Tender For Repairs To Wooden And Aluminium Joinery, Repair To Cupboards And Allied Works In Otm And Sailors Md Accn At Sma Rameswaram Under Ge Fort Kochi
Tender Value
14.75 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
14 days left
EMD
29500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Wooden And Aluminium Joinery, Repair To Cupboards And Allied Works In Otm And Sailors Md Accn At Sma Rameswaram Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat with shutter (without taking off shutters from the frames) not exc 1.5 sqm each, complete all as specified and as directed. |
| 2 | Taking down chowkhat with shutter (without taking off shutters from the frames) exc 1.5 sqm each, complete all as specified and as directed. |
| 3 | Taking down door shutters of any description exc 1 sq. m and not exc 2 sqm each, complete all as specified and as directed. |
| 4 | Taking down window/ shutters of any description not exc 1 sqm each, complete all as specified and as directed. |
| 5 | Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. (Size of the frame is 105x60mm) |
| 6 | Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. (Size of the frame is 125x60mm) |
| 7 | Supply and fix Flush door shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. Note: Necessary preservation to timber shall be carried out all as specified and the rate quoted is inclusive of this preservation |
| 8 | Supply and fix 2nd class hard wood, 35mm thick glazed and skeleton shutters with 8 panels, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and as directed. Note: Necessary preservation to timber shall be carried out all as specified and the rate quoted is inclusive of this preservation |
| 9 | Supply and fix second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers , complete all as specified and as directed. Note : Necessary preservation to timber shall be carried out all as specified and the rate quoted is inclusive of this preservation |
| 10 | Supply and fix Solid prelaminated PVC Door Frame of size 50mm x 47mm made out of 5mm made out of single side pre-laminated PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, edges will be painted to match with prelam sheet. |
| 11 | Supply and fix Factory made solid, both side decorative laminated PVC panelled door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelaminated PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails feathered at edges, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 12 | Supply and fix powder coated aluminium frame (minimum thickness of powder coating 50 micron) for windows, cupboards including joining cleat for fixing & hand press locking arrangement with keys for cupboard shutter etc. complete all as specified and as directed. |
| 13 | Supply and fix standard aluminium deco grills including making arrangement for opening window (wt. not less than 3 kg per Sqm) grill shall be fixed with suitable clip beading /clamps, complete all as specified and as directed. |
| 14 | Supply and fix powder coated aluminium sliding window shutters/ ventilators (minimum thickness of powder coating 50 micron), aluminium sections weighing 0.55 kg/m including provision of airtight beading and locking arrangement, filling the gap with sealant, sliding wheel, top bush etc complete all as specified and as directed. |
| 15 | Supply and fix powder coated aluminium cupboard shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, locking arrangement, hinges/ rollers, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 16 | Supply and fix 5.5mm thick PVC solid sheet exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with necessary fittings at site as per specification, complete all as specified and as directed. |
| 17 | Supply and fix 18mm thick Solid plain PVC Sheet suitably fixed as in shelves, partitions, doors in cupboards with all round bearers, stainless steel screws & glue complete all as specified and as directed. |
| 18 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 19 | Supply and fixing in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and as directed. |
| 20 | Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and as directed. |
| 21 | Supply and fix 4mm thick sheet glass (float glass) ordinary quality and glazing fixed in aluminium/ wooden window shutters area of each pane not exc 5 sqm in each pane complete all as specified and as directed. |
| 22 | Supply and fix 4mm thick figured sheet glass (float glass) ordinary quality and glazing fixed in aluminium/ wooden window shutters area of each pane not exc 5 sqm in each pane complete all as specified and as directed. |
| 23 | Preparing surfaces of wood and wood-based materials, steel and iron work, new or old, of any description and girth, not otherwise described for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc. area not exc 0.1 sq. m each with tar or coal tar black paint, complete all as specified and as directed. |
| 24 | Material and labour for providing cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in hold fast bed block, filling in pressed steel frame, window cills, complete all as specified and as directed. |
| 25 | Supply and fixing in repairs 100mm aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 26 | Supply and fix 100mm aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 27 | Supply and fixing in repairs 150mm aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 28 | Supply and fix 150mm aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 29 | Supply and fixing in repairs 200mm aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 30 | Supply and fix 200mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 31 | Supply and fix 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 32 | Supply and fix 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair, complete all as specified and as directed. |
| 33 | Supply and fix 200mm size PVC sliding door bolt with hasp, staple (bolt type) and fixing clips of PVC and fixing bolts suitable for PVC door shutters complete all as specified and as directed. |
| 34 | Supply and fix 125mm size PVC door handle suitable for PVC door shutters complete all as specified and as directed. |
| 35 | Supply and fixing in repairs butt hinges 75mm, medium weight, cold rolled and mild steel, complete all as specified and as directed. |
| 36 | Supply and fix butt hinges 75mm, medium weight, cold rolled and mild steel and fixed, complete all as specified and as directed. |
| 37 | Supply and fix butt hinges 125mm, medium weight, cold rolled and mild steel and fixed, complete all as specified and as directed. |
| 38 | Supply and fixing in repairs butt hinges 125mm, medium weight, cold rolled and mild steel, complete all as specified and as directed. |
| 39 | Supply and fix 200mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 40 | Supply and fix 100mm aluminium handles, cast type, anodised, complete all as specified and as directed. |
| 41 | Supply and fixing in repairs 100mm aluminium handles, cast type, anodised, complete all as specified and as directed. |
| 42 | Supply and fixing in repairs 150mm aluminium handles, cast type, anodised, complete all as specified and as directed. |
| 43 | Supply and fix 150mm aluminium handles, cast type, anodised, complete all as specified and as directed. |
| 44 | Material and labour for preparation of new or previously untreated wood or wood-based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 45 | Material and labour for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of PU paint over a coat of PU primer complete all as specified and as directed. |
| 46 | Msupply and fix in repairs for 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed , complete all as specified and as directed. |
| 47 | Supply and fix in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and as directed. |
| 48 | Supply and fix Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender