Tender For Repair/ Replacement Of Damage Roofs Incl Roof Treatment, Water Tank, Ac Sheet, Joineries At Namkum And Mh Namkum & Repair/ Replacement Of Bldgs Security Light, Bulk Head, Light Fitting, Point Wirings, Switch Socket, Ceiling Fan/ Exhaust Fa
Tender Value
38 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
17 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Damage Roofs Incl Roof Treatment, Water Tank, Ac Sheet, Joineries At Namkum And Mh Namkum & Repair/ Replacement Of Bldgs Security Light, Bulk Head, Light Fitting, Point Wirings, Switch Socket, Ceiling Fan/ Exhaust Fan Etc At 6/8 Gr Unit Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling AC/CGI/translucent (corrugated or semi corrugated ) sheets in roof covering |
| 2 | Dismantling of timber scantling 40 Sqcm and over in section in any position complete. |
| 3 | M&L roof trusses (framed), trusses, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats, holdfast etc complete all as spd & directed. |
| 4 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, chhaja,etc, fixed with self tapping screws as specified |
| 5 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/velly gutter to wall, fixed with self tapping screws as specified |
| 6 | Material & labour for 6 mm thick asbestos cement corrrugated sheets fixed with' L' or 'J' type or cranked hook bolts as in roof complete all as specified & directed. |
| 7 | Material & labour for 6 mm thick asbestos cement corrrugated sheets fixed with' L' or 'J' type or cranked hook bolts as in roof complete all as specified & directed.(Except sheet only refixing) |
| 8 | Dismantling Wall and ceiling boards of any description and any thickness including cover fillets. |
| 9 | M&L providing aluminum snap Grid frame work for false ceiling with of size 605x605 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with alu anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia MS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues. |
| 10 | M&L 4mm thick Non asbestos fibre designer cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws . |
| 11 | Taking down of chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed . |
| 12 | Taking down of chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed . |
| 13 | Taking down shutterof any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed . |
| 14 | M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 15 | M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 16 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints, supplied & fixed. |
| 17 | Supply & fix second class hard wood 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed . |
| 18 | Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 19 | Supply & fixing Mild steel helical door spring 300mm with roller and roller plate fixed with screws or welded to frame complete all as specified. |
| 20 | S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing . |
| 22 | Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed. |
| 23 | Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed. |
| 24 | Supply & fix 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 25 | Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed. |
| 26 | Material & labour for preparation of new or steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 27 | Material & labour for preparation of new or old untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 28 | M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.including (Minnimum thickness of powder coating 50 Micron) complete all as specified. |
| 29 | M&L powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.including (powder coating not less than 50 micron) complete all as specified. |
| 30 | M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)(Minnimum thickness of powder coating 50 Micron) complete all as specified and directed |
| 31 | M&L Powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc .including (powder coating not less than 50 micron) complete all as specified.. complete all as specified. |
| 32 | S&F 4 lever brass mortice lock vertical type size 65mm long complete. |
| 33 | M&L 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with aluminium frame. |
| 34 | S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed . |
| 35 | S&F 4.0 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete. |
| 36 | S&F 4.00 mm thick Figured glass,pin head type , area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete. |
| 37 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 38 | Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0. |
| 39 | S&F anodised aluminium Grill (anodised transparent or dyed to required shade according to IS:1868 with minimum adodic coating of grade AC 15) of approved design /pattern with approved standard section and fixed to the existing window frame with C.P.brass /stainless steel screw @ 200mm center to centre ,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,all complete as per requirment and direction of engineer in charge all as specified and directed |
| 40 | Taking down aluminium doors shutters only (area exc 1.0 sqm but not exc 2.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed. |
| 41 | M&L PCC 1:3:6 type C1 using 20 mm grade stone aggregate as in hold fast etc |
| 42 | Supply & fix mild steel work as in hold fast etc and similar articles confirming Fe-290 Gde E-165 complete all as specified & directed. |
| 43 | Hacking out old broken glass (any thickness), size quality or description from metal frames incl punching or drilling out glazing pins/springs clips and providing and fixing new ones glazed with putty or fixed with beads complete all as specified and directed . |
| 44 | Supply & fix in repair 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane |
| 45 | Supply & fix 3mm thick sheet glass, frosted type ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane |
| 46 | Supply & fix in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 47 | Supply & fix in repairs Fancy type bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 48 | Supply & fix in reapir 15mm bore Angular Stop valve cast copper alloy fancy type chromium plated, complete all as specified and directed. |
| 49 | S&F in repairs Health faucet(ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified & directed. |
| 50 | Supply & fix in repairs PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. |
| 51 | Supply & fix in repairs chromium plated shower roses with swivel joints of 125mm size complete all as specified & directed. |
| 52 | Supply & fix in repairs PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 53 | Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed. |
| 54 | S&F in repair bib tap 15mm fancy type of PTMT(min wt 15mm-105gms) any colour high pressure screwed for iron pipe and fixed complete all as specified and directed . |
| 55 | Supply & fix in repair for 600 x 450 mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed . |
| 56 | Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed. |
| 57 | Supply & fix in repairs brass chromium plated Central hole basin mixer for mixing hot and cold water screwed for iron pipe suitable for 15 mm bore pipes including pvc connection etc complete all as specified & directed. |
| 58 | Demolition of brick work built in CM incl all quoins arches, pillars etc including removing the same where directed complete all as specified & directed . |
| 59 | M/L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified. |
| 60 | Description all as per above ser item No 59 but except bricks which shall be obtained from demolition here-in-before including removing the mortar & cleaning complete all as specified & directed |
| 61 | Material & labour 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified |
| 62 | Materials & labour for prepration of newely plastered surfaces of wall and applying two coat of Oil Bound distemper on walls, white or tinned over a coat of chalk whiting complete all as specified & directed. |
| 63 | M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 64 | Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified. |
| 65 | Material & labour for chequered cement concrete tiles 30cmx30cmx20-25mm thick set, jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified & directed. |
| 66 | Demolition of Cement concrete of any description and in any position not otherwise specifically provided for |
| 67 | M&L for 100 mm thich PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed |
| 68 | M & L Sand filling under floors including watering and consolidation |
| 69 | M&L Machine pressed precast concrete coloured Inter locking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushion & laid over sub base all as specified and directed. |
| 70 | Description all as per above ser item no 69 but except tiles |
| 71 | M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete. |
| 72 | S&F fancy type sofia bracket for the curtain rod (suitable for 25mm dia) of any color as approved and fixed to rackets all as specified and directed. |
| 73 | S&F in reapir MS conduit curtain rod with PVC coating fancy type drafry rod 25mm dia of any colour as approved and fixed to rackets all as spcd and directed.. |
| 74 | M&L Asbestos cement one piece plain angular ridge 6mm thick Fixed with L-type or J type or cranked hook bolts complete all as specified. |
| 75 | Dismantling timber scantling in fillet,rails,post,rafters,purlin etc under 40 sq cm in section complete |
| 76 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc |
| 77 | M&L rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 78 | 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. Note including scafolding up to G+3 story bldg, etc complete.complete |
| 79 | Materials & labour for prepration of newely plastered surfacea nd finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 80 | M&L finishing walls on Newly Plaster surfaces with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Note including scafolding up to G+3 story bldg, etc complete.complete |
| 81 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore. |
| 82 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 83 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore. |
| 84 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 85 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square Exc 0.5 Sqm in each pane. |
| 86 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares n. exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 87 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 88 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples in repairs. |
| 89 | M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete. |
| 90 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long. |
| 91 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long. |
| 92 | S&F Aluminium anodised handles of extruded section and fixed 150 mm long. |
| 93 | S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 94 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 95 | S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm |
| 96 | M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed. |
| 97 | M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed. |
| 98 | Dismantling water tanks capacity exc 250 ltrs & n exc 500 ltrs and removing from site complete all as specified and directed. |
| 99 | Rotational moulded polythene water storage tanks, three layered (Cylindrical vertical with closed top) of capacity 500 lit, hoisted and fixed in position as in repair complete all as specified. |
| 100 | S& F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed. |
| 101 | S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make |
| 102 | S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink. |
| 103 | Mild steel Powder coated pipes 32 mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed. |
| 104 | S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete |
| 105 | Dismantling water tanks capacity exc 500 ltrs & n exc 1000 ltrs and removing from site complete all as specified and directed. |
| 106 | Rotational moulded polythene water storage tanks, three layered (Cylindrical vertical with closed top) of capacity 1000 lit, hoisted and fixed in position as in repair complete all as specified. |
| 107 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for |
| 108 | Cleaning and removing all scale and dirt etc by using bleaching powder from water tank and from mouth of circulating pipe,etc Capacity of tank n exc 250 litres |
| 109 | Description all as per above ser item no 108 but Capacity of tank exc 250 litres & n exc 500 litres |
| 110 | Description all as per above ser item no 108 but Capacity of tank exc 500 litres & n exc 1000 litres |
| 111 | Description all as per above ser item no 108 but Capacity of tank exc 1000 litres & n exc 2000 litres |
| 112 | Description all as per above ser item no 108 but Capacity of tank exc 2000 litres & n exc 5000 litres |
| 113 | S&F in repair PVC ball valve 15mm dia with epoxy coateed aluminium rod and high density ball (minium weight 142 gms) complete as directed by Engr-in-charge. |
| 114 | S&F in repair PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete as directed by Engr-in-charge. |
| 115 | Demolition of cement concrete of any description and in any position and removing the rubbish from the work site. |
| 116 | 75mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & smooth without using extra cement complete all as specified and directed . |
| 117 | Dismantling brick tiles or terracing tiles /roof covering materialsingle layer on roofs complete all as specified |
| 118 | Scarpping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as directed. |
| 119 | M&L for 10 mm thick plaster in cement mortor 1:3 laid over roof with integral water proofing admixture @ 200 ml per 50 kgs of cement (after the cement is cured the roof will be testd for water tightness by ponding with water for seven days of any seepage/leakage etc.) Note :- supply only water proofing compound shall be measured and paid separately. |
| 120 | M&L Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed. |
| 121 | M&L for two coats of bituminous based aluminum paint on APP membrane all as specified and directed. |
| 122 | M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 for fixing tiles. (Note :- Screed bed shall be mixed with water proofing compound as specified and directed and shall be measured and paid separately) |
| 123 | M&L for 20 mm thick machine cut & polished cement concrete tiles factory made with grey cement without pigment of size 250mm x 250 mm laid in neat cement slurry over screed bed and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of Dr Fixit or tile glue or as per manufacturer instructions complete all as specified and directed. |
| 124 | Taking down carefully exising unserviceable copper/aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 125 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSHH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before. |
| 126 | (a) One light point controlled by one, one way switch 5 Amps |
| 127 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 128 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 129 | (d) One bell point controlled by one, bell switch 5 Amps |
| 130 | (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 131 | Description all as per item No 125 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 132 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-(Contractor should make good even distributed wall/surface as before.) |
| 133 | (a) One light point controlled by one, one way switch 5 Amps |
| 134 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 135 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 136 | (d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 137 | Description all as per item No 127 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 138 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- (Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 139 | (a) One light point controlled by one, one way switch 5 Amps |
| 140 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 141 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 142 | (d) One bell point controlled by one, bell switch 5 Amps |
| 143 | (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 144 | Description all as per item No 129 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLSHH cable as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 145 | S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 146 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 147 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp (set of 3 switches) , including junction box complete all as specified. JAQUAR Cat Part No SWG-GRY-GL16A3G01 , Havells AHLPLCGV03, Anchor 21328WH |
| 148 | S & F for Modular Switch Socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp including junction box complete all as specified. JAQUAR Cat Part No SKG-GRY-GL16ASC1GS1, Havells ACGPTOFV03, Anchor 85366990 |
| 149 | S & F ceiling fan regulator rotary type heavy duty suitable to work on 230 volts AC supply including junction box and removal of old unserviceable one complete all as specified. JAQUAR Cat Part No SWG-GRY-GL1ARFSS, Havells ACYRFHG008, Anchor 84149030 |
| 150 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 151 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 152 | S & F ceiling fan regulator socketed, step type, 1 Module heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one complete all as specified. |
| 153 | S & F ceiling fan regulator socketed, step type, 2 Module heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one complete all as specified. |
| 154 | S & F for Bell push modular 6 Amps single module complete all as specified. |
| 155 | Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 156 | S & F for Lamp holder, PVC body suitable for batten fitting completes all as specified. |
| 157 | S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified |
| 158 | S & F for Switch piano flush type, single pole, one way, and 6 Amp complete all as specified. |
| 159 | S & F for Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified. |
| 160 | S&F in replacement of switch socket combinations flush 5 Amp 5 pin competeI ,ISI marked |
| 161 | S&F switch socket combination 2 in 1, 3 pin, 15 amp multipurpose, flush type, all as specified and as directed |
| 162 | S & F for wall mounted LED tube light fitting not less than 22 W, 220V, 4000K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part phillips BN021 LED22S 4000K PSU GR, Jaquar BTI-WHT-LGLZU1X022XW or Havells- LINEBS22WLED865SPCWH |
| 163 | S & F for wall mounted LED tube light fitting not less than 22 W, 220V, 6500K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part phillips BN021 LED22S 6500KPSU GR, Jaquar BTI-WHT-LGLZU1X022XW or Havells- LUMILINEBS22WLED865SPCWH |
| 164 | S & F for LED lights fitting not less than 20 W, 220V, AC box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Cat Part No Bajaj BCLSB 20 WH, Jaquar BTI-WHTLTBL01X020XC or crompton TCS-109-20-65-SL-DP-NWH. |
| 165 | S & F for LED 10 watts batten with decorative end caps complete all as specified and as directed. |
| 166 | S & F for Highly efficient LED Bulbs, 10 W, of make Bajaj, Havells, HPL complete all as specified and directed |
| 167 | Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed. |
| 168 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSHH cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLSHH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable,one run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 169 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity not less than 25 watts with pre wired, and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat part No Jaquar- OSL-GRY-LPCRSRT25WLC, Bajaj- VISTA P 32L WH PO PC SD, Crompton- TRP-415-25-57-SL-LM-NBK |
| 170 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity not less than 45 watts with pre wired, and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat part No Jaquar- OSL-GRY-LSRT015045XC, Bajaj- VISTA P 58L WH PO PC SD, Crompton- TRP-417-45-57-SL-LM-NBK |
| 171 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity not less than 60 watts with pre wired, and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat part No Jaquar- OSL-GRY-LSRT015060XC, Bajaj- VISTA P 78L WH PO PC SD, Crompton- CRP-421-70-57-SL-LM-NSG |
| 172 | S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Cat part No Jaquar- ILO-BLK-LBLK03X010XW, Bajaj- 112334 BIBWP 10 W LED, Crompton- LBHE-10-CDL |
| 173 | S&F in replacement of UNSV LED Post Top Lantern not less than 35 Watt capacity, with die-cast aluminium housing, polycarbonate opal diffuser, warm white LED, IP-65 protection, complete with electronic LED driver / control gear, having minimum luminous output not less than 3000 lumens, luminous efficacy not less than 80 lm/W, correlated colour temperature (CCT) 3000K (warm white), and opreating volt 140V to 270V, including all necessary accessories such as mounting arrangement, clamps, connectors, cable glands, screws, nuts and bolts, and making all electrical connections complete, , all as specified and directed by Engineer-in-Charge. Make:Havells Cat Part No: VICTORIAPT35WLED757PSYMTOTG, Bajaj BCF FLO 60W NW OPPT, Philips BDP461 LED33 WW110-277V |
| 174 | S&F in replacement of UNSV LED Post Top Lantern 45 Watt power with uniform illumination, made up of pressure die cast alluminium body and opal PC cover having IP 66 protection and IK 07 rating complete all as directed by Engineer- in-charge. Make:- Havells-RINKPT45WLED757PSYMTOPC, Bajaj-BGCPNP 45W LEDWW, Philips BGP200LED45CWPSUGRCPCSPD Please Enable Macros to View BoQ information |
| 175 | S&F in replacement of UNSV LED Post Top Lantern 45 Watt power with uniform illumination, made up of pressure die cast alluminium body and opal PC cover having IP 66 protection and IK 07 rating complete all as directed by Engineer- in-charge. Make:- Havells-RINKPT45WLED757PSYMTOPC, Bajaj-BGCPNP 45W LEDWW, Philips BGP200LED45CWPSUGRCPCSPD Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender