Tender For Balance Works For The Supply, Erection, Commissioning And Validation Of Hvac System For Manufacturing Facility At Kerala State Homeopathic Co-Operative Pharmacy Ltd (Homco) At Pathirappally, Alappuzha
Tender Value
40 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
7 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Works For The Supply, Erection, Commissioning And Validation Of Hvac System For Manufacturing Facility At Kerala State Homeopathic Co-Operative Pharmacy Ltd (Homco) At Pathirappally, Alappuzha
BOQ
| Sl. No. | Item Description |
| 1 | Air Handling Units (AHUs) - Pre and Fine Filters for AHU's |
| 2 | Supply and installation of Prefilters – Flange type of efficiency not less than 95% (conforming to F5) for particles size down to 5 micron in Aluminium Casing. Capacity of each filter 2000 cfm. 610 x 610 x 50 (10 micron ) |
| 3 | Supply and installation of Prefilters – Flange type of efficiency not less than 95% (conforming to F5) for particles size down to 5 micron in Aluminium Casing. Capacity of each filter 2000 cfm. 610 x 305 x 50 (10 micron ) |
| 4 | Supply & Installation of Fine filters Flange type of efficiency not less than 85% to 0.3 micron (conforming to H10) in Aluminium Casing. Capacity of each filter 2000 cfm 610 x 610 x 305 (5 micron) |
| 5 | Supply & Installation of Fine filters Flange type of efficiency not less than 85% to 0.3 micron (conforming to H10) in Aluminium Casing. Capacity of each filter 2000 cfm610 x 305 x 305 (5 micron) |
| 6 | Supply & Installation of Fresh Air Filters of 10 micron particulate with an efficiency of 90% (G4 quality) 500 cfm / 1000 cfm for above AHUs subject to AHU sizing |
| 7 | Air Handling Units (AHUs) - Ventilation Units:Supply of Air Handling units with double skin construction fabricated from Al extruded section frame structure with internal coving and in non Thermal break construction, the inner skin 0.6MM thick Plain G.I & outer skin 0.6mm thick precoated GI constrution with 25 mm thick puff insulation panel, consisting of Pre filter section for fixing 10micron filter, Fan section with DIDW farward curved centrifugal fan (Kruger/Nicotra) driven by suitable TEFC squirrel cage induction motor (IE-2) CG , which should be direct driven and complete with anti vibration mounts, Inspection window, limit switch, bulk head lamp, fine filter section suitable for fixing 5 micron filters, Fresh air Louver at inlet, Inlet and outlet connections complete with service doors. |
| 8 | VAU-01 : 2500 cfm @ 60 mm WC Static Pressure (FLP) - Spirit store |
| 9 | VAU-02 :2000 cfm @ 60 mm WC Static Pressure - Bottle store |
| 10 | Pre and fine filters for VAU |
| 11 | Exhaust Unit:Supply and installation of Powder coated suction grill Ceiling Mounted with Ventilation Fan with 100% copper motor, with 4 inch flexible duct unit connecting centralized duct and exhaust outside to atmosphere. |
| 12 | Flexible 4 inch duct with accessories |
| 13 | 6 inch metal duct pipeline |
| 14 | 4 inch to 6 inch reducer type metal duct pipe T connector |
| 15 | 6 inch exhaust fan with grill |
| 16 | Ceiling Mounted with Ventilation Fan with High Efficient motor & grill frame size : 260 x 260Exhasut duct connection end Size : 4 inch |
| 17 | Supply and installation of aluminium powder coated diffuser with collar damper of following sizes |
| 18 | 525 x 525 mm |
| 19 | 450 x 450 mm |
| 20 | 300 x 300 mm |
| 21 | Supply and Installation of Aluminium powder Coated single deflection grill with collar damper for Return air riser. |
| 22 | 525 X 525 |
| 23 | 450 X 150 |
| 24 | 300 X 300 |
| 25 | Air Distribution System - Ducting (Make - Jindal) Supply and Installation of factory fabricated GI sheet metal ducting in L section as per IS 635 standards with class VIII sheet, including support, MS frame to for ducting to install in the celing & wall. |
| 26 | 24 G GI Sheet |
| 27 | 22 G GI Sheet |
| 28 | DISMANTALING OF DUCTING |
| 29 | 24 G GI Sheet |
| 30 | 22 G GI Sheet |
| 31 | Dismantling of Ducting with Insulation (Un-removed Insulation) |
| 32 | 24 G GI Sheet |
| 33 | 22 G GI Sheet |
| 34 | Duct Insulation - Installation of Duct insulation which is already avaible in the site with supplying adequate glue. |
| 35 | 13 mm thick for supply air duct |
| 36 | 9 mm thick for return air duct |
| 37 | Supply & Installation of Duct mounted GI Volume control damper suitable for supply and return ducts. |
| 38 | Supply and Instllation of 18 G GI fire dampers with Fusible Link type for fire rating of 90 minutes. |
| 39 | Differential Pressure Gauges |
| 40 | Supply & Installation of Differential Pressure gauges for AHUs & VAU across 10,5 micron filters ( 0- 250 pasl) , with mounting house |
| 41 | Supply & Installation of propellor Exhaust fan for Toilets- 400 CFM |
| 42 | Air Cooled Condensing Units - Copper piping for connecting DX - Condensing unit with AHUs. |
| 43 | 1 1 / 8\\" dia with nitrial rubber insulation |
| 44 | 7 / 8\\" dia with nitrial rubber insulation |
| 45 | DX Condensing Unit Manifolds FOR AHUs (Manifold consists of thermostate, expansion valve, extension thermostate with display, catch all drier, and shutt off valve. Digital temperature controller with sensor at return duct for controlling the DX unit) |
| 46 | For 11 TR Capacity |
| 47 | For 5 TR Capacity |
| 48 | Drain Piping - Drain piping, B Class GI drain piping complete with fittings |
| 49 | 50 NB |
| 50 | 20 NB |
| 51 | U-trap with NRV ball for AHU drain |
| 52 | 50 NB dummy Flange with Gasket & accessories |
| 53 | PUF Pipe support for 50 NB pipes , 50 mm thickness |
| 54 | Supply & Installation of M.S. Structural works for AHU starter panel |
| 55 | Testing, Commissioning, Validation and Documentation: IQ, OQ, PQ documents, Maintenance manual, Test certificate for equipment (IQ, OQ, PQ test document format need to be prepared, executed and shall be taken approval) .1) Air balancing and velocity profile test2) Pressure balancing test3) Filter integrity test4) Particle count test (3 consecutive days)5) Area recovery test6) Air Flow Pattern (Video with time and date stamp)7) Temperature & RH test |
| 56 | HEPA FILTERS IN THE AHUS. (PART - B) |
| 57 | Supply & Installation of Super flow Hepa filters Flange type of efficiency not less than 99.999% (conforming to H-14 ) for particles size down to 0.3 micron in Aluminium Steel Casing610 x 610 x 305 |
| 58 | Supply & Installation of Super flow Hepa filters Flange type of efficiency not less than 99.999% (conforming to H-14 ) for particles size down to 0.3 micron in Aluminium Steel Casing610 x 305 x 305 |
| 59 | Differential Pressure gauges for AHUs across Hepa filters ( 0- 250 pasl) - DWYER |
| 60 | ELECTRICAL WORKS - ( PART - C ) |
| 61 | Electrical Control Panels and Cabling - HVAC Equipments: Supply & Installation of self standard electrical panel consists of main incomming starter (MCCB),metering section consists of digitial voltmeter,ammeter and out going feeder for ahus, and Panel shall be totally enclosed, completely dust proof, with hinged doors, neoprene gasket and suitable locking arrangement. and push buttons,lamps,emergency stop switch, switch gears and AHU door indication etc. |
| 62 | Starter Panel (star delta ) for AHU's duly interlocked with Condensing Unit - 11 KW |
| 63 | Starter Panel (star delta ) for VAU |
| 64 | OLR for starter panel ( 13A, scheider ) |
| 65 | Electrical power ON/OFF panel for Exhaust unit , with seperate ON/OFF switch for individual exhaust fans |
| 66 | Electrical switch box for ON/OFF of exhaust fan |
| 67 | Supply and laying of armoured power cables. |
| 68 | 4C X 16 Sqmm CU Armoured cable for AHU starter panel & AHU to blower Motor |
| 69 | 4C X 16 Sqmm CU Armoured cable for DX unit |
| 70 | 4C X 10 Sqmm CU Armoured cable for DX unit & VAU |
| 71 | 4C X 6 Sqmm CU Armoured cable for Interlock between DX & Starter panel |
| 72 | 4C x 2.5 Sq.mm Copper cable (AHU to DX for thermostate control) |
| 73 | 3C X 1.5 Sqmm CU cable |
| 74 | 3C X 2.5 Sqmm CU Armoured cable for AHU |
| 75 | Earthing |
| 76 | 8 SWG GI wire with insulation |
| 77 | Earthing and it's accessories for Panels & Cable tray |
| 78 | Cable trays - Ladder type. |
| 79 | 100 Mm W X 50 mm H |
| 80 | 150 Mm W X 50 mm H |
| 81 | DOUBLE COMPRESSION GLANDS for Cable termination |
| 82 | END TERMINALS for Cables and accessories |
| 83 | Duct supports with galvonised pipe of 65 mm dia complete with top to bottom heavy plates as per site requirement and as instructed by consultant. |
| 84 | Thermohygrometer (testo) |
| 85 | Differntial pressure gauge for monitoring room differential pressure, Along with wall mounting box in wall |
| 86 | Silicon tube 8 mm for differential pressure gauge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender