Tender For 8551/E8 Provn Of 135Xmonkey Gate For Pvc Water Tank Of Jcos/Or Md Accn Of Map Mttc Area Of 6 Mdsr, 01Xtoilet Block Consisting Of 02Xbathroom & 03Xurinal Pots, 03Xwash Basin With Mirror Near Pers Line Of 406 Fd Hosp, Toilet Block At Main Ga
Tender Value
37.47 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
18 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 8551/E8 Provn Of 135Xmonkey Gate For Pvc Water Tank Of Jcos/Or Md Accn Of Map Mttc Area Of 6 Mdsr, 01Xtoilet Block Consisting Of 02Xbathroom & 03Xurinal Pots, 03Xwash Basin With Mirror Near Pers Line Of 406 Fd Hosp, Toilet Block At Main Gate Of 116 Engr Regt, Toilet Block Near Bldg No T-205 Birdwood Line , Exhaust Fan In Bldg No P-53, P-54, P-62 & P-119 At Mttc Area , Iron Fram Of Monkey Protection Of Water Tank Of 306 Fd Hosp, Repair Of Bathing Point Near Or Cook House Of 506 Asc Bn Under Ge(E) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Rolled sections as in framing for cladding, glazing, welded wire mesh and the like fixed with angle cleats and connecting plates, etc (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc Fe-410- W(Gde- E-250) quality- B. complete all as specified and directed. |
| 2 | S&F welded steel wire fabric weight n. exc. 4kg/sqm to wood or steel members complete all as spd &directed |
| 3 | M & L for Providing, cement concrete type B1 (1:2:4) 20 mm graded stone aggregate coping in roof kerbs or mud stops, rounded or chamfered on edges complete |
| 4 | M & L for preparation of new steel surface of any description over 10 cm width or girth , not other description applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed |
| 5 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F in repair 15 mm dia steel water tubing galvanized medium grade in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 7 | S&F in repair 20 mm dia steel water tubing, galvanized, medium grade all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 8 | Demolition concrete of any description and in any position not otherwise specifically provided cement concrete |
| 9 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 10 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed |
| 12 | M & L 40 mm thick PCC 1:2:4 type B-1, using 12.5 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed. |
| 13 | M&L 20mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed |
| 14 | M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:4, for laying floor finishes/tiles complete all as specified and directed. |
| 15 | M&L Non- skid vtrified ceramic tiles 10 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors and wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 16 | M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 17 | M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed |
| 18 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as spd |
| 19 | M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed. |
| 20 | S&F in repair MS steel work in tubular trusses for sign board posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240, complete all as specified and directed. |
| 21 | S&F in repair fiber sheets 2 mm thick of any colour having high tensile strength fixed with existing chain link fencing or on post with self screw and nut bolts all necessary fittings complete all as specified and directed. |
| 22 | S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 23 | S&F in repair MS steel work in tubular trusses for monkey cage posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240, complete all as specified and directed. |
| 24 | S&F Welded steel wire fabric weight n exc 4 kg/sqm supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 25 | M&L for Preparation of new steel surfaces exc 10 cm width or girth and applying two coats of syntetic enamel paint over one coat of red oxide or zinc chrome primer complete all as specified and directed. |
| 26 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and getting out soft/loose soil. |
| 27 | Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed. |
| 28 | M&L for cement concrete 1: 4 : 8 type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete. complete all as specified and as directed by Engineer-In-Charge. |
| 29 | M & L for Reinforced cement concrete (Design Mix) with M-25 20 mm graded aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and as directed by Engineer-In-Charge. |
| 30 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte on rough finished flat surface of concrete . complete all as specified and as directed by Engineer-In-Charge. |
| 31 | M & L for Reinforced cement concrete (Design Mix) with M-25 using 20 mm graded aggregates as in Columns, pillars, piers, posts and struts.complete all as specified and as directed by Engineer-In-Charge. |
| 32 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions on rough finished flat surface of concrete. complete all as specified and as directed by Engineer-In-Charge. |
| 33 | M & L for Reinforced cement concrete (Design Mix) with M-25 20 mm graded aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span. complete all as specified and as directed by Engineer-In-Charge. |
| 34 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, wall of mangers etc. complete all as specified and as directed by Engineer-In-Charge. |
| 35 | M & L for Reinforced cement concrete (Design Mix) with M-25 20 mm graded aggregates as in slab complete all as specified and as directed by Engineer-In-Charge. |
| 36 | S&F mild steel TMT bars of 8 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia or securing with clips. complete all as specified and as directed by Engineer-In-Charge. |
| 37 | Ditto,but upto 8 mm dia as in stirrups , spacers and binders. complete all as specified and as directed by Engineer-In-Charge. |
| 38 | M&L Brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM1 : 6 all as specified and directed by Engr-in-Charge |
| 39 | M&L for 15 mm thick cement plaster in CM 1:6 on brick surface finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge. |
| 40 | M&L for 15 mm thick cement plaster in CM 1:4 on brick surface finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge. |
| 41 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed. |
| 42 | M&L hardcore of gouge n exc n exc 63mm broken stone or boulder, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface. |
| 43 | M & L for cement concrete type D-2 (1:4:8) usng 40 mm graded broken stone aggregate 75 mm thick as sub base . complete all as specified and as directed by Engineer-In-Charge. |
| 44 | M & L for coloured Non skid ceramic tiles 7 to 8 mm thick of colour patteren as approved and as per manufacturers catalouge (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floor etc over 15mm thick screed bed with cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engr in charge |
| 45 | M & L for coloured glazed ceramic tiles 300 mm x450 mm & 7 mm thick on vertical surfaces of colour patteren as approved and as per manufacturers catalouge such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-Charge. |
| 46 | S & F Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Coldwith long screwed shanks and flynuts , screwed for iron pipe and fixed of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge. |
| 47 | S&F Cast copper alloy CP angle valve type stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge. |
| 48 | S&F PVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge. |
| 49 | S&F bib tap long body foam flow with flange of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge. |
| 50 | S & F 2 way Bib cock for health faucet with 2 way bib cock of . complete all as specified and directed by Engineer in charge |
| 51 | S&F Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge |
| 52 | S & F soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge. |
| 53 | S & F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and as directed by Engineer-In-Charge. |
| 54 | S & F viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting and 32 mm PVC waste pipe . complete all as specified and as directed by Engineer-In-Charge |
| 55 | S & F vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge. |
| 56 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe.Completed all as specified and directed by Engineer-in-charge. |
| 57 | S&F 10 litres capacity PVC Valveless symphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete complete all as specified and as directed by Engineer-In-Charge |
| 58 | Supply and fixing Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed by Engineer-in-charge.Make:Prayag |
| 59 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment. |
| 60 | S& F PVC (SWR) pipes 110mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed by Engr in charge. (Work will be scattered in varius bldg in Domestic and technical area. |
| 61 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed. |
| 62 | S&F PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed. |
| 63 | S& F PVC (SWR) pipes 75mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed by Engr in charge. (Work will be scattered in varius bldg in Domestic and technical area. |
| 64 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 65 | S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazing cleat and revolving arrangement of standard section of aluminium including rubber packing, aluminium beading or gasket for for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed Aluminium wire cloth etc all as specified and directed by Engineer in Charge. |
| 66 | M&L for two coat of OBD with preparing newly plastered walls surfaces with airless electric sprayers over a coat of primer applied using airless electric spryers over two coat of wall care putty of 1mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through authorised applicator of manufacturer complete all as specified and directed. |
| 67 | Material and labour Material for applying Two coats of cement base paint on newly platered surface by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with max material hose length 30 mtr. The spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturerand accessories for applying cement base paint should be able to spray in hard to reach areas and penetration of cement base paint on the surface to achive excllent application using limited manpower complete all as specified and directed. |
| 68 | Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge. |
| 69 | Supply and fix non return valves of 20 mm dia of ISI mark pipe to existing /new GI pipes including removing and refixing the same pipe for required fitting to fix the valve etc complete and as directed by Engr in charge |
| 70 | S&F in 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete |
| 71 | Supply and fixing in 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated building including necessary complete all as specified and as directed. |
| 72 | M & L for cement concrete type C2 (1:3:6) (40 mm graded broken stone aggregate) 75 mm thick as in plinth protection and finish even and fair all as directed by Engr in Charge |
| 73 | S & F Solid PVC door frame of size 50 mm x 47 mm made out of 10 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing compete all as specified as directed by Engineer -in -charge |
| 74 | S & F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design 2mm thick Prelam PVC sheet on the front face and 2mm thick Plain colour PVC sheet on back face with particle Board core compete all as specified as directed by Engineer -in -charge |
| 75 | S&F in repair fiber-reinforced plastic (FRP) manhole cover with frames (any colour) of overall covered area not less than 0.55 sqm with clear opening not less than 0.36 sqm, any shape (round, square, rectangular etc;) overall weight not less than 25kg each and load capacity not less than 20 tones provided with safe and anti-slippery surface, fire retardant, Anti Corrosive, suitable locking system, and enable clear opening with provision of easy lifting hooks etc; with all necessary fixing arrangements complete all as specified and directed. |
| 76 | S & F 100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified as directed by Engineer -in -charge |
| 77 | S & F 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked compete all as specified as directed by Engineer -in -charge |
| 78 | M & L 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes as specfified |
| 79 | S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised, ISI marked compete all as specified as directed by Engineer -in -charge |
| 80 | Surface dressing n exc 15 cm deep complete all as specified and directed. |
| 81 | M&L Excavation in trenches not exe 1.5 m width or depth and getting out in any type of soil completed all as specified and directed. |
| 82 | M&L RCC 1:2:4 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in foundation footing, Plinth, lintel / roof beam complete all as specified and directed. |
| 83 | M&L for 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars complete all as specified and directed. |
| 84 | Ditto above item No-here in before but 6 to 8 mm dia complete all as specified and directed. |
| 85 | S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves including support over lungs etc also splays between floor and beams etc. |
| 86 | S&F Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed |
| 87 | Hard core broken brick gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 88 | M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 89 | M & L 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 90 | S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box section complete all as specified and directed as appended below:-(a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete. |
| 91 | S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing.(iv) Aluminium neccessary fittings complete as required.(v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 92 | . M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate)as in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete with and including necessary form work etc complete all as specified and as directed. |
| 93 | S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge. |
| 94 | S&F in repair vitreous China coloured European type WC with \\"P\\" or \\"S\\" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. |
| 95 | S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed. |
| 96 | S&f Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as spd and directed. |
| 97 | S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. |
| 98 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 |
| 99 | S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 100 | S&F 500 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size ), hoisted and fixed in position complete all as specified and directed |
| 101 | S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified. |
| 102 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 103 | S&F in repair 15 mm dia fancy type Angle cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed. |
| 104 | S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 105 | S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed |
| 106 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 107 | M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed. |
| 108 | M&L for preparing newly plastered walls surfaces and applying two coats of exterior emulsion over a coat over 1mm thick cement based wall care putty complete all as specified and directed. |
| 109 | M&L for Formwork for chullah hoods, chajjas through and similar items including edges, surface rough finish surfaces to receive the plaster, complete all as specified and as directed. |
| 110 | M&L for Form work to soffits of suspended slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), rough finish surfaces complete all as specified and as directed. |
| 111 | M&L for providing RCC 1:1-1/2:3 type B1 (using 20mm graded stone aggregate) as in foundations, including raft footings, foundations beams, plinth beams, bases of columns etc; complete all as specified and as directed. |
| 112 | M&L for providing RCC 1:1-1/2:3 type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc; complete all as specified and as directed. |
| 113 | M&L for providing RCC 1:1-1/2:3 type B1 (using 20mm graded stone aggregate) as in beams, lintel up to 1.5m clear span, lintel bands etc; complete all as specified and as directed. |
| 114 | M&L for providing RCC 1:1-1/2:3 type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in roof, landings, balconies, canopies and in shelves etc; complete all as specified and as directed. |
| 115 | M&L for providing RCC 1:1-1/2:3 type B1 (using 20mm graded stone aggregate) as in chajjas etc; complete all as specified and as directed. |
| 116 | M&L for carrying out water proofing treatment for roofs in the following stages -(i) Rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. (ii) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surafces(iii) Second layer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight 3 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed.(iv) Finally applying two protective coats of bituminous aluminium based reflective paint to safeguard against UV, including preparing of old surfaces of roof remove all corrosion products brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing , rubbing down and stopping of painted surfaces (second coat apply after 24 hrs or as per manufacturing instructions). |
| 117 | Supply only integral water proofing liquid ISI marked Make: Pidiproof LW |
| 118 | Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm each layer in hard/dense soil all as specified and directed. |
| 119 | Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed. |
| 120 | M&L for 15 mm thick rendering on stone/ brick masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed. |
| 121 | M&L for rendering 15 mm thick in CM 1:6 finished even without using extra cement over stone wall surfaces all as specified and as directed. |
| 122 | M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 123 | M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified. |
| 124 | M&L for PCC 1:2:4 type B0 25 mm thick using 12.5mm graded stone aggregates as in sub floors/base floors under tiles as in levelling course etc all as specified and directed. |
| 125 | M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 126 | M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed. |
| 127 | M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 128 | Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified. |
| 129 | M & L for 75 mm, dia PVC (SWR) floor trap, plain with SS grating including jointing with solvent cement. complete all as specified and as directed by Engineer-In-Charge (Trap shall be sealed properly with the existing pipe and got tested by Filling with water) |
| 130 | Supply and fixing Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed by Engineer-in-charge. |
| 131 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment. |
| 132 | S&F Bib tap,15mm bore, fancy type, brass chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 133 | S&F Angle valve,15mm bore, fancy type, brass chromium plated, concealed type, with long shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 134 | S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends with iron pipe complete all as specified and as directed. |
| 135 | S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends with iron pipe and fixed complete all as specified and as directed. |
| 136 | S&F for Pillar tap, brass, 15mm dia, with capston heads, chromium plated, fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin complete all as specified and as directed. |
| 137 | PVC connection, 15mm size, with PTMT nuts, of length 450 mm long complete all as specified and as directed. |
| 138 | S & F vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge. |
| 139 | Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed. |
| 140 | S&F PVC flushing cistern, low level,10 litres capacity , valveless, syphonic action type, white, with inlet, ball valve, float, handle, flush pipe of polythlene of low or high density or PVC, 32 mm dia complete all as specified and as directed. |
| 141 | Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. complete all as specified and as directed. |
| 142 | S&F Looking mirror of selected quality glass, 600x450 mm size with suitable covering alround, fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 143 | S&F CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified and as directed. |
| 144 | S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed. |
| 145 | S&F in repairs, vitreous China bowl urinal flat back size 430x370x340 with grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified and directed. |
| 146 | S&F CP greating doom 100mm dia complete all as specified and as directed. |
| 147 | S&F chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc; complete all as specified. |
| 148 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) complete all as specified and as directed. |
| 149 | M&L for fabrication of aluminium powder coated window/ vents any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type, ventilators) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position all as specified and directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch 'A'. |
| 150 | S&F for figured glass, pin head type ordinary quality, 4mm thick, area of each pane not exceeding 0.5Sqm and glazing with aluminium beading in aluminium frame all as specified and as directed. |
| 151 | S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed. |
| 152 | S&F of factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing S&F. Make : Rajshree Doors or equivalent as approved by GE. |
| 153 | S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make : Rajshree Doors or equivalent as approved by GE. |
| 154 | S&F of 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges all as specified and directed. |
| 155 | S&F aluminium, anodised, barrel tower bolt of extruded section, 150mm long all as specified and as directed |
| 156 | M&L for 100mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified. |
| 157 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade as approved by GE , laid over 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed. |
| 158 | M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar 1:4 for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge. |
| 159 | M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified. |
| 160 | M&L for Reinforced concrete pipes, of 150mm bore, class NP2, laid in trenches and jointed in cement mortar as specified complete with collars complete all as specified. |
| 161 | M&L for cement concrete (1:4:8) type D-2 for 150mm dia pipe bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in complete all as directed and specified |
| 162 | S&F in repair fiber-reinforced plastic (FRP) manhole cover with frames (any colour) of overall covered area not less than 0.55 sqm with clear opening not less than 0.36 sqm, any shape (round, square, rectangular etc;) overall weight not less than 25kg each and load capacity not less than 20 tones provided with safe and anti-slippery surface, fire retardant, Anti Corrosive, suitable locking system, and enable clear opening with provision of easy lifting hooks etc; with all necessary fixing arrangements complete all as specified and directed. |
| 163 | Cutting into existing manhole for connecting new drain pipe (150mm Internal dia of pipe), making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc; complete all as specified. |
| 164 | Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces all as directed by Engr in charge. |
| 165 | Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces all as directed by Engr in charge. |
| 166 | Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling complete all as specified. |
| 167 | M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, suitable for fixing of Modular type switches / sockets etc, complete all as specified and directed for the following :- Note : 1. Rate quoted shall deemed to be inclusive of Modular white cover plate, sunken box.2. Rate quoted shall deemed to be inclusive of cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. |
| 168 | All as per serial item No 167 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge. |
| 169 | S&F Modular Switch 1 way 16 Amps, 1 Module size complete all as directed.. |
| 170 | S&F Modular Socket 6A/16 A, 5 Pin ,2 Module size complete all as directed.. |
| 171 | S&F Modular Switch 1 way 6 Amps, 1 Module size complete all as directed.. |
| 172 | Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 173 | Supply and fix exhaust fan made of iron body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. |
| 174 | M & L , Painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc including Hanging ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan |
| 175 | M&L of cutting of wall and make hole of suitable size for fitting exhaust fan and make surface good, white washing all as required at site. |
| 176 | Supply and fixing angular lamp holder, metal cased body of brass with back plate in batten fittings, including Plastic square box of required size complete all as specified and directed by the Engineer-in-Charge |
| 177 | S&F LED Bulb 9 Watt |
| 178 | S&F in replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 nos MS clamp made of MS flate iron of 50 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer, complete all as directed. |
| 179 | S&F in replacement LED street light luminaire of 35 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge. |
| 180 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 181 | Supply and fixing in replacement sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete complete all as specified and as directed by the Engr-in-Charge.. |
| 182 | Supply and fixing in replacement SPN 40 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 183 | Supply and fixing in replacement SP 5 to 32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 184 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2020 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion . |
| 185 | Supply and fix exhaust fan made of iron body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. |
| 186 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6 sqmm all as specified and directed by Engr-in-Charge. |
| 187 | Supply and fixing galvanised steel tube of size 20 mm medium grade including all accessories all as specified and directed by Engr-in-Charge. |
| 188 | Supply and fixing angle cock of size 20 mm cast stainless steel, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender