Tender For Provn Of Drainage Sys At Div Hq Area At Old Amritsar Cantt.
Tender Value
38.13 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
8 days left
EMD
76260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Drainage Sys At Div Hq Area At Old Amritsar Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil not exceeding 1.5 meters wide and not exceeding 1.5 meter depth for foundation drain etc. getting out and forming bottom surfaces to required gradient complete all as specified and as directed. |
| 2 | Material & LabourPCC M-15 (1:2:4) using 40 mm graded stone aggregate as in surface channel , PCC drains, benching, and PCC bend for top of manhole brick work etc with slightly chamfered or rounded angles including necessary form works, if any and finishing exposed surface even and smooth without using extra cement etc complete all as specified and directed. |
| 3 | Material & Labourdesign mix (M30) conrete for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. |
| 4 | Material & Labourdesign mix (M30) conrete for walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc complete all as specified and directed. |
| 5 | Material & Labourfor TMT bars 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire as in straightening bars ( annelaed) not less than 0.9 mmd ia or securing with clips etc complete all as specified and directed. |
| 6 | Supply & fixing Mild steel TMT bar 10mm dia and above cut to length, bent to shape rquired including cranling , bending spirally for hooping for column , hooking ends and binding with mild steel wire not less than 0.9mm dia complete all as specified and directed. |
| 7 | Removing surplus soil to a distance exceeding 500 meter and not exc 1.0 km depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed. |
| 8 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil etc complete all as specified and directed. |
| 9 | Supply, laying and jointing 300mm bore RCC pipes class NP3 complete with collars laid in trenches and testing complete all as specified and directed. |
| 10 | Material and labour for concrete bed for 300mm bore pipe in cement concrete 1:4:8 type D-2 to drain pipe including packing under and complete surrounding pipe with concrete after they are laid and tested complete all as specified and directed |
| 11 | Material & Labourfor sub class B brick old size brickwork with straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 12 | Material & Labourfor rendering 15 mm thick on brick work on walls in CM 1:4 finishing even and smooth with using water proofing compound complete all as specified and directed. |
| 13 | Material & Labourpre cast reinforced cement concrete (1:2:4) B-1 Type using 20mm graded stone aggregate as in perforated drain cover and set in cement mortar (1:4) including necessary form work, complete all as specified and directed. (Note: Reinforcement shall be mearsured & paid separately) |
| 14 | Formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, fair finish surface complete all as specified and directed |
| 15 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 16 | Unplasticiscd PVC pipes (50 mm )of pressure rating 10 Kilogramf/cm2 laid in trenches/weep holes complete all as specified and directed. Supply & fixing1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete, but gear operated type with bevel gear box and crank handle,etc,complete all as specified directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender