Tender For special Repair To Bldg No. P-49 And P-60 At New Chitral Line Under Ge(West) Delhi Cantt-10
Tender Value
1.37 Crore
Estimated cost
Bid Submission
18 Aug 2026
3 days left
EMD
2.12 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No. P-49 And P-60 At New Chitral Line Under Ge(West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : HQ CWE NO 2 DELHI CANTT-10 Name of Work: SPL REPAIR TO BLDG NO. P-49 AND P-60 AT NEW CHITRAL LINE UNDER GE(WEST) DELHI CANTT-10 Contract No : CWE/WEST-37/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified |
| 3 | Demolition of cement (Un-reinforced) in above Ground floors and paving exc 15cm thickness above ground level) complete all as specified. |
| 4 | Dismantling of brick tiles or terracing tiles single layer on roof complete all as specified and directed. |
| 5 | Demolition of mud phuska on roof slabs, any thickness including cleaning of roof surfaces and removing the debris upto the distance exc 1.00 Km but not n.exc 1. 5 Km complete all as specified and directed. |
| 6 | Scraping old tar from roof treatment over concrete padding of any thickness etc from roof including finishes or junction or parapet and cleaning the surface complete all as specified and directed. |
| 7 | M&L for providing cement concrete 1:2:4 type B-I 20mm graded in roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work complete all as specified and directed. |
| 8 | S & F for Heat Resistant Terrace ceramic Tiles (300 mm x 300 mm x 9-10 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner incl 15mm thick screed bed in CM1:4, complete all as specified and directed. |
| 9 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) on roof padding with water proofing compound surface finished even and smooth without using extra cement complete all as specified and directed. Note: (Rate of WPC shall be included in unit rate) |
| 10 | Demolition of brick work built in cement /lime mortor in any position / situation in walls/parapets complete all as specified and directed. |
| 11 | M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 mtr mean radius built in cement mortor 1:6, complete all as specified and directed. |
| 12 | All as per item No.10.00 above, but half brick thick in CM 1:4, complete all as specified and directed. |
| 13 | M&L for water proofing treatment to roof surface, with APP polymeric based water proofing membrane 3mm thick & weighing not less than 3.0 Kg / Sqm of approved make black finish consisting of a central core of high molecular high density polyethylene film (HMHDPF) & reinforced with non woven polyester matt of min 150 gm/sqm with a thermo fusible finish laid over a coat of hot blown bitumen of 85/25 grade conforming to IS 702 @ 1.2 kg/sqm over a coat of an bitumen primer conforming to IS-3384 @0.4 Ltr/Sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing including applying a coat of cold emulsion bituminous primer complete as per manufacturer's instructions complete all as specified and directed.Note :- (a) Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only.(b) Bitumen primer, bitumen and membrane shall be of same make / manufacturer. (c) The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65mm X 50mm size& making good in CM 1:3. |
| 14 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 15 | All as per item No 13.00 above, but 20mm bore, complete all as specified and directed. |
| 16 | M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed. |
| 17 | All as per item No 15.00 above but 25mm dia, complete all as specified and directed. |
| 18 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10 cm girth for inserting GI tubing / CPVC pipes in walls, floor etc and making good complete all as specified and directed. |
| 19 | Dismantling of PVC water storage tanks exc 250 & n.exc 500 ltrs capacity and removing from site complete all as specified and directed. |
| 20 | S&F rotational moulded polythylene water storage tanks 500 Ltrs capacity, triple layered (cylindrical vertical with closed up) hoisted and fixed in position incl tank cover complete all as specified and directed. |
| 21 | Demolition and breaking up of 75mm dia drain pipes (CI,AC etc) set in any cement mortor of any diameter including bends, complete all as specified and directed. |
| 22 | Demolition and breaking up of 100mm dia drain pipes (CI,AC etc) set in any cement mortor of any diameter incl bends, complete all as specified and directed. |
| 23 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 24 | S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and trenches complete all as specified and directed. |
| 25 | All as of above item no 23 but of 75mm dia, complete all as specified and directed. |
| 26 | S & F bends 110mm dia PVC (SWR) bends, complete all as specified and directed. |
| 27 | S & F bends 75mm dia PVC (SWR) bends, complete all as specified and directed. |
| 28 | S & F 110mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval acces door, complete all as specified and directed. |
| 29 | S & F 75mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval access door, complete all as specified and directed. |
| 30 | S & F 75mm dia PVC (SWR) floor trap, plain with 100mm stainless steel grating including jointing with solvent cement, complete all as specified and directed. |
| 31 | S&F 100mm dia stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay including boltstand nuts seuring ends of stays to wall complete all as specified and directed. |
| 32 | S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. |
| 33 | S&F in repair European vitreous china wash down water closet pan S / P Trap (excluding flushing cistern but including flush pipe and pvc seat cover white). complete all as specified and directed. |
| 34 | S&F in repairs vitreous china wash hand basin (flat back or angle back type) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size. complete all as specified and directed. |
| 35 | S&F in repairs sink made of stainless steel 1mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 495 x 420 mm, bowl size 410 mm x 330 mm x 160mm complete all as specified and directed. |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 37 | S&F mild steel framed work as in door or gates of angle or other sections, cooler stands, with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165, complete all as specified and directed.Note : Provision of openable arrangement for placing cooler on stand shall be made in window grill wherever required. |
| 38 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 39 | Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter from frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing to or from store complete all as specified and directed. |
| 40 | Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) not exc.1.5 Sqm each and removing to or from store complete all as specified and directed. |
| 41 | S & F powder coated anodised aluminum ventilator/ window outer frame weighing minimum 0.55 Kg/m, incl fixed with 5mm frosted glass (using aluminum snap beading), EPDM rubber gasket along with provision for fresh air fan, full system powder coating with pure polister coat (thickness of powder coating not less than 50 micron of any shade install with SS screw raul plug pvc & silicone filling all around complete all as specified and directed. |
| 42 | Supply and fixing for aluminium powder coated three track sliding window made of the following specifications :- (Note : external size of window shall be measured. Following items are included in this unit rate.)(a) Aluminium frame powder coated all around of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Provn of 03 trade runners of size 92 x 31.75 x 1.10 mm. (c) Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 4 mm thick heat observing glass with suitable EPDM beading and locking clips arrangement. (d) Provn of 01 No gauzed shutter of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading arrangement of Section 44 mm x 18 mm x 1.25 mm. (e) Aluminium powder coated grill of weight not less than 1.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame.Note :- Opening for window type AC shall be made in aluminium window in each quarter and rates shall deemed to be included in this item. |
| 43 | S&F brass chromium plated magic eye ,complete all as specified and directed. |
| 44 | M&L for 600x450mm beveled edge mirror of selected quality glass 5.5 mm thick mounted on and including 6mm thick AC building board or commercial plywood and fixed 1st class Hard wood moulding frame and two Nos. hanging clips including taking down old unserviceable looking mirrorcomplete all as specified and directed. |
| 45 | M&L for Preparation of new or previously untreated surfaces of steel surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 46 | M&L for Preparation of old or treated surfaces of steel surface of any description not otherwise described over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 47 | Complelte removal of existing old treatment on surface of walls with machenical grinder (machine) as per specification of manufacturer paints/OBDs complete all as specified and directed. |
| 48 | M& L a coat of alkali resistant primer over alread prepred surface of walls complete all as specified and directed. |
| 49 | M& L for applying two coats of oil bound distemper on old wall surface with roller brush complete all as specified and directed. |
| 50 | M&L for preparation of old treated brick surfaces of walls upto 4 story height by scrubbing with wire brush, hard brush, washing down with water and applying two coat of cement based paint, white or tinted over one coat of alkali resistant primer, complete all as specified and directed. |
| 51 | M&L for prepared surface of old ceiling and apply three coat of white wash on ceiling, complete all as specified and directed. |
| 52 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished fair and smooth without using extra cement even hieght in multistorey building ,complete all as specified and directed. |
| 53 | M&L for rendering 10mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of walls finished fair and even without using extra cemet and in multistorey building ,complete all as directed |
| 54 | M&L for 5mm thick rendering in cement mortar 1:3 finished fair and even surface without using extra cement on ceiling, chajja in multy storey building etc, complete all as specified and directed. |
| 55 | M&L for preparation of newly plastered surfaces of wall and apply two coat oil bond distemper over one coat of primer from the same manufacture complete all as specified and directed. |
| 56 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 57 | M&L for preparation of newly plastered surfaces of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 58 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified and directed. |
| 59 | Supply only Integral waterproofing compound (ISI marked), complete all as specified and directed. |
| 60 | M&L for non skid colour ceramic rectified tiles 300×300×7 to 8 mm thick thick (square/rectangular) area of each tiles exceeding 0.06Sqm but not exceeding 0.11Sqm in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 61 | M&L for coloured glazed ceramic tiles of size 600X300X 7 to 8 mm on vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 10mm thick in cement mortar 1:4, complete all as specified and directed. |
| 62 | M&L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 63 | M&L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match the existing ground conditions, complete all as specified and directed. |
| 64 | Dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 65 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including Brushing neat cement slurry with 3.0kg of cement per sq. metre, complete all as specified & directed. |
| 66 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, making of bull nose laid over and including cement screed bed 20 mm thick in cement mortar 1:4, complete all as specified and directed. |
| 67 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, making of bull nose laid over and including cement rendering 10 mm thick rough finished as a backing coat in cement mortar 1:3, complete all as specified and directed. |
| 68 | S&F in repair aluminium anodised tubular towel rail 20mm dia, D type 60 cm long between flanges, complete all as specified and directed. |
| 69 | S&F in repair Glass Shelf of 8mm minimum thickness including CP railing with minimum 400mm length complete all as specified and directed. |
| 70 | S&F in repair stainless steel peg set of 6 peg complete all as specified and directed. |
| 71 | S&F in repairs Stainless Steel curtain rails with fixing brackets stops and rollers, inc Knobs etc, complete all as specified and directed. |
| 72 | S&F in repairs 15mm dia chromium plated bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 73 | S&F in repairs brass CP vertical mixer for mixing hot & cold water for wash hand basin screwed down for 15 mm bore iron pipe of ferrule complete all as specified and directed. |
| 74 | S&F in repairs CP wall mixer non telephonic type 3-in-1 mixing hot and cold water for shower screwed down for 15 mm brass iron pipe of ferrule of complete all as specified and directed. |
| 75 | Supply and fix Brass CP mixer swivel spout for mixing hot & cold water for Sink screwed down for 15mm bore iron pipe or ferrul, complete all as specified and directed. |
| 76 | S&F in repairs stop valve / Angle valve 15mm bore fancy type chromium plated, with long shank and cup (concealed type) complete all as specified and directed. |
| 77 | S&F in repairs 20mm bore of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 78 | S&F in repairs 25mm bore of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 79 | S&F PVC connection 450mm long with 2 Nos brass check nuts, suitable for 15mm bore, complete all as specified and directed. |
| 80 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminum rod and high density polythene float and flynut complete, screwed for iron pipe or brass furrule size 25mm bore, complete all as specified and directed. (Min weight 210gms) |
| 81 | S&F in repairs shower rose, chromium plated brass, fancy type, 125 mm with or without swivel joint, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 82 | Supply in repairs only CP waste coupling 32mm size with PVC waste pipe, plugs and washers for kitchen sink, complete all as specified and directed. |
| 83 | S&F in repairs stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 600mmx750mmx250mm including complete all as specified and directed. |
| 84 | M&L for providing 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate admixed with integral WPC complete all as specified. (Note: Supply only WPC shall be measured and paid saparately.) without using extra cement, complete all as specified and directed. |
| 85 | M&L for providing Cement concrete 1:5:10 in filling of sunken portion and sub base type E2 using 40mm graded aggregate, complete all as specified and directed. |
| 86 | M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound, complete all as specified and directed.(Note : Supply only WPC shall be measured and paid separately) |
| 87 | M&L for 18 to 20mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in 15mm tihck cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including made of half round Granite Corner,complete all as specified and directed. |
| 88 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.Note :- steel sheet , provide over chhajja upto G+8 storey building using scaffolding . |
| 89 | M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick laid in bays and surfaces finished even and fair, complete all as specified and directed. |
| 90 | Demolition of RCC jalli any size and any position and providing and fixing glass reinforced concrete (G.R.C) jalli/panels in approved size pattern,design,thickness and colour of GRC Terra firma make or equivalent.Quart,fine silica sand, Alkali resistant glass fibre manufacture by NEG or equivalent, polymer manufactured by BASF or equivalent and UV resistant synthetic norganic pigment should be usedfor pigmentationmanufactured by Bayferrox(Germony) or equivalent. The material casting should be used for pigmentation manufactured by reckli or equivalent. The fixing of screen should be Dryfixing ie to be done with MS frame work with and including fixing arrangement in required shape including brackets, fasteners and pins etc complete all as specified and directed. |
| 91 | M&L Cement Concrete 1:2:4 type B-2 (40mm graded aggreate) 125mm thick as in tank staging , platforms etc finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed. |
| 92 | S&F Grating doom 100mm dia of SS, complete all as specified and directed. (Minimum weight 35gms) |
| 93 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 94 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately), complete all as specified and directed. |
| 95 | M&L for solid WPC (Wood Polimer Composite) sheet 18mm thick (water proof and termite proof) prelaminated one side with decorative choice colour and other side balancing white as in cup board and all simillar kind of works . The sheet shall be finished all edges with 0.5mm beading/ lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacture's instruction, complete all as specified and directed. |
| 96 | S&F continuous (Piano) hinges, stainless steel bright finish (width of flap when open 30mm), complete all as specified and directed. |
| 97 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of of brass polished bright finished complete all as specified and directed. |
| 98 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 99 | Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified and directed.Note: MTC and Screw Out Test will be provided by Contractor |
| 100 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (Note: M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)., omplete all as specified and directed. For WPC solid door/window frames,minus 5mm tolerance indimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 101 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 102 | S&F stainless steel AISI 304 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed. |
| 103 | S&F SS barrel tower bolt extruded section 200mm long and fixed with SS Screws (ISI Marked), complete all as specified and directed. |
| 104 | S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked), complete all as specified and directed. |
| 105 | S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked), complete all as specified and directed. |
| 106 | S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked), complete all as specified and directed. |
| 107 | S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked), complete all as specified and directed. |
| 108 | M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron , complete all as specified and directed. |
| 109 | M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as specified and directed. |
| 110 | Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed. |
| 111 | Returning, Earth filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil, complete all as specified and directed. |
| 112 | Providing and laying in slabs, beams, parapet wall, RCC wall,RCC column, Kitchen platform etc position of RCC M-30 design mix grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix through RMC( ready mix concrete) including pumping of concrete to site of laying and the cost of centering, shuttering, form work, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and form work excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete) including Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, column, staircases, landing, chajjas, Parapet wall and similar suspended work etc including hieght upto four storey building , in any position, complete all as specified and directed. |
| 113 | Item no. 112.01 to 112.03 mentioned below are the parts of item no. 112, and will be considered as a single item and payment for this will be done under item No. 112. |
| 114 | M&L for followings :-i) Removing plaster & finishes from all exposed / damaged portion of coloumns, slabs & beams(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)(i) Removal of cover concrete with exposing reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed)(iv) Cleaning exposed concrete substrate by using water jet. (v) Removing visible rust along the length of reinforcement using hand tools as approved. (The Engr-in-charge may order sand blasting if rust is approved)(vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed |
| 115 | M&L for providing rust proof /anti corrosive treatment to bars -(i) Apply a single coat of Alkaline rust converting primer on alround bars old as recommended by the manufactuer (ii) Apply two coats of Epoxy phenolic anti corrosive protective coat on bars alround new & old as recommended by the manufactuer. Note: Anti corrosive treatment shall be continuous espcially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating complete all as specified and directed |
| 116 | M&L for providing PMM (Polymer modified cementitious mortar ) :-(i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes) (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note: Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed |
| 117 | Item no. 113.01 to 113.04 mentioned below are the parts of item no. 113, and will be considered as a single item and payment for this will be done under item No. 113. |
| 118 | M&L for followings :-i) Removing plaster & finishes from all exposed / damaged portion of coloumns, slabs & beams(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)(i) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed)(iv) Cleaning exposed concrete substrate by using water jet. (v) Removing visible rust along the length of reinforcement using hand tools as approved. (The Engr-in-charge may order sand blasting if rust is approved)(vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed |
| 119 | M&L for providing rust proof /anti corrosive treatment to bars -i) cleaning of all exposed bars (new & old) alround(ii) Apply a single coat of Alkaline rust converting primer on alround bars new & old as recommended by the manufactuer(ili) Apply two coats of Epoxy phenolic anti corrosive protective coat on bars alround new & old as recommended by the manufactuer. Note: Anti corrosive treatment shall be continuous espcially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating |
| 120 | M&L for Providing & Pouring Micro concreting M-40 grade -(i) Dry concrete substrate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes) (iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc, Adding of aggregates will be permitted only as per manufacturer's recommendation without compromising the strength.The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed. Note: The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item. |
| 121 | M&L for use & waste of form work using steel sheets, steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed.Note : Form work shall be 100% leak proof. For purpose of payment area in touch with concrete shall be measured. |
| 122 | M&L for Drilling & chemical anchoring of new rebars/stirrups -i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under -8 to 10 mm dia bar - drilling length 80 to 100 mm Note: Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete all as specified and directed.(The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item. |
| 123 | M&L for Drilling & chemical anchoring of new rebars/stirrups :-(i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under -16 & 20 mm dia bar - drilling length 160 to 180 mm Note : Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar (Master flow 935 of BASE or equivalent FOSROC/SIKÀ) with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete all as specified and directed.(The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item) |
| 124 | M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 125 | All as per item no 116.00 above, but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders all as specified and directed. |
| 126 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and removal from site and making good the disturbed surfaces of (wall/floors/ceiling etc) complete all as specified and directed. |
| 127 | M&L for concealed point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated single core copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing modular switches, socket outlet and fan regulators etc. complete all as specified and directed. |
| 128 | One light/fan/bell/Exhaust fan/Fresh Air Fan point controlled by one way switch 5 amps. |
| 129 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 130 | One 3 pin 5 Amps socket outlet point controlled by one way switch on same board along with other switches. |
| 131 | One light point controlled by two, two way switch with cable 1.5 Sqmm size. |
| 132 | All as per item No 119.00 above, but with single core copper conductor cable FLRS 2.50 sqmm for one 3 pin AC Box outlet,20 Amps concealed and including provision of 2.50 Sqmm PVC insulated single core copper conductor cable as earth continuity conductor on independent board, complete all as specified and directed. |
| 133 | M&L for concealed point wiring with insulated unsheathed multistranded FRLS copper conductor in non-metalic rigid PVC conduit but with single core copper conductor cable FLRS 4.0 sqmm for one 3 pin AC Box outlet 20 Amps concealed and including provision of 4.0 Sqmm single core PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and directed.(For AC point) |
| 134 | S&F Modular switch 1 way 6A,1 module, 230V, 50 Hz, complete all as specified and directed. |
| 135 | S&F Modular switch 1 way 16A,1 module, 230V, 50 Hz, complete all as specified and directed. |
| 136 | S&F Modular socket 6A- 3 pin combined 2 module,230V, 50 Hz, complete all as specified and directed. |
| 137 | S&F Modular socket 6A/16A - 2/3 pin combined 2 module, 230V, 50 Hz, complete all as specified and directed. |
| 138 | S&F Modular switch single pole two way 6 Amp 1 module, complete all as specified and directed. |
| 139 | S&F Modular ceiling fan regulator, step type for BLDC ceiling fan 1 or 2 module, complete all as specified and directed. |
| 140 | S&F of switch modular type single pole Bell push 6 Amp 1 module, complete all as specified and directed. |
| 141 | S&F of electric Bell ding dong AC 230 volts single pole, complete all as specified and directed. |
| 142 | M&L for Decorative wall light fitting made up of Polycarbonate,B-22, complete all as specified and directed. |
| 143 | S&F of Lamp holder,PVC/Polycarbonte type with back plate suitable for batten fitting with connections, complete all as specified and directed. |
| 144 | S&F of ceiling rose 3 phase/PVC/polycarbonate isolated body, complete all as specified and directed. |
| 145 | S&F LED Lamp of wattage 10 Watt, 95 lm/W, with PF >0.9 & CRI:80,protection againt high voltage upto 360V, B22 ,230 Volts,50 Hz,6500K, complete all as specified and directed. |
| 146 | Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the disturbed surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including taking down existing old wire, complete all as specified and directed.Note :- Two runs of IC x 6.00 sqmm (Phase wire and neutral ) and one run of IC x 6.00 sqmm (as earth wire) will be measured as one unit length. |
| 147 | Taking down of Ceiling fan, Ceiling cable end, dismantling blades and removing fan and blades and deposit to the MES store yard complete all as specified and directed. |
| 148 | Fixing of the old BLDC ceiling fan and regulator on site carefully with fixing assessories (nut & bolts) etc after repair of building, complete all as specified and directed. |
| 149 | S&F ceiling fans complete with blades, down rods, remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed. |
| 150 | S&F of 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP 65 Protection, System level efficacy of the Luminary is =>100 lm/W, Power Factor =>0.90, Colour Temperature 3000K-6500K, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed, complete all as specified and directed. |
| 151 | S&F of surface mounting LED aluminium Batten 20W LED light. Fixture should have minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,CCT 4000-6500K & CRI>80, PF≥0.90. An operating voltage Range of 140-270V including all connection upto ceiling rose, complete all as specified and directed. |
| 152 | S&F of LED light fitting 1x 10W, 220V, AC decorative box type with driver, holder, fixture should have minimum efficacy at system level >=120 lumens/Watt, CCT 4000-6500K ,PF>0.90 including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 153 | Taking down old DBs, VTPN DBs complete with MCBs, MCCBs of any make and type from the site, complete all as specified and directed. |
| 154 | S&F of factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 10 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 complete all as specified and directed.NOTE :-(i) MCBs shall be measured and paid separately.(ii) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 155 | S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for 100 Amps, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 including taking down old DBs all as specified.NOTE :-(i) MCBs/MCCBs shall be measured and paid separately.(ii) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 156 | S&F of MCCB 100 Amp 4 pole 16 KA at 415 V, complete all as specified and directed. |
| 157 | S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC, Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity, complete conforming to IS 8828 of 1996 complete all as specified and directed. |
| 158 | S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 complete all as specified and directed. |
| 159 | S&F in replacement MCB SPN 40 Amps rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 160 | Taking down carefully exhaust fan any type and deposit to MES store yard with all connected accessories after disconnecting all connections including cutting and making proper smooth round hole suitable for fixing exhaust fan 300 mm sweep dia and refixing the same on site carefully, complete all as specified and directed. |
| 161 | S&F of stainless steel louver shutter of exhaust fans suitable for 300 mm size at the height from 3 mtr to 14 mtr making good surface of disturbed area including taking down old louver shutters complete all as specified & directed. |
| 162 | S&F of Fresh Air Fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep, single phase,including cutting of holes in wall/windows for fixing the fresh air fan complete all as specified and directed. |
| 163 | S&F of 35 watts 230 V AC outdoor type with High efficient LED Building security light fitting with high pressure die cast Aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP: 65/66 protected complete with bracket made out of 32 mm GI pipe light grade 1.2 mtr long bend to shape with clamps and fixing bolts all as specified and directed. |
| 164 | Taking down carefully Geyser 25 ltrs capacity after disconnecting all electrical connections and deposit to the MES store yard and refixing the same on site carefully with fitting accessories (Nut and bolts etc) after repair of building complete all as specified and directed. |
| 165 | M&L in replacement of earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI earth lead wire 4.0 mm as earthing leads by means of bolts, nuts, check nuts and washers all joints as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1 chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as specified and directed. |
| 166 | M&L for modular AC Box with 20A SP mini MCB,Plastic enclosure & unbreakable Heavy Duty ISI mark Plug Top complete set dully concealed in wall complete all as specified and directed.(For AC & Geyser point) |
| 167 | Taking down carefully electric meter and deposit to MES store yard with all connected accessories after disconnecting all connections and refixing the same on site with fitting accessories, complete all as specified and directed. |
| 168 | S&F of MCCB 40-63 Amp 4 pole 16 KA at 415 V, complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender