Tender For Tender Forspecial Repair Works To Tnmsc District Drug Warehouse At Perundurai (Erode).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jul 2026
2 days left
EMD
1000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender Forspecial Repair Works To Tnmsc District Drug Warehouse At Perundurai (Erode).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Brick work |
| 2 | Earth work excavation (narrow) for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 3 | 0 to 2 m depth |
| 4 | Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 10 cm thick well rammed, consolidated and curing etc. complete complying with standard specification . |
| 6 | Providing and laying in position , standardised concrete mix M-25 grade in accordance using 20mm with IS:456-2000 ,and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350kg/ms and maximum water cement ratio of 0.5, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate , retard setting of concrete , improve workability without impairing strength and durability with about 5 cu.m 7730 kg of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7676kg of sand but excluding cost of reinforcement grill and fabricating charges , centering and shuttering and also including laying , vibrating with mechanical vibrators, finishing , curing, etc. and providing fixtures like fan clamps in the RCC floor/roof slabes wherever necessary without claiming extra , etc complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No seperate payment will be made by the department for the excess usage of materials). |
| 7 | Foundation and basement |
| 8 | For Ground floor |
| 9 | Brick work in following Cement Mortar using best quality Fly ash Bricks230 *110*75\\" foundation and basement including curing, etc., complete complying with standard specifiction. |
| 10 | For Ground floor |
| 11 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
| 12 | For Column footings, plinth beam bed blocks templates staircase, steps piers raft beam raft slab etc., |
| 13 | For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. |
| 14 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 15 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 16 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 17 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 18 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 19 | Supplying and fixing in position best quality and approved make Lipped Mouth porcelain Flat Back Urinal with all accessories such as 32mm dia bell Mouth PVC connection, 15mm dia GM wheel Value, 15mm dia 'B' class GI waste water pipe, 15mm dia Nylon connection, 15mm dia brass nipple etc. (It should be got approved by Executive Engineer before use on works). |
| 20 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 21 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 22 | Supplying and fixing in position 15mm dia CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 23 | Supplying and fixing in position of best Indian make beveled edge mirror of approved quality of size 500*400mm of 5.5 thick glass with necessary teakwood ply backing rubber buttons screws, plugs etc. complete complying with standard specification. |
| 24 | Supplying and fixing in position first quality and approved variety gun metal gate valve (Heavy type) Wheel valve (Heavy Duty) with Mark of apporved quality of the following dia including cost of shellac, thread, labour charges for cutting, threading fixing in position etc., complete complying with standard specification and as directed by the Departmental officer for both internal and external water supply arrangements. |
| 25 | Supplying, laying and jointing UPVC pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing UPVC Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The UPVC pipes shall be got approved by the Executive Engineer before use on work. . Above Ground Level. |
| 26 | 20mm dia UPVC Pipe |
| 27 | 25mm dia UPVC Pipe |
| 28 | Supplying and fixing in position UPVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the UPVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The UPVC specials should be got approved by the Executive Engineer before use on works). |
| 29 | 20x15mm dia Reducer |
| 30 | 20mm dia Elbow |
| 31 | 20mm dia Tee |
| 32 | Supplying and fixing in position CP Two way Bib Cock with Health Faucet with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the Departmental Officer |
| 33 | Supplying and fixing in position of best quality and approved variety of PVC Cylindrical Water Tanks of 1000 Litres capacity conforming to I.S.I. Specifications with necessary inlets and outlets and overflow, cleaning pipe arrangements and labour charges for fixing in position etc., and properly fixed in the floor top as directed by the departmental officers. |
| 34 | Supply and Fixing For Raniwater pit Cover of Thickness 100mm |
| 35 | supplying and providing guard rail at loading &unloading platform with 100x45mm channel and 100x37.5 mm seasoned country wood fixed over MS channel |
| 36 | Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 37 | Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheets of fully corrugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed. |
| 38 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 39 | Repair work for Aluminium Doors and window. |
| 40 | Repair work for MS Gate |
| 41 | Drilling of 150mm (6\\") dia vertical bores in hard rock areas to any required depth as directed by the departmental officals. The rate is inclusive of assembling the equipment in the point as selected, drillingbore, labour charges for inserting casing pipe of necessary and also tranportation charges for the rig and supporting vehicle to the bore point etc., complete complying with standard specification.Drilling of 150 mm Pilot Bore |
| 42 | Upto 60 m (196.8 Ft) Depth ending below ground level |
| 43 | From 60 m (196.8 Ft) upto 90 m (295.2 Ft)Depth ending from ground level |
| 44 | From 90 m (295.2 Ft) upto 120 m (393.6 Ft)Depth ending from ground level |
| 45 | From 120 m (393.6 Ft) upto 150 m (492 Ft) Depth ending from ground level |
| 46 | From 150 m (492 Ft) upto 180 m (590.4 Ft) Depth ending from ground level |
| 47 | From 180 m (590.4 Ft) upto 210 m (688.8 Ft) Depth ending from ground level |
| 48 | Supply and erecting of 19mm dia Nylon PVC Rope with approved Quality inside the bore well etc completed. |
| 49 | Supplying suitable PVC casing pipe for 6\\" dia borewell (6kg/cm²) for 6\\" dia borewell of best quality with mark(The PVC pipe should be got approved by departmental officers before execution. |
| 50 | Supplying and fixing of suitable PVC endcap (6kg/cm²)for 6\\"dia borewell of best quality with mark (The PVC pipe should be got approved by departmental officers before execution. |
| 51 | Supply and fixing in position of 5 HP submersible pump of best and approved quality including cost of Compressor, Motor and accessories 1 No, cost of Electric starter and main switch of approved quality charges for fixing the motor in position with necessary G.I. brackets, bolt, nuts and testing the motor etc. complete as directed by the departmental officers. |
| 52 | Supply and delivery of 3 core copper cable of 2.50 sq.m 1100V grade PVC insulated PVC sheathed water proof etc.(with excise duty) |
| 53 | Supplying of best and approved quality of HDPE pipe of the following size including laying in the bore well and tying with copper wire etc., complete complying with standard specification. |
| 54 | (a) 32 mm dia HDPE pipes. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender