Tender For Provn Of Toilet Near Store Area And Provn Of Shed For Parking Of Als Based Radio Relay Vehicle And Improvement Of Garbage Bins At Pinto Park And C Area Under At Af Station Palam Delhi Cantt-10
Tender Value
19.40 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
3 days left
EMD
38800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Near Store Area And Provn Of Shed For Parking Of Als Based Radio Relay Vehicle And Improvement Of Garbage Bins At Pinto Park And C Area Under At Af Station Palam Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc. 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed. |
| 2 | Excavation in trenches n exc 1.5m in depth and 1.5m in width and getting out in any type of soil complete all as specified and as directed. |
| 3 | M&L for cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed. |
| 4 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in modular bricks in CM (1:6) complete all as specified and as directed. |
| 5 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in \\"half brick\\" thick walls, modular bricks built in CM (1:4) complete all as specified and as directed. |
| 6 | Returning, filling in, including watering and well ramming in layers not exceeding 15cm thick complete all as specified and as directed. |
| 7 | Removing of excavated soil to a distance not exc 50mtrs and depositing where directed at a level not exc. 1.50 mtrs above the starting point complete all as specified and as directed by Engr-in-charge. |
| 8 | M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc.15cm thick including watering and ramming upto a true surface complete all as specified and as directed. |
| 9 | M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations complete all as specified and as directed. |
| 10 | M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including over 15mm thick screed bed in CM (1:6) complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L for glazed coloured ceramic tiles as on vertical surfaces of size (450 x 300)mm x 7mm thick first quality, set and jointed in cement slurry and pointed in white or coloured cement to match the tiles with and including over 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 12 | M&L for 5mm thick rendering in CM (1:3) on concrete surfaces as in ceiling complete all as specified and as directed. |
| 13 | M&L for rendering 15 mm thick on brick surfaces in cement mortar (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 14 | M&L for rendering 15mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10mm thick on brick masonry/concrete surfaces in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately. |
| 15 | M&L for 10mm thick rendering in CM (1:4) over concrete surfaces over roof finished even and smooth with using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed. Note:- Water Proofing compound shall be measured and paid seperately as \\"Supply Only\\". |
| 16 | M&L for APP based polymeric membrane minimum weight 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non-woven fabric (wt not less than 150 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm and finishing with preventive coat with aluminium paint @ 100ml/sqm complete all as directed and specified including cutting chases to wall and making good in CM (1:3) as in vertical surface complete all as specified and as directed. |
| 17 | Supply only Water Proofing Compound complete all as specified and as directed. |
| 18 | M&L for preparation of surfaces and applying 2mm thick cement base wall care putty in two layers on walls/concrete over new plastered surfaces internally complete all as specified and as directed. |
| 19 | M&L for preparation of new plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 20 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 21 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over old/new surfaces of wall including necessary scaffolding required for painting work, safety measures etc. complete all as specified and as directed. |
| 22 | M&L for RCC nominal mix (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 23 | M&L for RCC nominal mix (1:2:4) type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts and the like complete all as specified and as directed. |
| 24 | M&L for RCC nominal mix (1:2:4) type B1 (using 20mm graded stone aggregate) as in roof beams, lintels, cantilevers etc. complete all as specified and as directed. |
| 25 | M&L for RCC nominal mix (1:2:4) type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, chajja, roof beam, roofs, canopies, shelves & the like complete all as specified and as directed. |
| 26 | Use and waste of formwork to side of concrete foundations footings, bases of column, raft and beams, side and soffits of foundation and plinth beams and similar work and finish fair finished to flat surface complete all as specified and as directed. |
| 27 | Use and waste of form work to side of pillars, posts columns etc. complete all as specified and as directed. |
| 28 | Use and waste of formwork to soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, overhangs etc also splays between floors and beams etc. complete all as specified and as directed. |
| 29 | Use and waste of formwork to soffits of suspended slab such as roof slabs, chajja, floor slabs, shelve, landings and similar works n.exc 200 mm thick (horizontal or sloping) complete all as specified and as directed. |
| 30 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bendidng etc and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and as directed. |
| 31 | M&L for mild steel TMT bars 5 to 10mm dia as in stirrup cut to length bent to shape required including cranking, bending etc and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and as directed. |
| 32 | S&F factory made uPVC door frame made of uPVC extruded sections having an overall dimention (extruded section profile) (48 x 40)mm (tolerance +/-1mm), with wall thickness 2.0 mm (+/- .2mm), corners of the door frame jointed with galvanised brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanised M.S. tube of size (19 x 19)mm and 1mm (+/- 0.1mm) wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-Charge. |
| 33 | S&F factory made 24mm thick uPVC door shutters to existing door frames made of styles and rails of a uPVC hollow section of size (59 x 24)mm and wall thickness 2mm (+/- .2mm) with in-built edging on both sides. The styles and rails mitred and jointed at the conrners by means of MS galvanised/plastic brackets of size (75 x 220)mm having wall thikness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size (20 x 20)mm and 1mm (+/-0.1 mm) wall thikness. The lock rail made up of 'H' section, a uPVC hollow section of size (100 x 24)mm and 2mm (+/- 0.2mm) wall thikness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm (+/-mm) wall thinkness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened wtih nuts and washers, complete as specified by the manufacturer and as per direction of Engr-in-Charge. (for W.C. and bathroom door shutter). |
| 34 | M&L for 100mm long butt hinges, medium weight, stainless steel complete all as specified and as directed. |
| 35 | M&L for brass, sliding door bolt with sand or die cast brass hasp, staple (bolt type) length 300mm fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. |
| 36 | S&F 200mm long extruded brass handles, fabricated type polished complete all as specified and as directed. |
| 37 | S&F 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled and cast bolts fixed complete all as specified and as directed. |
| 38 | S&F vitreous china wash down water closet pan (pedestal pattern), any colour with and including fixing bolts, white seat cover, with and including 10 ltr capacity PVC flushing cistern and flush pipe complete all as directed by Engr-in-Charge. |
| 39 | S&F vitreous china Orrisa pan squatting pattern (580 x 440)mm with integral foot rests including P or S trap, with and including PVC low level flushing cistern 10 ltr capacity complete all as specified and as directed by Engr-in-Charge. |
| 40 | S&F urinal, half stall type, white including CP waste coupling, fixed to 15mm dia pipe complete all as specified and as directed. |
| 41 | S&F table top wash hand basin, vitrous china, coloured flat back of size (540 x 360) x 115 to 150mm including brass waste coupling, CP bottle trap, 15mm dia fancy type swan neck pillar taps, cast copper alloy chromium plated fancy type fixed complete all as specified and as directed. |
| 42 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. |
| 43 | S&F chromium plated push type, auto closing concealed urinal flush valve with wall flange complete all as specified and as directed. |
| 44 | S&F chromium plated urinal spreader, fixed to urinal complete all as specified and as directed. |
| 45 | S&F bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete as specified and as dierected. |
| 46 | S&F CP angle/stop valve of cast copper alloy screwed down high pressure with capstan heads screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F stainless steel grating doom 125mm dia complete all as specified and as directed. |
| 49 | S&F chromium plated toilet paper holder complete all as specified and as directed. |
| 50 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 51 | S&F hand shower (health faucet) (ABS chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed. |
| 52 | S&F chromium plated Jet spray with CP connection pipe for EWC 15mm bore with fittings complete all as specified and as directed. |
| 53 | S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for iron Pipe complete all as specified and as directed. |
| 54 | S&F brass chromium plated tubular towel rail 20mm dia including brackets and knobs both side complete all as specified and as directed. |
| 55 | M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 56 | S&F gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and as directed. |
| 57 | S&F GI tubes 20 mm bore 'medium grade' with all fittings and fixed complete to walls and ceilings or laid in trenches or cutting chases in wall and making good to disturbed portion of wall complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F GI tubes 15 mm bore 'medium grade' with all fittings and fixed complete to walls and ceilings or laid in trenches or cutting chases in wall and making good to disturbed portion of wall complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F stainless steel grating doom 125mm dia complete all as specified and as directed. |
| 60 | M&L for cutting chases, pinning in brick, stone, concrete block walls making good to facings where required and pointing in cement mortar (1:3) to concealed water tubing and making good complete all as specified and as directed. |
| 61 | M&L for PVC (SWR) waste and vent pipe 100mm bore in any length with rubber ring joint laid in floor or wall/floor complete all as specified and as directed. |
| 62 | M&L for PVC (SWR) waste and vent pipe 75mm bore in any length with rubber ring joint laid in floor or wall complete all as specified and as directed. |
| 63 | S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and as directed. |
| 64 | S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and as directed. |
| 65 | S&F 110mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 66 | S&F 1000 ltrs capacilty, rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with and including ball brass valve 20mm high pressure with polythene float and fly nut complete all as specified and as directed. |
| 67 | S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & bottom - 20844 (f) Glazing clips - 19352. |
| 68 | M&L for mild steel framed work such as grills, gratings etc. with ends of bars, shouldered or riveted or forged into spikes, framed guard bars barred to windows, iron door, ladders framed balusters, walk ways, railing, frame work for water tank and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 69 | M&L for preparation of new surfaces of steel exc. 10 cm width or girth etc. And applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 70 | S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc. complete all as specified and as directed. |
| 71 | M&L for 4mm thick figured glass, pin head type and glazing not exc 0.5 sqm in each pane to aluminium frame work for ventilators complete all as specified and as directed. |
| 72 | S&F stainless steel wire cloth 0.36mm nominal dia wire & average width of aperature 1.40mm complete all as specified and as directed. |
| 73 | M&L for 150mm dia reinforced concrete pipes, class NP2 with one collar per length of pipe as in sewage line including jointing of pipe with CM (1:4) complete all as specified and as directed. |
| 74 | M&L for concrete bed to drain pipes including pipes under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:4:8) type D-2 for 150mm dia pipe complete all as specified and as directed. |
| 75 | M&L for granite (18-20mm thick) work in counter for cooking & W.H.B platform including rounding and grinding of edges and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite including cutting for hole, rounding of edges and mirror polishing complete all as specified and as directed. Note:- (a) The cost for necessary raking, circular cutting or notching and waste on granite shall be deemed to be included in unit rate. (b) This quantity shall be used for WHB Counter top /cooking platfom Counter top etc. |
| 76 | M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and as directed. |
| 77 | Excavating in post holes (or similar holes) each n. exc 0.50 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm watering and removing surplus soil n. exc 50m and making good the surface in soft/loose soil complete all as specified and as directed. |
| 78 | M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggragates) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 79 | M&L for machine pressed, glossy finished 25mm thick coloured cement concrete chequered tiles of size (300mm x 300mm) of pattern as approved set and jointed with grey cement and pointed with coloured cement to match as in floors with and including laid over cement screed bed of 15mm thick in cement mortar (1:6) with and including over 75mm thick cement concrete (1:4:8) type D2, (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed by Engineer-in-charge. |
| 80 | S&F for mild steel angles/rectangular hollow section/ steel tubular roof trusses (framed), purlines, crane, gantries, rails and fastenings and heavy bracket framing (posts, Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified with and including over applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 81 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 82 | S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / Chajja / cladding to wall, fixed with self tapping screws/'J' hook complete all as specified and as directed. |
| 83 | M&L for providing two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10 cm width or girth etc. complete all as specified and as directed. |
| 84 | M&L for roughening surfaces of old concrete floor by picking, chipping, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed. |
| 85 | M&L for 100mm thick PCC (1:1.5:3) type A-1 (using 20mm graded stone aggregate) as in flooring using dewatering trimix method laid in alternate bay finished even and smooth without using extra cement with and including construction joint at each 2mtr interval. The joint shall be filled with sealing compound Grade 'A' (to full depth) complete all as specified and as directed by Engr-in-charge. |
| 86 | M&L for factory made kerb or mud stop rounded or chamfered on edge with cement concrete (1:2:4) type B1 of approved shape and size complete all as specified and as directed. |
| 87 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc. 1.5 sqm but n exc 4 sqm each and credited to the contractor complete all as specified and as directed by Engineer-in-Charge. Note:- The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface. |
| 88 | M&L for framed MS work as in doors or gates of angle or other section with guesset plates, rails, braces etc, complete drilling for fitting steel sheeting or other covering door etc to be prepaired for hinging or sliding and incl either hooks and hinges or steel hanging door fitting also fastering and fixing with and incuding applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 89 | M&L for mild steel black sheet in door 1.60 mm thick as in steel gate and similar work cut to size, holes punched, including round headed screwed cut nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded seams with and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 90 | Dismantling of plain or corrugated steel sheeting roof covering sheet PGI or asbestos (corrugated, semi corrugated etc.) of any thickness including ridges, hips, valleys as in roof covering complete all as specified and as directed. |
| 91 | Taking down and re- fixing only with fabrication for old mild steel work (FE 290Grade E-165) roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by Engr-in-Charge. |
| 92 | S&F window/ventilator section of frame (72 x 55) mm fixed to wall or concrete surface with MS hold fast (30 x 5) mm section 150 mm long made of galvanised steel powder coated and section of shutter (47 x 20)mm, mulion section (72 x 50)mm (base steel as per IS 513 'D' quality galvanised as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter (Double door shutter) with total coated thickness of 0.60 mm including powder coated grill/guard bars made of square bars 10mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30 x 5)mm fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2. |
| 93 | M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed. |
| 94 | M&L for 50mm thick cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protections, to be finished even and smooth without using extra cement complete including use of necessary form work all as specified and directed. |
| 95 | M&L for 60mm thick glossy finish factory made chamfered edge cement concrete coloured paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 96 | M&L for pre polished chequered cement concrete tiles of size (30 x 30)cm x 25mm thick (glossy finish coloured), set and jointed with grey cement and pointed with coloured cement as in floors with and including over 20mm thick screed bed with CM (1:4) complete all as specified and as directed. |
| 97 | Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed. |
| 98 | M&L for brick work (except bricks), straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 99 | Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed. |
| 100 | Demolition of stone slabs and tiles laid, beded and pointed in any mortar of any description or thicknes in floors, aprons etc complete all as specified and as directed. |
| 101 | Roughening surfaces of old concrete /terrazzo floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed. |
| 102 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab (slab size not less than 55 cm x 55 cm) including rubbing and granite (mirror) polishing complete with and including laid over 15mm thick screed bed in CM (1:4) with a coat of cement slurry @ 3kg/sqm complete all as specified and as directed. |
| 103 | M&L for machine cut kota stone slab flooring 20-25mm thick as in riser of steps, skirting, dado over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite (mirror) polishing complete with and including laid over 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 104 | M&L for preparation of surfaces plastered or unplastered new /old surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade complete all as specified and as directed. |
| 105 | M&L for prepration of new /old surface of plaster and applying three coats of white wash on wall complete all as per specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender