Tender For Resurfacing With Providing Hmp Ready Mix, Laying By Paver And Compaction Of Bc 30 Mm Thick Including Correction Works With Bm 50 Mm Thick Cleaning Of Road Surface And Applying Tack Coat With Bitumen Emulsion Before Laying Bc, Berm Filling
Tender Overview
Project Description
Tender for Resurfacing With Providing Hmp Ready Mix, Laying By Paver And Compaction Of Bc 30 Mm Thick Including Correction Works With Bm 50 Mm Thick Cleaning Of Road Surface And Applying Tack Coat With Bitumen Emulsion Before Laying Bc, Berm Filling And Thermoplastic Paint For Edge Marking Between Km 86.00 To Km 90.00 And Km 91.40 To Km 104.00 (Net Length 16.60 Km) (Shredded Plastic Waste To Be Used For A Length Of 5.00 Km) On Road Tuensang-Mon Under 100 Rcc/15 Brtf Sector Project Sewak In Nagaland State
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying of Tack Coat by using suitable low viscosity paving bitumen of bitumen of appropriate grade not less than @2.5 Kg/10 Sqm conforming to table 505-5 of MORT&H specifications for Road and Bridge Works (Fifth Revision). on existing bituminous surface after cleaning all complete as per Clause 503 of MoRT&H Specifications for Road and Bridge Works (5th Revision) |
| 2 | Providing and Mixing of stone aggregate in Hot Mix Plant, laying mix BC by paver and compaction BC 30 mm thick (Compacted) layer Pre-coated aggregate physical requirement/grading/mix composition confirming to Table: 500-16 and aggregates satisfying the physical requirement of table 500-17 of MORT&H specifications of Road and Bridge Works (Fifth Revision) mixed with minimum 5.4% bitumen (bitumen of appropriate grade as per particular specifications Para 8.2.1) requirement as per Clause 507 of MoRT&H Specifications for Road and Bridge Works (5th Revision) for resurfacing work. Shredded plastic waste @ 8% of Bitumen by weight to be used in Bituminous Concrete Mix without reducing Bitumen Contents as per IRC:SP:98-2020 or latest revised publication. |
| 3 | Providing and Mixing of stone aggregate in Hot Mix Plant, laying and compaction BM 50 mm thick layer Pre-coated aggregate physical requirement/grading/mix composition conforming to Table: 500-7 and aggregates satisfying the physical requirement of table 500-06 of MORT&H specifications of Road and Bridge Works (Fifth Revision) mixed with minimum 3.4% bitumen (bitumen of appropriate grade as per particular specifications Para 3.2.1) by weight of total mix complete in all respect and all as specified and directed by Engineer-in-Charge. |
| 4 | Road Marking with Thermoplastic Paint (2.50 mm thick) conforming to Section 803 of MoRT&H Specifications for Road and Bridge Works (5th Revision) and IRC:35-2015 |
| 5 | Earth work in berm filling with selected earth free from roots etc spreading in layers not exceeding 30 cm including watering, rolling & finishing to required slope conforming to clause 305 of MORT&H Specifications for Road and Bridge Works (Fifth Revision) and notes of Sch ‘A’ and as directed & approved by Engr-In-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender