Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #56553761

Tender For Provn Of View Cutter On Boundry Wall Of Bldg No. P-169/2, Mall Rd, Appt House Under Age B/R-Ii Ge(North) Ambala Cantt.

Issued by Statutory Bodies & Commissions/Committees · Ambala, Haryana
Tender Value
2.66 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
10 days left
EMD
5320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of View Cutter On Boundry Wall Of Bldg No. P-169/2, Mall Rd, Appt House Under Age B/R-Ii Ge(North) Ambala Cantt.

BOQ

Name of Work:- Provn of view cutter on boundry wall of Bldg No. P-169/2, Mall Rd, Appt house under AGE B/R-II GE(North) Ambala Cantt.
Sl. No. Item Description
1Excavating in post holes (or similar holes) in soft/loose soil,each not exceeding 0.5 cum, getting out and removing surplus soil to a distance not exceeding 50m and making good surface, complete all as specified and as directed.
2Material and labour for PCC (1:3:6), Type C-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete, all as specified and as directed.
3Material and labour for mild steel work in hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe 290 Gde E-165, complete, all as specified and as directed .
4Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 05 cm but not exc 10 cm long , diameter of neck 05 to 10 mm, complete all as specified and as directed.
5Material and labour for preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete, all as specified and as directed .
6Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having zinc coating 150 grams per Sqm (Az 150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
7Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.
8Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed .
9Supply and fixing precast cement concrete louvres and jallies,25mm thick in PCC (1:3:6), type C0 (12.5mm graded stone agg.) set in cement mortar (1:6) as in reapir, including all mouldings, but excluding frame, complete all as specified and directed .
10Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and as directed .
11Material and labour for rendering 15mm thick in cement plaster 1:4 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement complete all as specified and as directed .
12M&L rough cast plaster complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply 10mm thick under coat using ready mix mortar while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed .
13Material and labour for preparation of new plastered /concrete surface of wall applying of two coats of cement base paint over a coat of alkali resistant primer chalk whitening complete all as specified and directed.
14Note:- Amount of credit of Rs.720.00 for retrieved materials is mentioned in Schedule of Credit Page No.123 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56553761
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 2.66 Lakhs
LAST DATE 11-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of View Cutter On Boundry Wall Of Bldg No. P-169/2, Mall Rd, Appt House Under Age B/R-Ii Ge(North) Ambala Cantt.
Basic Detail
Tender No GE(N)/AMB-61/2026-27
Bidding Type Tender
Location
City Ambala
State Haryana
Key Dates
Publish Date 18 Jul 2026
Submission Date 11 Aug 2026
Open Date 13 Aug 2026
Finance
Tender Value 2.66 Lakhs
Tender Fee 500
EMD 5320
Exemption Available
Document List
40cf3b95-3540-43ad-81a5-4e9ea3457b53.html
BOQ_873134.xls
Tenderdocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Aug 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

40cf3b95-3540-43ad-81a5-4e9ea3457b53.html

xls

BOQ_873134.xls

pdf

Tenderdocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders