Tender For Smart Periodical To Offrs Md Accn In Sector A Of Age B/R-Ii Under Ge (North) Ambala Cantt
Tender Value
29.90 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
10 days left
EMD
59800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Periodical To Offrs Md Accn In Sector A Of Age B/R-Ii Under Ge (North) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD and including necessary scaffoldings complete all as specified and directed |
| 2 | Material and labour for 15mm thick cement plaster in cement motar 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) where directed by EIC, complete all as specified and directed. incl WPC @ 200 mili litre per 50kg cement bag or as manufacture instruction Note-WPC will be measured and paid separately under appropriate items. |
| 3 | Material and labour rough cast plaster complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and labour for 15mm thick cement plaster in cement motar (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed |
| 5 | Material and labour for preparation of newly plastered wall surfaces and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour with 2 mm thick wall care putty to achieve even and smooth surfaces complete, as per manufacturer's specification over a coat of primer complete all as specified and directed. |
| 6 | Material and labour for 5 mm thick cement plaster in cement motar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc incl complete all as specified and directed |
| 7 | Material and labour for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 8 | Material and labour for preparation of old plastered ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 9 | Supply only water proofing compound complete all as specified. |
| 10 | Demolition of brick work or stone /boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 11 | Material and labour brick work with sub class 'B' old size bricks, built in CM 1:6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. |
| 12 | Complete removal of existing treatment of any description, any number of layers from walls upto 15m height by complete removal of existing treatment by scrapping and cleaning with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc by skilled labour incl washing down with water to make surface dust free. incl material and labour for preparation of surface on walls and applying two coats of acrylic distemper over a coat of primer over and including 1-2 mm thick interior grade wall putty white cement based in one or two coats to achieve smooth surfaces complete, all as specified and as directed. |
| 13 | Complete removal of existing treatment of any description, any number of layers from walls, chajja, cornice, parapet wall upto 15m height by complete removal of existing treatment by scrapping and cleaning with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc by skilled labour incl washing down with water to make surface dust free incl material and labour for applying two coats of exterior apex ultima protek emulsion using spray gun to all external walls/chajja/projection/parapet wall surfaces, of approved shade/colour over a coat of damp sheet exterior primer including preparation of surface over and including 2-3 mm thick water proof wall putty to give smooth and even surface upto 15m height, complete all as specified and directed . |
| 14 | Complete removal of existing treatment of any description, any number of layers from walls upto 15m height by complete removal of existing treatment by scrapping and cleaning with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc by skilled labour incl washing down with water to make surface dust free incl material and laour for applying two coats of exterior apex ultima protek emulsion using spray gun to all external walls surfaces, of approved shade/colour over a coat of damp sheet exterior primer including preparation of unplastered old decorated surface upto 15m height, complete all as specified and directed . |
| 15 | Preparing new plastered surface of any description upto 15m height scrapping and cleaning to make free from dust, incl material and labour for applying two coats of exterior apex ultima protek emulsion using spray gun to all external walls/ceiling surfaces, of approved shade/colour over a coat of damp sheet exterior primer including preparation of new plastered surface and including 2-3 mm thick water proof wall care putty to give smooth and even surface upto 15m height, complete all as specified and directed . |
| 16 | Preparing new plastered surface of any description upto 15m height scrapping and cleaning to make free from dust, incl material and labour for applying two coats of exterior apex ultima protek emulsion using spray gun to all external walls/ceiling surfaces, of approved shade/colour over a coat of damp sheet exterior primer including preparation of new plastered upto 15m height, complete all as specified and directed . |
| 17 | Material and labour for applying two coat of cement base paint including preparation of newly plasterd or previously untreated surfaces of walls, pillars over a coat of alkali resistant primer etc complete all as specified and directed. |
| 18 | Material and labour for applying one coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. |
| 19 | Material and labour for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 20 | Material and labour for preparation of old decorated steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 21 | Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any situation floor (including provn of support, with chicken wire mesh and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, and plastering (1:4) finished even and smooth to desired shape to match with existing surfaces complete all as specified and directed. |
| 22 | Taking down PVC (SWR) pipe any dia and description including all fittings with spigot and socket ends and lead in any position all as specified and as directed, |
| 23 | Supply & fixing 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, rubber ring joints fixed to walls with clamps complete all as specified and as directed. |
| 24 | Supply and fixing 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 25 | Notes for Srl Item NO. 12 to 16 :–The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :–(a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE.(b) The Contractor shall upload with the documents under cover I \\"Memoradum of Understanding\\" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(d) Removing of Nails, making good holes, cracks etc(e) Work in patches and in narrow /widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery, electric fittings, wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer–in–Charge.(h) Sample patch of 10sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. |
| 26 | Note:- Amount of credit of Rs.4700.00 for retrieved materials is mentioned in Schedule of Credit Page No.104 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender