Tender For Repair And Maintenance To Otm Accn In Armd Regt, Mech Bde And Sig Coy Under The Area Of Age B/R-Ii Of Ge (Army) No.1 Jodhpur.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Otm Accn In Armd Regt, Mech Bde And Sig Coy Under The Area Of Age B/R-Ii Of Ge (Army) No.1 Jodhpur.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed. |
| 2 | Demolition of stone / boulder masonry walling, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed. |
| 3 | Demolition of Cement concrete (including cutting of reinforcement) .in any description and any position not otherwise specifically provided for andremoval unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed. |
| 4 | M&L for precast cement concrete , 1:3:6 solid building blocks type C-1 (20mm graded crushed stone aggregate) not exceeding 10cm thick ,setting in 1:6 cement mortar, complete, in walls complete all as specified and directed. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing broken tiles and removing the all rubbish off from the premises complete all as specified and directed. |
| 6 | M&L for 25 mm thick plain cement concrete1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base to receive floor finishes etc complete all as specified and as directed. |
| 7 | M&L for coloured glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm as per IS 13712 Grade II(a) over and including 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified and directed. |
| 8 | M&L Non-skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 9 | M&L for10mm thick vitrified ceramic double charged dark shade tiles (square/rectangular) area of each tile not exceeding 0.36 sqm,(size of tile 600x600mm) each in floors etc. set and jointed in neat cement slurry, over & including 15mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match complete all as specified and directed. |
| 10 | M&L for 10 mm thick vitrified ceramic double charged dark shade tiles (Square/rectangular) area of each tile not exceeding 0.36 Sqm ,on vertical surface such as skirting / dado etc ,set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles, over & including 10 mm thick backing coat in cement mortar (1:4) etc complete all as specified & directed. |
| 11 | M&L for 18-20 mm thick granite stone ( any colour) as in cooking platforms ,counter slab for oval type WHB,sinks etc & the likes complete laid over & including 15 mm thick cement sand screed bed in CM 1:4 including mirror polishing complete including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite& providing necessary holes for gas pipe / water supply pipes etc complete all as specified and as directed. . |
| 12 | Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc & removal of rubbish out off from site etc complete all as specified and directed. |
| 13 | M&L for rendering 15 mm thick on fair face of brick/stone masonry/concrete surface etc., in cement mortar 1:6, surface finished even & smooth without using extra cement complete all as specified and directed. |
| 14 | M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chaja projection etc all as directed & finished even & smooth complete all as specified and directed. |
| 15 | M&L for prepatation of newly plaster surface of wall and applying two coats of distemper oil emulsion (OBD) any shade over a coat of chalk whitening primer and a layer of wall care putty 2.0 mm thick) to make entire surface free from undulations complete all as specified and directed |
| 16 | M&L for complete removal of old/existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of alkali resistant primer and a layer of wall care putty (not less than 2.0 mm thick )applying by pump roller applicator of any shade or tint complete all as specified & directed. |
| 17 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaces of walls/chajjas/lintel and applying two coats of cement base paint (white or tinted) over a coat of alkali resistant primer, complete all as specified & directed. |
| 19 | Raking out joints/ pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed. |
| 20 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:4 complete all as specified and directed. |
| 21 | S& F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed |
| 22 | S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at PVC frame complete all as specified and directed |
| 23 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to grade Fe 410-W (Gde E- 250) quality A complete all as specified and directed |
| 24 | M&L plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window , bed blocks,fillings of hold fast & similar work etc. including necessary form work complete all as specified and directed. |
| 25 | Dismantling of vertical plain or corrugated steel sheeting, any gauge, or any thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 26 | M&L for pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in as in roof covering/cladding to wall, chajjas ,fixed with self tapping screws,complete all as specified and as directed. |
| 27 | M&L for 0.63 mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 28 | M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks,door frames (made up of angle),balcony railing and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed |
| 29 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples or fixed to anodised aluminium framework of windows / vents & door shutters etc complete all as specified & directed. |
| 30 | S&F 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised ,with hard drawn steel spring,fixed in floor complete all as specified and directed. |
| 31 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed |
| 32 | Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed |
| 33 | S&F 5.0 mm thick coloured figured glass pin headed type in squares/ rectangular not exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete all as specified & directed. |
| 34 | S&F in repair 18/19mm thick block board, grade -2 quality , interior grade, commercial type, fixed with screws to timber frame-work for cupboard shutter, shelf, to aluminum any type of frame work,etc fixed with screws & favicol including making holes with decorative covers for wires where ever required fixed complete all as specified and directed. |
| 35 | S&F powder coated aluminium frame with coating layer of minImum 50 micron thick for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and driected. |
| 36 | S&F powder coated aluminium doors/window shutters, with coating layer of minimum 50 micron thick, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing catching/handles 02 Nos. in each door, hinges, aluminium snap breading, screw etc. complete all as specified and directed. |
| 37 | S& F for Pre powder coated aluminium decogrill all as per sample( or as approved by GE) fixed to aluminium framework of windows & ventilators complete all as specified and directed. |
| 38 | S&Ffor 12 mm thick tinted Toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required accessary handle floor closer machine, floor hings and any required accessories for smooth functioning of door complete all as specified and as directed. |
| 39 | M&L for mild steel flat iron as wind ties ,hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and as directed. |
| 40 | S&F in repairs double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor including cutting of floor for fixing of machine and making good to floor in affected area for aluminium doors complete all specified and directed. |
| 41 | S&F in repair of brass mortice lock, vertical type, size 100 mm long four levers (ISI marked) complete all as specified and directed. |
| 42 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed. |
| 43 | S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 44 | S&F 125 mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty all as per the sample as approved by GE complete all as spd & directed. |
| 45 | S&F 150 mm long aluminium alloy handles of extruted section type, anodised complete all as specified & directed. |
| 46 | S&F 4.0 mm thick sheet glass ordinary quality in squares/ rectangular not exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete etc all as specified & directed. |
| 47 | M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 48 | M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 49 | Taking up or down GI steel /CPVC water tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. |
| 50 | Taking up or down GI steel /CPVC water tubing and connections of 20mm /25 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed. |
| 51 | Supply, laying, testing & commissioning of 16 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge. |
| 52 | Supply, laying, testing & commissioning of 25 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge. |
| 53 | S&F in repair, 15mm bore bib taps ( weight not less than 400 gm) cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 54 | S&F in repair angle stop valve/ angular stop valves of 15mm bore, chromium plated fancy type and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. |
| 55 | S&F in repair stop valve/cock 20mm bore chromium plated fancy type with long shank fancy type cast copper alloy, screwed down high pressure with crutch or butterfly handlt, screwed both ends for iron pipe or for brass ferrule fixed in wall etc complete all as specified and directed. |
| 56 | S&F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed |
| 57 | S&F in repair bevelled edge 6 mm thick looking mirror of selected high quality glass mounted on 6 mm thick ply wood and fixed to wooden plugs with CP brass screw and cup washers complete all as specified and directed. |
| 58 | S&F in repair 22 mm to 25 mm dia stainless steel finish of pipe curtain rod, 1.6 mm wall thickness with best quality knob metal with double fitting type including stainless steel brackets with fancy brackets,stops, rollers etc.(as approved by GE),complete all as specified and as directed. Note: Running length of curtain rod shall be measured & paid only. |
| 59 | S&F in repair vitreous China wash basin with padestal, any colour, flat back size 450 mm X 300 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating,PVC Connection 300 mm long including cutting for & pinning in ends of bracket or errecting bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed. |
| 60 | S&F in repair 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts complete all as specified and directed. |
| 61 | S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down of existing tank complete all as specified and directed. |
| 62 | S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down of existing tank complete all as specified and directed. |
| 63 | Supply only water proofing compound complete all as specified and directed. |
| 64 | M&L for 75 mm thick plain Cement Concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed |
| 65 | M&L for 100 mm thick plain cement concrete (1:2:4) mix, typeB-2 (using 40mm graded crushed stone aggregate), finishing the surfaces even and fair without using extra cement, as in PCC flooring, hard standing including necessary form work of edge, complete all as specified and directed. |
| 66 | M&L for 60 mm thick factory made chamfered edge machine pressed pre-cast concrete coloured interlocking paver block of approved shade & size , laid in design & pattern as in footpath, light traffic parking etc, made by table vibratory method using PU mould of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including 50mm thick compacted bed over fine sand, compacting and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 67 | M&L for rendering 5 mm thick in CM 1:4 on concrete surfaces as in ceiling finished even and fair complete all as specified and directed. |
| 68 | Dismantling wall and ceiling boarding with frame work of any description, fixed in any position with nails/screws complete all as specified and directed. |
| 69 | S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section as under of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 70 | S&F seamless calcium silicate ceiling 8mm thick made out of 1800x1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified. |
| 71 | Note:- (i) All items in BOQ are for \\"Materials and labour / Supply and fix\\" and to be executed in \\"Repairs/Replacement unless otherwise specifically mentioned as \\"Supply only\\" or Fixing only\\" in BOQ Bidders are required to quote their rates accordingly.(ii) The contract sum shall be arrived at after duducting amount of schedule of \\"Credit\\" from the Total quoted amount(iii) Makes of materials will be approved by GE in writing before commencement of work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender