Tender for TGGENCO - NSHES - Design, Manufacture, Testing at Manufactures works, Inspection, Packing, Supply and Delivery of 82.5 KVA, 415V, 3-Phase Diesel Generator set along with Automatic Main Failure(AMF) Panel board at NSHES, Nagarjunasagar.

Sharing tender

TGGENCO - NSHES - Design, Manufacture, Testing At Manufactures Works, Inspection, Packing, Supply And Delivery Of 82.5 KVA, 415V, 3-Phase Diesel Generator Set Along With Automatic Main Failure(AMF) Panel Board At NSHES, Nagarjunasagar. , DIESEL GENERATOR SET: 82.5 KVA, PF: 0.8 Lag, Voltage: 415V, 2X12V Batteries Diesel Generating Set And Water Cooled With Standard Panel (With Breaker Protection) Acoustic Enclosure And Base Frame. Cable Adaptor Box Suitable For Connecting The Cable At The Alternator, DG Safety Controller For Metering Purpose. Further, The DG Set Shall Comply With CPCB Norms I.E., CPCB IV+, Make: Mahindra Powerol/Kirloskar/ Ashok Leyland/Eicher. Standard Numbers: Generating Set: ISO 8528, Engine: ISO 8528, IS 10000, PTC 17: 1973 (Reaffirmed 2022), ISO 3046, BS 5514, BS 649 Alternator: IS13364 (Part II), IEC 34-1-1983, IEC60034-1, IS 4889/BS-269, IS 4722, IP 21, IS 4691/85, IS 7132:1973, IS 7306:1974, IS 4722:1992, IS 3043 : 1987, Automatic Voltage Regulator (AVR): IS 13364 (Part 2, IS4722 And IEC 34, Batteries: IS 1652 Acoustic Enclosure: IS 4889/BS-269, ISO 11546-1 /ASTM E 1704, ISO 8528, ISO 11546-1/ASTM E 1704, ISO 9614 (Part - 1 And 2), Base Frame: ISO 8528 /BS7698 Fuel Tank: SO 8528 /BS7698, Structural Steel/ Support: IS 2629 Acceptance Test On Assembled 82.5 KVA DG SET: ISO 8528 /BS7698. , 150 AMPS AUTO CHANGEOVER PANEL SUITABLE FOR 1 EB METER ONLY FOR 82.5 Kvastandard Numbers:Low-Voltage Switchgear And Control Gear: IEC - 60947 (Part 1 To 5), BS EN 60947-2,Low-Voltage Fuse: Supplementary Requirement For Fuses For Industrial Applications: IEC - 60947 (Part 1 To 5)Bulb Holder Power Plugs: IS/IEC 60127Electrical Relays For Power System Protection: IS-3231 (Part 0 TO 3)Switches: IS-3947 (Part -3), IEC:61058Fuse Holder: IS 2208, IS/IEC 60269, IS 13703, IS 13977MCB AC/DC: IS 2147, IS 60898,IS 2516Power Plug And Socket: IS 1293Panel Heater: IS 302-2-21(2011)Current Transformer: IS-2705 (Part 1 TO 4), IS 2026Meters (Voltmeters, Ammeters, Frequency Meter, Direct Acting Indicating Analogue Electrical Measuring Instrumentsand Their Accessories: IS-1248 (Part 1 TO 9), IEC 60051-2: 2018Hard Ware (MS Bolt, Screw And Stud, MS Nuts, MS Washers: IS 836:1987 (Reaffirmed 2019)Fire Safety Test On End Product: IEC 60695 - 2 - 1, Bus Bars:IS-5082, E913, IS 3346, Enclosure: IS 2147 1962, IS 55,IS 60034, IS-1750, IS 513, IS 1079, IS 1573,IS 2633, IS 13871Structural Steel/ Support: IS 2629, Final Assembly: IS 5, IS 101, Acceptance Test: IS 4540/IEC 146, Packing: IS 14535.