Tender For Installation Of 65 Kld Capacity Combined Etp Plus Stp Effluent Treatment Plant Cetp For Gamch Akhnoor.
Tender Value
1.07 Crore
Estimated cost
Bid Submission
01 Aug 2026
9 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of 65 Kld Capacity Combined Etp Plus Stp Effluent Treatment Plant Cetp For Gamch Akhnoor.
BOQ
| Sl. No. | Item Description |
| 1 | JKSR-20221.a 2.6.1 Earth work in bulk by manual means over area (Exceeding 30 cm in depth 1.5 m .Its width as well 10 SQM on plan ) including disposal of excavation earth lead up to 50 meters and lead and lifts up to 1000 meter as directed by Engineer-in-charge.1. All Kind of soil |
| 2 | 2.9.1 Earth work in bulk by manual means over area (Exceeding 30 cm in depth 1.5 m .Its width as well 10 SQM on plan ) including disposal of excavation earth lead up to 50 meters and lead and lifts up to 1000 meter as directed by Engineer-in-charge. 1. By JCB excavation |
| 3 | 15.2.1 Demolishing cement concrete manually /by mechanical means including stacking and disposal of material with 50 meters. Lead and lifts as per direction of Engineer – in – charge. 1. 1:3:6 or richer mix ( i/c equivalent – design mix) |
| 4 | 15.2.2 Demolishing cement concrete manually /by mechanical means including stacking and disposal of material with 50 meters. Lead and lifts as per direction of Engineer – in – charge.1. 1:4:8 or leaner mix ( i/c equivalent – design mix) |
| 5 | 15.3 Demolishing RCC work manually / by mechanical means including stacking and disposal steel bars and disposal of unserviceable material within 50 meters. Lead and lifts as per direction of Engineer – in – charge. |
| 6 | 15.43.1 Demolishing manually / by mechanical means including stacking and disposal steel bars and disposal of unserviceable material within 50 meters. Lead and lifts as per direction of Engineer – in – charge. 1. Water bound macadam road. |
| 7 | 15.43.2 Demolishing manually / by mechanical means including stacking and disposal steel bars and disposal of unserviceable material within 50 meters. Lead and lifts as per direction of Engineer – in – charge.1. Bituminous road |
| 8 | 4.4.6 Providing and laying in position cement concrete including curing, compaction etc. Complete in specified grade excluding the cost of centering and shuttering. All work up plinth level 1:3:6 ( 1 Cement : 3 coarse :5 graded stone 40 mm nominal size @ 220kg/ cum. |
| 9 | 5.9.1 Centering and shuttering including strutting, propping etc. & removal of form for Foundations, footings, bases of columns for mass concrete with plywood or steel sheets etc. |
| 10 | 5.9.2 Centering ad shuttering with plates /plywood or including starting propping bracing both ways with steel props wooden props and removal of formwork up to floor five level for suspended floors , roaf binding staircase balconies cantilevers sills chajjas bean plinth etc |
| 11 | 5.22A.6 Supplying and providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire). All complete up to five floor level thermo mechanically treated bars (Confirming of 456-2008) |
| 12 | 6.1.3 Brick work with mechanized autoclaved fly ash lime bricks. Confirming to IS 12894 – 2002 of class designation 100 in supervision above plinth level up to Floor level inI ) Cement mortar ( 1:6) I : Cement : 6 Aggregate sand |
| 13 | 5.2.2 Providing and laying in Position specified grade of reinforcement concrete including curing but including the cost of centering, shuttering, finishing and reinforcement 1. 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 Graded Aggregate 20 mm nominal mix |
| 14 | 5.1.4 Providing and laying in Position specified grade of reinforcement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement 1. 1:2:4 (1 Cement: 2 coarse sand: 4 Graded Aggregate20 mm nominal mix. |
| 15 | 11.11.3.2 Cement concreted flooring 1:2:4 (1: cement 2 : Coarse sand : 4 Graded stone aggregate ) Finishing with a floating coat of neat cement including cement slurry making of lines or groove etc. Complete but excluding the cost of nosing of steps etc. Complete 40 mm thick with 20 mm thick nominal size aggregate. |
| 16 | 13.9.2 Plaster (Cement plaster with a floating coat of near cement on new surface on walls in cement sand mortar 1:4 including racking of Joints etc. Complete fine finish 1. 20 mm |
| 17 | LMR Plaster (Cement plaster with a floating coat of near cement on new surface on walls in cement sand mortar 1:4 including racking of Joints etc. Complete fine finish 1. Finishing with neat cement ( Punning) |
| 18 | 12.31 Providing gola 75 x 75 mm in cement concrete 1:2:4 ( 1 Cement : 2 Coarse sand : 4 Stone aggregate 10 mm and down including finishing with cement mortar 1:3 ( 1 Cement : 3 Fine sand ) as per design |
| 19 | LMR Pipeline WorkExcavation trenches of required for pipe cable etc. including excavation for sockets and dressing of sides ramming of bottoms depth up to 1.5 mtr including taking out the excavation soil and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating wash deposited paper by ramming watering etc. and disposal of surplus excavation soil as directed with a lift and lead up to 50 meters pipes cables etc. Exceeding 80 mm dia. but not exceeding 300 mm dia.All kind of soil |
| 20 | LMR Providing and laying in position cement concrete including curing, compaction etc. Complete in specified grade excluding the cost of shuttering. CC ( 1:3:6) up to Hannah of SW pipes including 100 mm thick bed concrete as per J&K PWD specifications .*40 cm concrete width to be reduced from width wat center of pipe “O” at top of pipe ( Excluding cost of pipe) 150 mm dia SW pipe and same as per dia. 25 mm to 40 mm) |
| 21 | LMR Demolishing cement concrete manually /By mechanical means including stacking disposal of material with 50-meter Lead as per direction of Engineer –in-charge 1) 1:3:6 richer mix |
| 22 | LMR Demolishing cement concrete manually /By mechanical means including stacking disposal of material with 50-meter Lead as per direction of Engineer –in-charge 1) 1:2:4 richer mix |
| 23 | LMR Demolishing cement concrete manually /By mechanical means including stacking disposal of material with 50-meter Lead as per direction of Engineer –in-charge1) 1:4:8 leaner mix |
| 24 | 20.24.1 Construction brick masonry chamber for underground CI installation chamber and bend with common burnt clay ( non-modular) brick of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 Coarse sand ) . CI cover with frame light duty).455 x 610 mm in internal dimensions total weight of cover with frame be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). RCC top slab with 1:1:5:3 mix (1 cement :1.5 coarse sand: 3 graded stone ) aggregate 20 mm nominal size ), foundation concrete ( 1:4:8) inside plastering 12 mm thick with cement mortar (1:3) finish smooth with coat of neat cement on wall and bed concrete etc. Complete as per standard design.1) Inside dimension 455x610 mm and 45 cm deep for single pipeline |
| 25 | 20.24.2 Construction brick masonry chamber for underground CI installation chamber and bend with common burnt clay ( non-modular) brick of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 Coarse sand ) . CI cover with frame light duty).455 x 610 mm in internal dimensions total weight of cover with frame be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). RCC top slab with 1:1:5:3 mix (1 cement :1.5 coarse sand: 3 graded stone ) aggregate 20 mm nominal size ), foundation concrete ( 1:4:8) inside plastering 12 mm thick with cement mortar (1:3) finish smooth with coat of neat cement on wall and bed concrete etc. Complete as per standard design.1) 500 x700 mm and 45 cm deep for single pipeline with one or two inlets |
| 26 | 20.24.3 Construction brick masonry chamber for underground CI installation chamber and bend with common burnt clay ( non-modular) brick of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 Coarse sand ) . CI cover with frame light duty).455 x 610 mm in internal dimensions total weight of cover with frame be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). RCC top slab with 1:1:5:3 mix (1 cement :1.5 coarse sand: 3 graded stone ) aggregate 20 mm nominal size ), foundation concrete ( 1:4:8) inside plastering 12 mm thick with cement mortar (1:3) finish smooth with coat of neat cement on wall and bed concrete etc. Complete as per standard design.1) 600x850 mm and 45 cm deep for signal pipeline with three for more inlets. |
| 27 | LMR Providing and fixing PVC pipe (IS 4985) class- II, 4 kg/cm, approved quantity of prince crown logo (Make including joining the pipe with solvent cement rubber ring and lubricant Diameter 110 mm dia.1. PVC diameter 40 to 50 mm |
| 28 | LMR Providing and fixing PVC pipe (IS 4985) class- II, 4 kg/cm, approved quantity of prince crown logo (Make including joining the pipe with solvent cement rubber ring and lubricant Diameter 110 mm dia.1. PVC diameter 75 mm |
| 29 | LMR Providing and fixing PVC pipe (IS 4985) class- II, 4 kg/cm, approved quantity of prince crown logo (Make including joining the pipe with solvent cement rubber ring and lubricant Diameter 110 mm dia.1. PVC diameter 150 mm |
| 30 | 4.7.2 Providing and laying in position cement concrete including curing, compaction etc. Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level 1: 2: 4. |
| 31 | The Wastewater Treatment Plant (Combined effluent treatment plant) plant shall consist of following units, equipment’s, instruments and other allied accessories. Supply, installation, testing and commissioning of Bar Screen (SS-304 corrugated Perorated screen) inside the Bar Screen Chamber required for screening of floatable matter of sewage and effluent having max. Flow 3m3/hr with mesh size of 10mm. with suitable handling arrangement. |
| 32 | Providing & fitting of Coagulation Tank having MSFRP with 5 mm sheet thickness of side walls and 6 mm thickens of bottom. Located after the collection tank for mixing and reaction of capacity of coagulation tank is 2.2 m3 /hr (MSEP/WAVES/RUBY or Equivalent make) Chemical mixing with Gear Motor Box having 0.5 HP and Agitator. Agitator MOC- SS-304. Gear box make: Motovario/Eqv. |
| 33 | Providing & fitting of Flocculation Tank having MSFRP with 5 mm sheet thickness of side walls and 6 mm thickens of bottom. Located after the coagulation tank for sedimentation of coagulants and flocculants. Flocculation tank having capacity is 2.2 m3 /hr (MSEP/WAVES/RUBY or Equivalent make)Chemical mixing with Gear Motor Box having 0.5 HP and Agitator. Agitator MOC- SS-304. Gear box make: Motovario/Eqv. |
| 34 | Providing & fitting of Aeration Tank(MBBR Tank – I & II) having MSFRP with 5 mm sheet thickness of side walls and 6 mm thickens of bottom and located after Flocculation Tank to mix air for aerobic Biological treatment .Capacity of MBBR Tanks is (8.2 +8.2m3 ) Make:- MSEP/WAVES/RUBY or Equivalent make) |
| 35 | Providing & fitting of secondary tube settler tanks having MSFRP with 5 mm sheet thickness of side walls and 6 mm thickens of bottom and located after MBBR tanks and it is used for settlement of the MLSS .Capacity of Secondary tube settler Tanks is 2.8 m3, Make:- MSEP/WAVES/RUBY or Equivalent make) |
| 36 | Supply of MBBR media. MOC –PP , Flower type with UV stabilize , Quantity –12 m3 |
| 37 | Supply and fittings of Secondary tube settler media , MOC – PP, UV stabilized , Quantity : 8 m3 |
| 38 | Supply of Microbial culture for commission and bacterial growth aeration tank, Concentrated with Microbial stains in powder form. Make:- Aquazone/Waves/ruby45Quantity: 450 kg.Preparation with Urea – 1 bag, Jaggery – 10 kg and DAP- bag in warm water. |
| 39 | Supply, Installation, Testing and Commissioning Semi-Automatic Dual media filter of size: Diameter: 18 inches and Height: 65 inches. MOC - FRP fitted with MS supporting Frame structure. |
| 40 | Supply, Installation, Testing and Commissioning Semi-automatic Activated carbon filter of size: Diameter: 18 inches and Height: 65 inches. MOC - FRP fitted with MS supporting Frame structure. ID – 900 vales carbon used only. |
| 41 | Supply, Installation, Testing and Commissioning of Filter Feed tank. MOC - PVC, Three layer. Located after Activated carbon filter. Make: - Sintax , Vectus , Euro.Capacity: 5.0 m3. |
| 42 | Supply, Installation, Testing and Commissioning of Combined Effluent Transfer Pump (1 Working + 1 Standby). having discharge 3.0 m3/hr and head 8- 10m non clog self-primping type located after at the top slab of equalization tank to transfer raw effluent to coagulation tank. Make :- (Crompton/Kirloskar or Equivalent make) |
| 43 | Supply, Installation, Testing and Commissioning of Submersible type pumps having discharge 0.5 m3/hr and head 8- 10m non clog self-primping type located in masonry pits and chamber of various wards of hospitals building. Make :- (Lubi/Wilo/Kirloskar or Equivalent make)Quantity : 12 nos. |
| 44 | Supply, Installation, Testing and Commissioning of Air Blowers 2 Nos. (1W+1S) (Akash/Everest /Eqv.) Located near the aeration tank to supply air at the rate 110 cum/hr at a pressure of 0.45Kg/cm3 for mixing purpose. |
| 45 | Supply, Installation, Testing and Commissioning of Air Blowers Motor 2 Nos. (1W+1S) (ABB/Cromption /Eqv.) located near the aeration tank to supply air at the rate of 65m3/hr at a pressure of 0.45Kg/cm3 for mixing purpose. |
| 46 | Supply, Installation, Testing and Commissioning of Aeration Grid (WAVES/RUBY or Equivalent make) located inside collection, coagulation, Flocculation and aeration Tank for transfer. |
| 47 | Supply, Installation, Testing and Commissioning of Silicon Coarse and Fine Membrane Air Diffusers tubular silicon type (Kelvin/Reahu or equivalent make) located inside collection, coagulation, Flocculation and aeration Tank for transfer of air to Equalization, Chemical mixing and aeration tank. |
| 48 | Supply, Installation, Testing and Commissioning of Dosing Tanks (HDPE) 3Nos. located near Flocculation and Chemical reaction tank for storage of chemical solution of capacity 100 liters each.(MSEP/WAVES/RUBY or Equivalent make) |
| 49 | Supply, Installation, Testing and Commissioning of Dosing Pumps- 3 Nos. located near Chemical reaction tank for dosing chemical of capacity 0-20 LPH each.(UKL/E-Dose/Minidose or Equivalent make) |
| 50 | Supply, Installation, Testing and Commissioning of Electromagnetic Flow meter Located at inlet and outlet of plant. Flow meter should be digital type with totalizer system. (Make :- Aquazone/ Krone marshal/ Emerson make) |
| 51 | Supply, Installation, Testing and Commissioning of Filter Feed Pump (1 Working + 1 Standby) having discharge 2.0 m3/hr and head 10m centrifugal, self primping type located near to filtration system. Make :- (Crompton/Kirloskar or Equivalent make) |
| 52 | Supply, Installation, Testing and Commissioning of Centralize Electrical Control Panel. Control panel will be industrial cubical type, with non-compartment, dust and vermin proof, wall mounted. One incoming feeder will be provided which will have amp meter, voltmeter, indicating lamps and energy meter. Outgoing feeders will be as per drives of mechanical equipment. Outgoing feeder shall have contactor, overload relay, on/off push button, indicating lamp, neutral link and one set of terminal block. Panel will be epoxy coated. Job includes copper plate earthing of the panel and other electrical items. |
| 53 | Supply, Installation, Testing and Commissioning of electrical starter for all submersible pumps. Suitable for as required pump specification. |
| 54 | Providing and Fitting of Wires, Cables and Cable Trays, Earthling etc. |
| 55 | Supply, Installation and Fitting MS supporting system i.e Ladder, Supporting system with Platform railing and MS shed of Pumps and motors covers. Make: - Waves/Ruby/Eqv. |
| 56 | Supply, Installation, Testing and Commissioning of Treated water transfer Pump (2 Working + 1 Standby). Having discharge 1.0 m3/hr and head 10m centrifugal, self-primping type located near to filtration system. Make :- (Lubi/Crompton/Kirloskar or Equivalent make) |
| 57 | Supply and Installation of standby treated water tank, MOC - PVC, Three layers. Located; As per direction of End user/Engineer-in-charge. Make: – Sintex /Vectus/Euro.Capacity: 5.0 m3. |
| 58 | Supply of garden pipe. quantity : 250 meter |
| 59 | Providing and Fitting of Complete Pipes and Fittings such as tees, crosses. Plugs, sockets, elbows, reducers, supports & clamps and other allied accessories. |
| 60 | Supply, Installation, Testing and Commissioning of Sludge Disposal Pump 2 Nos Centrifugal type of discharge 0.5m3/hr and head 5m Make:- (Waha, Crompton/Kirloskar or Equivalent make) |
| 61 | Providing and Fitting of allied Accessories such as Pressure gauges, Level switches etc. as per site requirement. |
| 62 | Shed WorkFabrication of Operator Room made out of pre-fabricated PUF (poly-urethane foam) panels of size 60 mm thick fire proof panels for walls (PPGI finish on both sides) and 50/100mm thick corrugated PUF Panels for roof to make a closed structure on the outer frame 10ft X 10 ft x 10ft for CETP by way of excavation of foundation, laying of cement concrete 1:2:4 mix for foundation 1ft above the ground and 1ft below the ground. The job includes PCC Flooring in the ratio 1:2:4 and finishing it with 1:4 ratio and 2” thick. The job includes Providing and fitting of Supporting Structure/Frame to be fabricated out of square MS Pipe of appropriate size for laying of PUF panels. The roof has to be in slope. The job also includes providing and fitting of door 01 no. and window 01 no. with all accessories including electrification (providing and fitting of PVC wire, switches, socket, conduit, fan exhaust and ceiling fan, Plastic chair (02nos.) and plastic table with all accessories) and painting of the room (inside and outside). |
| 63 | Operation and Maintenance (24x7) of the plant for two year after the completion of warranty period Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender