl doors, gates etc and the like. |
| 19 | Dismantling timber scantlings framed work 40sq.cm and over in section, in any position. |
| 20 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 21 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') |
| 22 | S&F Mild steel hand rails, half round or other steel section or core for hand-rail straight portion. Drilled and countersunk for balusters, running bars, for doors, balusters nosing to steps including in concrete and screwing etc. wind ties for roof including securing bolts: posts and struts in fencing including cutting tops to shape as directed, drilling, holes notching for wire, etc: flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165. |
| 23 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 24 | M&L framed work as in doors or gates of angle or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hangidng or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-w(Gde-E-250 quality). |
| 25 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and incl a coat of red oxide primer. |
| 26 | M&L for preparation of new steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and incl a coat of primer. |
| 27 | M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. |
| 28 | Demolition of cement oncrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 29 | M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2(using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site. |
| 30 | M&L 40 mm thick, Cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in floors. |
| 31 | M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete. |
| 32 | M&LProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. |
| 33 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and incld 15mm thick cement screed base in CM 1:4 complete all as spd & directed. |
| 34 | M&L Machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado and pillar etc., laid over and incl 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab incl rubbing and polishing etc., complete all as specified and as directed. |
| 35 | Taking down cefully cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc. |
| 36 | M&L 15 mm thick cement plaster in CM 1:4 on fair faces of brick work/concrete etc finished even and smooth without using extra cement complete all as specified. |
| 37 | M&L 10 mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete etc finished even and smooth without using extra cement complete all as specified. |
| 38 | M&L Complete removal of existing treatment of walls/ceiling using wire brush/mechanical or electrical driven sanders, plastered or unplastered surfaces, washing, rubbing down and stopping of painted surfaces etc. compltete all as specified and as directed |
| 39 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. |
| 40 | M&L for applying three coats of white wash on walls. |
| 41 | Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 42 | M&L for exposed 8mm thick metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 43 | S & F for anodised aluminium snap grid frame work size of grid 605 x 605mm for false ceiling all as specified and directed. |
| 44 | S&F for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs (size of grid 605 x 605mm) by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified as per directions of the Engineer-in Charge. |
| 45 | M&L cement concrete 1:2:4 tye B1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 46 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed. |
| 47 | M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi stranded copper conductor 1.5 sqmm nominal cross sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC concealed conduit of dia not less than 20 mm and conduit accessories concealed in wall (Brick/stone masonary), ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with modular metal flush boxes of size 1.6 mm thick including cover plate with frame of white colour of suitable size as required at site, including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth duly complete including replastering and making good the surface of wall and painting with existing colour all as specified and directed at site for the following: |
| 48 | One light/fan/bell point controlled by one way switch 5 amps. |
| 49 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 50 | One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. |
| 51 | All as per item No 2 above but with single core copper conductor cable FLRSH 2.50 sqmm for one 3 pin 15 Amp socket concealed and including provision of 2.50 Sqmm PVC insulated single core copper conductor cable as earth continuity conductor on independent board. |
| 52 | S&F Modular switch 1 way 6A,1 module, 230V, 50 Hz complete all as specified and directed. |
| 53 | S&F Modular switch 1 way 16A,1 module, 230V, 50 Hz complete all as specified and directed. |
| 54 | S&F Modular socket 6A- 3 pin combined 2 module,230V, 50 Hz complete all as specified and directed. |
| 55 | S&F Modular socket 6A/16A - 2/3 pin combined 2 module, 230V, 50 Hz complete all as specified and directed. |
| 56 | S&F Modular ceiling fan regulator, step type for BLDC ceiling fan 1 or 2 module . |
| 57 | Taking down of Ceiling fan, Ceiling cable end, dismantling blades and removing fan and blades and deposit to the MES store yard complete all as specified and directed. |
| 58 | S & F 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current motor (BLDC) Motor copper wound, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.50, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete. |
| 59 | S&F of factory made epoxy polyester powder coated distribution board SP & N 4 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door ((IP-43, IK 9 protection) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 06 SP MCBs as outgoings complete all as specified and conforming to IEC-61439-3 including taking down old DBs all as specified and directed.NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 60 | S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43, IK 09 protection ) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 06 SP MCBs as outgoings complete all as specified and conforming to IEC-61439-3 including taking down old DBs all as specified and directed.NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 61 | S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IEC-60898-1:2002 complete all as specified and directed. |
| 62 | S&F of MCB SPN 32 Amps rating 240V, 10KA breaking capacity, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve complete conforming to IEC-60898-1:2002 complete all as specified and directed. |
| 63 | S&F of 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC armoured, PVC sheathed 6 sq. mm nominal cross section, 2 core. |
| 64 | S&F surface/wall mounting LED batten luminaire with following specifications :-(a) System Power : 20 W(b) Length : 4ft(c) Housing : Epoxy powder coated white extruded aluminium channel(d) Diffuser : Milky White Polycarbonate(e) Rated Voltage : 240V(f) Safe Operating Voltage : 140V to 270V(g) Rated Frequency : 50Hz(h) Power Factor : ≥ 0.95(j) THD : ≤ 10(k) Operating Temp : - 10 deg C to + 45 deg C(l) Lumen Efficacy of LED : ≥ 120 Lm/W(m) System Luminous Efficacy : ≥ 100 Lm/W(n) CRI : ≥ 80(o) CCT : 5700K(p) Driver : Integral SMPS based constant current type with short circuit, surge voltage protection upto 2.5 KV.(q) IP rating : 20(r) IK rating : 03(s) Average LED life : 50000 Hrs |
| 65 | S&F in replacement LED Building security light fitting complete with mounting bracket made out of light grade GI pipe 40mm bore 1.20 mtr long bend to shape including 02 Nos of 40x5mm FI clamps with GI bolt, nut, washer and 3-core copper cable connection from ceiling rose to light fitting. Specification of light fitting are as under :-(a) System Power : 35 W(b) Housing : Pressure die cast aluminium alloy having separate optical & control gear compartment, top opening, polyster powder coated after phosphochromate treatment(c) Optics : Polycarbonate UV stabilised with integrated lens(d) Light source : SMD LED Module mounted on MCPCB(e) Rated Voltage : 240V(f) Safe Operating Voltage : 140V to 270V(g) Rated Frequency : 50Hz(h) Power Factor : ≥ 0.95(j) THD : ≤ 10(k) Operating Temp : - 10 deg C to + 45 deg C(l) Lumen Efficacy of LED : ≥ 140 Lm/W(m) System Luminous Efficacy : ≥ 100 Lm/W(n) CCT : 5700K(o) Driver : In built SMPS based constant current type with protection for output open /short circuit, phase to phase, over voltage & surge voltage upto 10 KV.(p) IP rating : 66(q) IK rating : 07 |
| 66 | Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 67 | S&F of LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with dricer and lamp complete all as specified and directed. |
| 68 | S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender