Tender For Repair And Renovation Of Selaiyur Mcc Ward No 46,Arul Nagar Mcc Ward No 62, Double Road Mcc Wardno 64,Ambedkar Burial Ground Mcc Ward No 65 ,Eb Road Mcc Ward No 70 In Tambaram City Municipal Corporation
Tender Value
21 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
14 days left
EMD
21000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Selaiyur Mcc Ward No 46,Arul Nagar Mcc Ward No 62, Double Road Mcc Wardno 64,Ambedkar Burial Ground Mcc Ward No 65 ,Eb Road Mcc Ward No 70 In Tambaram City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Repair and Recondition of M.S Doors with one coat of cost and conveyance of all materials to site etc,complete as per standard specification. |
| 2 | Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying,nsolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete multiplying with standard specification and as directed by the departmental officers. The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers -Mixing by Manual means |
| 3 | Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 4 | Supply and fixing of Pvc Specials for MCC Tub including cost and conveyance of all materials and labour charges etc complete. |
| 5 | 90mm pvc Pipe |
| 6 | 90mm Tee |
| 7 | 90mm cowl incl |
| 8 | 90mm Elbow |
| 9 | Supply and fixing of 18W 4 Feet LED Fitting with LED including cost and conveyance of all materials and labour charges etc complete. |
| 10 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD 108 |
| 11 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\\"X43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 12 | Plastering with cement mortar 1:5 (One Cement, Five Sand) 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications. |
| 13 | Painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. |
| 14 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 15 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.110mm dia |
| 16 | Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications. |
| 17 | 110mm dia PVC Elbow |
| 18 | 110mm dia PVC Tee |
| 19 | 110mm dia PVC Bend |
| 20 | Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 32mm pvc pipe |
| 21 | Supply and Fixing of pvc Specials including cost and conveyance of all materials and labour charges |
| 22 | 32mm Pvc Elbow |
| 23 | 32mm Pvc Tee |
| 24 | 32mm Pvc coupler |
| 25 | Supply and Fixing of RO in MCC including cost and conveyance of all materials and labour charges etc complete |
| 26 | Supply and Fixing of Fly Catcher in MCC including cost and conveyance of all materials and labour charges etc complete |
| 27 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc |
| 28 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 29 | Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 and above 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by the departmental officers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 30 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 31 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 32 | Supply and Fixing of MS Sqaure Name Board including cost and conveyance of all materials and labour charges etc complete |
| 33 | Art Painting in Entrance Arch including cost and conveyance of all materials and labour charges etc complete |
| 34 | Supply and Fixing of Starter in Hydraulic Machine Starter including cost and conveyance of all materials and labour charges etc complete |
| 35 | Supply, Delivery and Fixing of Conveyor Belt in MCC Machineries Starter including cost and conveyance of all materials and labour charges etc complete |
| 36 | Dismantling the Existing Plain Cement Concrete including cost and conveyance of all materials and labour charges etc complete |
| 37 | Plain Cement Concrete 1:2:4 Using 20mm Metel including cost and conveyance of all materials and labour charges etc complete |
| 38 | Supply and Delivery of Writing Table in MCC Machineries Starter including cost and conveyance of all materials and labour charges etc complete |
| 39 | Supply and Delivery of Sitting PVC Chair in MCC Machineries Starter including cost and conveyance of all materials and labour charges etc complete |
| 40 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cabl e of 1100 V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuouse arth wire connection of 1.5sq.mm copper wire for open PVC light point /fan point (for electronic regulator) SD No:13 |
| 41 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets.Shutter using 5mm thick solid PVC Sheets for panellingshall rigidly fixed in position including necessary furnitureand fittings. The over all size of styles shall be 50mm x30mm. The over all size of top rail, lock rail and bottomrail shall be 75mm x 30mm. The over all size of framesshall be 50mm x 45mm with suitable rabate for housingthe shutter ` Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender