Tender For special Repair For Approx 7890 Sqm Of Courtyard Floor With Kota Stone Of Jcos And Or Govt Md Accn Bldg No P-3, P-4M, P-6, P-8, P-9, P-10, P-95, P-136, P-137, P-138, P-139, P-140, P-141, P-142, P-143, P-144, P-146, P-147, P-148, P-149, P-15
Tender Value
1.34 Crore
Estimated cost
Bid Submission
15 Aug 2026
23 days left
EMD
2.09 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair For Approx 7890 Sqm Of Courtyard Floor With Kota Stone Of Jcos And Or Govt Md Accn Bldg No P-3, P-4M, P-6, P-8, P-9, P-10, P-95, P-136, P-137, P-138, P-139, P-140, P-141, P-142, P-143, P-144, P-146, P-147, P-148, P-149, P-150, P-151, P-152, P-154, P-155, P-156, P-157, P-158, P-159, P-160, P-161, P-162, P-163, P-168, P-169, P-170, P-171, P-172, P-173, P-174, P-175, P-176, P-178, P-181, P-182 Of 505 Abw Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed. |
| 3 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed |
| 4 | Ditto- item No 3 but in vertical surface as skirting, dado and risers to steps over and including10 mm thick rendering/backing coat in cement mortar 1:4 etc. |
| 5 | M&L for 75mm thick type-C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base to receive stone slab and pavement all as specified and directed. |
| 6 | M&L 20 to 25 mm thick prepolished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 7 | M&L 20 to 25 mm thick prepolished machine cut Kota stone slab as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 8 | Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), eas, stair cases, landing, Chajjas and similar suspended work (Reinforcement cut as required to facilatate demolition) all as specified and directed. |
| 9 | M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in chajjas complete (reinforcement to be measured separately). |
| 10 | Mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete. |
| 11 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and siilar work exc 5cm but not exc 10cm wide |
| 12 | Formwork for rough finished surfaces of concrete to chullah hoods, chajjas, throughs and similar items including edges. |
| 13 | Demolitin of brickwork built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles |
| 14 | M & L Brickwork with subclass 'B' Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6 complete all as specified. |
| 15 | Ditto- item No. 14 above but except brick complete. |
| 16 | M&L for PCC 1:2:4 type B-0, using 12.5mm graded agg as in coping, kerbs or mud stops, rounded or chamfered on edges completed as specified. |
| 17 | Taking down existing cement plaster any thickness keyed pointing or taking dow including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 18 | M&L 12 mm thick Rendering in cement mortar 1:4 on faces of brick work or concrete external surfaces of wall finished even and smooth without using extra cement all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for providing PMM (Polymer modified cementitious mortar) :-(i) Dry sub strate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM of 30 thickNote:- Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed. |
| 20 | M&L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth complete. |
| 21 | M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete. |
| 22 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing in Fe 410-W (Gde-E-250) quality A complete |
| 23 | S&F Mild steel, plain, black sheet of 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required |
| 24 | S&F 300 mm long Mild steel sliding door bolts, plate type stove enamelled black with right bolt not less than 16mm to steel shutter with olt plate hasp and staple with welding all as specified and directed. |
| 25 | S&F to steel door shutter with welding of butt hinges, 100 mm size heavy weight, cold rolled mild steel complete |
| 26 | M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete. |
| 27 | Cleaning of Mud/Silt/RCC debris/Cment concrete debris and Old Brick/sotne bats etc. from Open/Coverd drain, RCC/Brick/Hume pipe Culvert etc of any capacity and depth/width by dewatering, taking out mud/ sludge/quid, getting out and removing & depositing the sludge , complete all as specified and directed to be thrown away outside of defence area. |
| 28 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete. |
| 29 | S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete.. |
| 30 | S&F PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, complete. |
| 31 | S&F PVC (SWR) bends any radius, 110 mm bore, complete. |
| 32 | Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete. |
| 33 | M&L for Plain cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate as in fixing of hold fast of door frame in wall all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender