Tender For Upgradation Of Dharamshalla Building At Wno2 Near Shiv Temple Mandlote Pyt:- Pachote Block:- Chenani Under Capex Budget Ddc For The Year 2026-27
Tender Value
3.92 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
6 days left
EMD
7840
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Dharamshalla Building At Wno2 Near Shiv Temple Mandlote Pyt:- Pachote Block:- Chenani Under Capex Budget Ddc For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earh Work in Excavation by manual labour in foundation trenches including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil. 1m from cutting edge.All kinds of soil. |
| 2 | Providing and lying in position cement concrete 1 cement:5fine sand:10 graded crushed stone aggregates 40mm size.excludingthe cost of centring and shuttering all work upto plinth Level all leads lifts and carriage complete |
| 3 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:1cement : 6 coarse sand mortar all leads lifts and carriage complete |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.1 cement: 2 coarse sand : 4 graded stone aggregates 20mm nominal size all leads lifts and carriage complete |
| 5 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete all leads lifts and carriage complete |
| 6 | Suspended Floor, Roofs ,Landing,etc |
| 7 | Edges of slab |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part I) decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of requiredsize with necessary screws |
| 9 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge :Second class Kail wood |
| 10 | Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screwsSecond class Kail wood |
| 11 | Providing and fixing brass curtain rods of wall thickness 1.25 mmwith twobrass brackets fixed with brass screws and wooden plugs etc. wherevernecessary complete. 20 mm diameter. |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. completeSize of tile 600x600 mm orient bell kajaria somany nitco varmora or eqvt |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. completeSize of tile 600x600 mm orient bell kajaria somany nitco varmora or eqvt |
| 14 | Providing and laying Ceramic glazed floor tiles 300x300 mm(thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown orient bell kajaria somany nitco varmora or eqvt |
| 15 | Providing and fixing 1st quality ceramic glazed wall tiles conformingtoIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm includingpointing in white cement mixed with pigment of matching shade complete. orient bell kajaria somany nitco varmora or eqvt |
| 16 | Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer |
| 17 | Painting steel work with deluxe multi surface paint ofrequired shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm ofapproved brand and manufacture |
| 18 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete |
| 19 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 20 | Supplying and fixing ceiling Fan of 1200mm sweep.Make Usha,Havells or eqvt (LMR) |
| 21 | Supplying and fixing exhaust Fan of 1200mm sweep.Make Usha,Havells or eqvt (LMR) |
| 22 | supplying testing and fixing LED light of 12w including connectlon complete.Make Havells,Syska or eqvt (LMR) |
| 23 | Supplying and fixing LED T5 tube light of 20W.Make Havells,Syska or eqvt (LMR) |
| 24 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid , 10 liter low level white vitreous chinaflushing cistern and CP flush bend with fittings and C.I. brackets, 40mmflush bend, overflow arrangement with specials of standard make andmosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good thewalls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid cera .somany johnson or eqvt |
| 25 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingle hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the walls whereverrequired:- White Vitreous China Wash basin size 550x400 mm with a 15 mmCP Brass single hole basin mixer cera .somany johnson or eqvt |
| 26 | Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes and fittings. cera .somany johnson or eqvt |
| 27 | Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make,weighing not less than 1.970 kg. cera .somany johnson or eqvt |
| 28 | Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved makeand shade with 6 mm thick hard board backing cera .somany johnson or eqvt |
| 29 | Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 cera .somany johnson or eqvt |
| 30 | Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fitting arrangementof approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mmwide and effective height of 88 mm, weighing not less than 190 gms cera .somany johnson or eqvt |
| 31 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36mm height of approved quality and colour, weighing not less than 300gms. |
| 32 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter |
| 33 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:20 mm dia. nominal bore |
| 34 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:15 mm dia. nominal bore |
| 35 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia. |
| 36 | Providing and fixing PTMT soap dish holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms. |
| 37 | Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete. : |
| 38 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :100mm |
| 39 | Providing and fixing aluminum die cast body tubular type universal hydraulicdoor closer (having brand logo with IS: 3564, embossed on the body, doorweight upto 35 kg and door width upto 700 mm), with necessary accessoriesand screws etc. complete |
| 40 | Providing and fixing bright finished brass hanging type floor door stopper withnecessary screws, etc. complete |
| 41 | Providing and fixing bright finished brass handles with screws etc. complete150mm |
| 42 | Providing and fixing bright finished brass handles with screws etc. complete :125mm |
| 43 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diametre |
| 44 | carriage of sand |
| 45 | carriage of agregates |
| 46 | carriage of Bricks |
| 47 | carriage of stones |
| 48 | Add cost of sign board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender