Construction Of Community Sanitary Complex Ushpul , Pyt-Katti, Block-Panchari Under Sbm-G Scheme For The Year 2026-27.
Tender Value
3 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
4 days left
EMD
6000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Sanitary Complex Ushpul , Pyt-Katti, Block-Panchari Under Sbm-G Scheme For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by Manual means over area (exceeding 30cm in depth 1.5m as well as 10m^2 on plan ) including disposal of excavated earth lead upto 50m and lift upto 1.5m.--------- neatly dressed in A.K.O.S. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: all kinds of soils |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 3 graded stone aggregate 40 mm nominal size). |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Centring and shuttering including strutting, propping etc. and removal of form. Foundation |
| 8 | Centring and shuttering including strutting, propping etc. and removal of form. Suspended Floor. |
| 9 | Centring and shuttering including strutting, propping etc. and removal of form. Suspended Floor.Edge of slab |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 11 | Half brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:1cement : 4 Coarse sand mortar. |
| 12 | 6 mm cement plaster to celing of mix 1:3 |
| 13 | 12mm cement plaster 1:6 mix inside |
| 14 | Providing and laying/fixing ceramic Glazed tiles 300X300mmmm (thickness to be specified by the manufacturers) of 1st quality conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete. |
| 15 | Distempering with dry distemper of approved brand and manufacture ( two or more coats ) and of requried shade on new work ,over and including water thinable priming coat to give an even shade. |
| 16 | Providing and fixing 1mm thick M.S steel door with frame of 40x40x6mm angle iron and 3mm gusset plates incl.all complete. |
| 17 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 18 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 19 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 20 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: 20 mm dia. nominal bore |
| 21 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: 15 mm dia. nominal bore |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 23 | Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore 122 mm long, weighing not less than99 gms. |
| 24 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 25 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia |
| 26 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diametre |
| 27 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. |
| 28 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box etc. as required |
| 29 | Providing and fixing angle iron frames for doors, windows and ventilatorsof mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 30 | Carriage of Sand . |
| 31 | Carriage of Aggregates . |
| 32 | Carriage of Bricks. |
| 33 | Cost of Citizen Information Board. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender