Tender For Addn / Altn / Improvement To Certain Servant Qtrs In Rv Area, Addn / Altn To Certain Toilets In Rv Area, Provn Of Hard Stand Platform Of Mini Armoury And Addn / Altn To Stn Central Registry Af Stn Palam Under Ge (Af) Palam Delhi Cantt - 10
Tender Value
32.60 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
15 days left
EMD
65200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn / Altn / Improvement To Certain Servant Qtrs In Rv Area, Addn / Altn To Certain Toilets In Rv Area, Provn Of Hard Stand Platform Of Mini Armoury And Addn / Altn To Stn Central Registry Af Stn Palam Under Ge (Af) Palam Delhi Cantt - 10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles single layer as in roof covering complete all as specified and as directed. |
| 2 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed. |
| 3 | Taking down chowkhats or frame with shutters (without taking off shutters from the fames) area n. exc. 1.5 sqm each complete all as specified and as directed. |
| 4 | Taking down chowkhats or frame with shutters (without taking off shutters from the fames) area exc. 1.5 sqm but n exc 4.0 sqm each complete all as specified and as directed. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 6 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. complete all as specified and as directed. |
| 7 | Demolition of reinforced cement concrete of any description and in postiion not otherwise specifically provided for complete all as specified and as directed. |
| 8 | Demolition of cement concrete as in floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 9 | Demolition of brick work as in walls/parapet walls built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 10 | Demolition and breaking up drain pipes 75 / 100 /150 mm dia (salt glazed ware, AC or reinforced concrete) set in cement mortar or any type complete all as specified and as directed. |
| 11 | M&L for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 12 | Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion and contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro concrate/general purpose grout as recommended proportionally as per recommendation of manufacturer complete all as specified and as directed. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight. |
| 13 | M&L for 10mm thick cement plaster in cement mortar (1:4) with liquid water proofing compound as per manufacturer's instructions to roof padding, surface finished even and smooth without using extra cement complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid seperately. |
| 14 | Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold appliId of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/sqmm as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin: harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total minimum consumption of 1.25 kg per Sqm complete all as specified and as directed. Note:- Application should be done with Graco sprayer by a company authorised applicator ”. |
| 15 | S&F pressed steel frames of size (125 x 60)mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. |
| 16 | S&F pressed steel frames of size (105 x 60)mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. |
| 17 | S&F 40mm thick flush shutters, solid core construction, with particle board core and plywood face panels, one face with decorative face veneer with lipping/frame to match, on both side complete all as specified and as directed. |
| 18 | S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 19 | S&F 100mm size butt hinges medium weight, cold rolled mild steel complete all as specified and as directed. |
| 20 | S&F 250mm long, aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and as directed. |
| 21 | S&F 150mm size aluminium alloy handles, fabricated type complete all as specified and as directed. |
| 22 | S&F 200mm size tower bolts, aluminium, anodised of extruded section complete all as specified and as directed. |
| 23 | S&F 140mm cover plate floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed. |
| 24 | S&F PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 25 | S&F factory made solid panel PVC door 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed. |
| 26 | S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised snd fixed complete all as specified and as directed. |
| 27 | S&F 125mm size aluminium alloy handles, fabricated type for PVC doors complete all as specified and as directed. |
| 28 | S&F150mm size tower bolts, aluminium, anodised of extruded section for PVC doors complete all as specified and as directed. |
| 29 | S&F 20mm thick factory made PVC flush cupboard shutter with frame consisting panel of hollow section thickness consisting of frame made out of MS tubes of 19 gauges thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top & bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 5mm thick PVC sheet using screws hollow PVC profiles shall be lipped with 10mm (5mm x 2) thick x 20mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof water proof and fire retardant prelam PVC sheet using solvent cement on both sides of the panel etc complete all as specified and as directed. |
| 30 | S&F 125mm size hasp and staple aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws with Cup Board shutter complete all as specified and as directed. |
| 31 | Supplying and fixing steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebated comprises of glazed sutter EWR sec 50mm x 20mm and 1 mm thick and two openable leaf conisting two Nos sash bar of 'T' section 20 mm x 3mm complete welded to frame with one vertical mullion of EWR both 'T' section of size 60mm x 25mm and 1.25 mm thick including cuttings holes and making good to dismantled portion with PCC (1:2:4) type B1- four Nos for each window including following fittings welded to shutter:-(a) Holdfasts 150mm long 12mm x 3 mm made to shape - 4 Nos per window(b) Handle of Z sec 20mm x 25mm, 100 mm long - 1 nos per leaf.(c) MS tower bolt 150mm long - 2 Nos per leaf.(d) 'Z' sec 20mm x 25mm, 100mm long stopper - 01 No per leaf,(e) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 1 No per leaf(f) MS pintal hinges of size 75mm x 12mm - 2 Nos per leaf.(g) fabriction and fixing arrangement complete.Note:- Grill / guard war/ glass pane shall be measured and paid saperately. |
| 32 | Description all as per srl item No. 31.00 above but in gauged shutters without sash bars complete all as specified and as directed. |
| 33 | Description all as per srl item No. 31.00 above but in ventilator (fixed type) complete all as specified and as directed. |
| 34 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work confirming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 35 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 36 | S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and as directed. |
| 37 | M&L for 15mm thick cement plaster in cement mortar (1:6) on internal surface of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed. |
| 38 | M&L for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with liquid water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid seperately. |
| 39 | M&L 5mm thick cement plaster in cement mortar (1:3) as on ceiling, surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 40 | M&L for preparing new plastered surface of walls by applying two coats of oil bound distemper over a coat of primer over 2mm thick cement base wall care putty complete all as specified and as directed. |
| 41 | M&L for preparing new plastered surface of walls and applying two coat of acrylic exterior emulsion paint over a coat of wall primer over 2mm thick cement base wall care putty complete all as speicfied and as directed. |
| 42 | M&L for preparing new plastered surface of ceiling and apply two coats of white wash complete all as specified and directed. |
| 43 | M&L for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 44 | M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 45 | M&L for non skid joint free ceramic coloured tiles of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm and 6-7 mm thick as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed. |
| 46 | Description all as per ser item No. 45.00 above but as on skirting etc with and including over 10mm thick cement plaster (1:4), surface finished even and rough to receive tiles complete all as specified and directed. |
| 47 | M&L for coloured glazed tiles of size (450 x 350)mm x 7mm thick as in vertical surface i.e. skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile over and including rendering 10mm thick in cement morter (1:4), finished rough to fixing tiles complete all as specified and as directed. |
| 48 | M&L for 20mm thick granite (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone with and including over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 49 | M&L for RCC (1:2:4) type B-1 nominal mix using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 50 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 51 | Use and waste iron formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc., also splays between floors and beams etc. complete all as specified and as directed. |
| 52 | M&L for 70 mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in flooring for laying floor finish complete all as specified and as directed. |
| 53 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and as directed. |
| 54 | S&F in vitreous china wash down water closet pan (padestal pattern), white complete all as specified and as directed. |
| 55 | S&F in repair PVC valveless, 10 Ltr capacity, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia including brackets complete all as specified and as directed. |
| 56 | S&F in repair health faucet (ABS Body) cast copper alloy chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook inlcuding making connections and fixed in position complete all as specified and as directed. |
| 57 | S&F in repair vitreous china wash hand basin, white, flat back of size (630 x 450)mm including iron brackets complete all as specified and as directed. |
| 58 | S&F sinks with drainage board made of Salem stainless steel 1mm thick grade A1 S1 305 kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall of including fixing cantilever brackets and connecting union to pipe overall size (915mm x 460mm) bowl size (410mm x 330mm x 160mm) complete all as specified and as directed. |
| 59 | S&F in repair stainless steel kitchen plate rack of superior quality of size (31\\" x 36\\" x 10\\") ISI marked and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 60 | Supply and fixing PVC connection 15mm size with brass nuts of length 600 mm for hot/cold water supply complete all as specified and as directed. |
| 61 | S&F in repair 15mm stop valves, (concealed type) fancy type cast copper alloy chromium plated with long shank and cup screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified and as directed. |
| 62 | S&F in repair 15mm bore angle/stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 63 | S&F CP grating 125mm dia complete all as specified and as directed. |
| 64 | S&F CP soap dish, any type fixed to plugs with chrominum plated brass screws complete all as specified and as directed. |
| 65 | S&F galvanised steel tubing 15mm bore, medium grade with all fittings fixed to wall, ceilings and laid in floors etc including taking down the existing tubing complete all as specified and as directed. |
| 66 | S&F galvanised steel tubing 20mm bore, medium grade with all fittings fixed to wall, ceilings and laid in floors etc including taking down the existing tubing complete all as specified and as directed. |
| 67 | S&F in repair bib tap, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed suitable for 15mm bore iron pipe with long body fancy type complete all as specified and as directed. |
| 68 | S&F in repair pillar taps (swan neck) fancy type cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed . |
| 69 | S&F in repairs brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed. |
| 70 | S&F in repair CP towel racks with lower hanger complete all as specified and as directed. Make-AHS-1581 of Jaquar or equivelent as per list of makes. |
| 71 | S&F chromium plated peg set of 5 (PTMT), fixed with screws and plugging to rear side of door shutter complete all as specified and as directed. |
| 72 | S&F in repair corner glass shelf 300mm (with brass brackets) and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and as directed |
| 73 | S&F in repairs (600mm x 450mm) bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 74 | S&F flexible PVC waste pipe of approved quality 32 bore, 75cm long with one end socketed fixed to waste coupling compete all as specified and as directed. |
| 75 | S&F in repair mild steel pipe 25mm dia curtain rod with PVC coating fixed in the MS hooks, with and including fancy finials/side brackets (both side) of approved shade complete all as specified and as directed. |
| 76 | S&F 20mm dia curtain rails, mild steel, chromium plated, as in cup board with brackets, stops, rollers etc complete all as specified and as directed. |
| 77 | S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) white colour three layered, hoisted and fixed in position including dismantling of existing tanks complete all as specified and as directed. |
| 78 | S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight-210gms.) |
| 79 | S&F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 80 | S&F PVC (SWR) pipes 110mm dia with single socketed in any length with rubber ring joints fixed on brick walls including demolition and breaking up existing pipes complete all as specified and as directed. |
| 81 | S&F PVC (SWR) bends in radius 110 mm bore complete all as specified and as directed. |
| 82 | S&F PVC (SWR) junction single, (Single T) equal or unequal in radius 110 mm bore complete all as specified and as directed. |
| 83 | Excavation in trenches n exc 1.5m wide and n exc1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 84 | M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 85 | M&L for brick works with sub class ‘B’ bricks old size in one brick thick honey comb walling built in CM (1:4) complete all as specified and directed. |
| 86 | Use and waste of form work (fair finished) to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, side and soffits of foundations, plinth beams, roof beam, lintel bend, shelves and similar works vertical or to batter and fair finishing complete in all as specified and as directed. |
| 87 | Use and waste of form work to fair finished concrete flat surfaces of sides of pillars post columns complete all as specified and as directed. |
| 88 | M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in raft foundation, beam, plinth beam, footing, roof beam, lintel band etc complete all as specified and as directed. |
| 89 | M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in column, struts, pillars etc complete all as specified and as directed. |
| 90 | M&L for rendering 15mm thick in CM (1:4) on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 91 | M&L for mild steel TMT bars 5mm dia and over upto 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipsas in stirrup and binders etc complete all as specified and as directed. |
| 92 | M&L for 100mm thick cement concrete (1:4:8) type D2, (using 40mm graded stone aggregate) as in sub base including use and waste of necessary form work complete all as specified and as directed. |
| 93 | M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor etc complete all as specified and as directed. |
| 94 | M&L for non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed (1:6) complete all as specified and as directed. |
| 95 | M&L for digital coloured tiles as in vertical surface exceeding 0.18 Sqm but not exceeding 1.00 sqm, 8 to 10 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering with CM (1: 4) as on vertical surfaces such as skirting, dados, etc complete all as specified and as directed. |
| 96 | M&L for non- skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 97 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 98 | S&F in repair 110mm PVC (SWR) WC connector bent type complete all as specified and as directed. |
| 99 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete all as specified and as directed. |
| 100 | S&F in repair PVC (SWR) 75mm dia bend type complete all as specified and as directed. |
| 101 | S&F 15mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and as directed. |
| 102 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) three layered, white including two tank nipples one at inlet and other at one outlet of 20mm dia complete all as specified and directed. |
| 103 | S&F 75mm size PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 104 | S&F concealed cistern tank with ceramic wall hang/wall mounted designer water closet toilet seat with seat cover of any shape and size complete all as specified and as directed. |
| 105 | S&F in repairs vitreous china counter top basin with single faucet hole of any shape and colour excluding taps waste chain and porcelain stopper but including iron brackets, cutting for pinning in ends of brackets or erecting stand, but exclusive of fixing of supply and waste pipe fixed complete all as specified and as directed. |
| 106 | S&F in repair wall mounted urinal with automatic concealed urinal flusher sensor of any shape and size complete with all accessary and fittings complete all as specified and as directed. |
| 107 | S&F urinal glass partition of size ( 900mm x 450mm x 8 to12mm thick) with bracket complete with all accessary fittings complete all as specified and as directed. |
| 108 | S&F in repairs fixing single-control basin mixer in polished chrome with CP copper connecting pipe 15mm dia chromium plated screwed down, screwed for iron pipe and fixed complete all as specified and as directed. |
| 109 | S&F in repair 15mm bore 1-way bib tap in polished chrome (Singulier) type screwed down screwed for iron pipe complete all as specified and as directed. |
| 110 | S&F in repair bottle trap in polished chrome (Generic) type for WHB including inlet, outlet and union cap etc. 32mm bore complete all as specified and as directed. |
| 111 | S&F in repairs forefront mirror 900mm x 600mm of selected quality glass, frame less bevelled edge mirror fixed with steel stud as per direction complete all as specified and as directed. |
| 112 | S&F in repair toilet paper holder chrome with cover in french gold fixed in position complete all as specified and as directed. |
| 113 | S&F Cruz Liquid Soap Dispenser complete all as specified and as directed. |
| 114 | S&F in repairs (Single) angular concealed stop valves trim in polished chrome high pressure fancy type screwed both ends iron pipe or for unions and fixed 15mm bore etc. complete all as specified and as directed. |
| 115 | S&F in repairs cast iron Nahani trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and as directed. |
| 116 | S&F wash hand basins, vitreous china of size 550mm x 400mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and bedded in red lead cement, PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and as directed. |
| 117 | S&F vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and as directed. |
| 118 | Demolition of stone slab and tiles, laid, bedded and pointed in any mortar of any description and any thickness complete all as specified and as directed. |
| 119 | Dismantling boarding any size or description, fixed in any position or in any thickness, including cover fillets with nails complete all as specified and as directed. |
| 120 | S&F in repair factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cum manufactured by an ISO 900-2008 certified company. One side prelam and other side plain 18 mm thick celuka PVC Ply for kitchen cabinet/ cupboard shutter complete all as specified and as directed. |
| 121 | S&F in repair factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cum manufactured by an ISO 900-2008 certified company. Plain 18mm thick celuka PVC Ply for shelves/partions/drawers complete all as specified and as directed. |
| 122 | S&F 50mm magnaetic catches with brass body and striking plate including letting in as fixed complete all as specified and as directed. |
| 123 | S&F 40 mm size stainless steel piano hinges complete all as specified and as directed. |
| 124 | S&F factory made single extruded WPC (Wood polymer composite) solid door frame chowkhat size (45 x 70)mm comprising of virgin PVC polymer of K value 58-60 ( suspension grade) calculium carbonate and natural fibers ( wood power/ rick husk/ wheat husk) and non toxic additives (minimum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of frame of Class A category with property of bearing termite/borer proof water/ moisture and fibre retardent and fixed in position with MS hold fast/lugs SS dash fasterner of required dia and length complete as per direction of Engineer-in Charge. |
| 125 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade) calculium carbonate and natural fibers (wood power/ rick husk/ wheat husk) and non toxic additives (minimum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum screw withdrawel strength of 1800 N (Face) & 900 N (Edge) minimum compressive strength of 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of frame of Class A category with property of bearing termite/borer proof water/ moisture and fire retardent. WPC to be laminated with PVC foil of minimum 14 Microns thick of approved design pasted with hot melt adhesive on both face of shutter and fixing with stainless steel butt hings of required size complete as per direction of Engineer-in Charge. |
| 126 | M&L for providing and fixing factory made uPVC white colour casement (Openable) door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. |
| 127 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 128 | Returning, filling in trenches including spreading, levelling, watering & well ramming in layers not exc 25cm thick complete all as specified and as directed in soft/ loose soil. |
| 129 | Removing excavated materials to a distance n.exc 50m & depositing where directed at a level n.exc 1.5m above from starting point complete all as specified and as directed in soft / loose soil. |
| 130 | S&F 75mm size butt hinges medium weight, cold rolled mild steel (ISI marked) complete all as specified and as directed. |
| 131 | M&L for preparation of new plastered surfaces of ceiling surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 132 | M&L for complete removal of existing treatment of old decorated external surface of walls by electrically operated grinder including necessary scaffolding complete and applying two coats of exterior emulsion paint over a coat of primer over 2mm thick (avg thickness) cement base wall care putty to obtain even and smooth surfaces including preparation of surfaces complete all as specified and as directed. |
| 133 | M&L for complete removal of existing treatment of old plastered surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over a coat of alkalic resistant primer complete all as specified and as directed. |
| 134 | Supply and fixing 12mm thick gypsum board suspended ceiling system of any shape and size with ISI grade GI framing of intermediate channel (15 x 45 x 15 x 0.9)mm, perimeter channel and ceiling angle (25 x 10)mm section with connecting clip 2.64mm dia including all hardware i.e soffit cleat, rawl plug, edge bead, angle bead, nut & bolt, dry wall screws, hangers etc with all hanging accessories, cut out to made for lighting, fixture and AC grills, including two coats of oil bound distemper over POP/ putty complete all as specified and as directed. |
| 135 | S&F pre- painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bituminous washer complete all as specified and as directed. |
| 136 | S&F steel work in tubular/square/rectangular hollow section/angle iron, tee etc. for structural trusses including special shaped washer etc. complete using ERW or induction butt welded tubes using Fe as per IS 4923, grade YST 310 including necessary machinery for upto 10m height structure complete all as specified and as directed. |
| 137 | Taking down of existing tarfelt and cement plaster of any description and thickness on roof top including flashing and junction of parapet and cleaning existing roof top surface by brooming, wire brushing including removed to out side of MoD land complete all as specified and as directed. |
| 138 | M&L for APP based modified pre fabricated five layer 3mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 160 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm and bonding material 85/25 bitumen 1.2 Kg/Sqm before and after laying membrane laid by torch application side overlap of 75 mm and overlap of 100mm longtitudinally, at the junction of roof and parapet wall a groove of (20 x 20)mm shall be made at the height of 100mm and membrane shall be inserted and sealed with bituminious mastic joints/overlap shall be saled with hot bitumen 85/25 and two coats of water proofing aluminium paint on top of APP membrane complete all as specified and as directed by Engineer -in- charge. |
| 139 | Excavating post holes or similar holes, each not exceeding 0.5 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance n. exc 50m & making good surface complete all as specified and as directed. |
| 140 | Excavating post holes or similar holes, each not exceeding 0.5 cum, getting out in hard rock/ PQC, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance n. exc 50m & making good surface complete all as specified and as directed. |
| 141 | S&F mild steel work rolled section as in main and cross beams, hip and jack, rafter, purlins where connected to common rafters and running rails and guides, fixed with angle cleats or other connecting plates etc conforming to FE 410W (Grade E-250) quality A grade complete all as specified and as directed. |
| 142 | S&F plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 143 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bituminous washer complete all as specified and as directed. |
| 144 | M&L flat iron fillets as in wind ties for roof including securing bolts / screw etc complete all as specified and as directed. |
| 145 | M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in pillars, posts, coping and other similar bands and holdfast block incl necessary form work complete all as specified and as directed. |
| 146 | M&L for hardcore gauge n.exc 63mm of broken stone or boulders deposited, spread and levelled in layers n.exc 75mm thick, watered and well rammed to a true surface complete all as specified and as directed. |
| 147 | M&L for cutting hole into or through brick wall built in cement mortar and making good n exc 150 sqcm cement mortar (1:3) or cement concrete (1:2:4) complete all as specified and as directed. |
| 148 | M&L for cutting chases, pinning in, making good to facings where rerquired and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing complete all as specified and as directed. |
| 149 | M&L for rolled sections as in vertical member, grill work, rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (GdeE-250) quality A complete all as specified and as directed. |
| 150 | M&L for anodized aluminum powder coated (minimum thickness of powder coating 50 micron) windows / ventilator shutter sliding type having 75mm x 44mm x 2.85mm thick stiles bottom rail and top rail including necessary fitting, joinery cleat, glazing packing snap beading 10mm x 10mm, 2 no of anodized aluminum handle 150mm size etc including frame three track of section 100mm x 44mm x 2.85mm with and including 5.00mm thick tinted glass and including aluminum deco grill 50mm x 50mm mesh size complete all as specified and as directed. |
| 151 | M&L for anodized aluminum powder coated (minimum thickness of powder coating 50 micron) door shutter having 150mm x 44mm x 2.85mm thick stiles bottom rail, 150mm x 44mm x 3mm thick middle rail, 100mm x 44mm x 2.85mm thick stile including necessary fitting, joinery cleat, glazing packing snap beading 10mm x 10mm, powder coated aluminum handle 200mm long (02 Nos), 3 Nos 100 mm size chromium plated butt hinges, 2 Nos 200mm size size aluminium tower bolt and double action floor door spring hydraulically regulated including frame of section 100mm x 44mm x 2.85mm and bottom portion covered with 9mm thick prelaminated particle board, interior grade, prelaminate both side with decorative choice lamination (colour / design approved by Engr-in-Charge) fixed to aluminium frame and top portion covered with 5.50mm thick glass and pattern, one mortice latch with two levers brass body (Make : Harrison) and fixing complete all as specified and as directed. |
| 152 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling rose, lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed. |
| 153 | Taking down unserveciable sub main wiring with conduits/battens etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 154 | Taking down unserveciable sub main wiring with conduits/battens etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender