Tender For Revival And Restoration Of Hingla Devi Temple At Hangalgund Anantnag.
Tender Value
28.38 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
3 days left
EMD
56764
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival And Restoration Of Hingla Devi Temple At Hangalgund Anantnag.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means over areas (Exceeding 30cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed -All kindsof soils |
| 2 | P/L of Stone soling tightly hand Picked using Soling Stone including carriage 15km via M.T |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone Crushed aggregate 40mm nominal size) |
| 4 | Providing and laying Reinforcement cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1:1.5:3 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed Aggregate in raft ,plinth band, |
| 5 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 7 | Supplying/Fixing Reinforcment for R.C.C Work including straightening,bending to proper shapes and length as per details,supplying and bending with G20 annealed back wire and placing in position with proper blocks ,supports, chairs,spacers etc - complete upto ist floor level ISI approved Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 aggregate 20 mm nominal size) |
| 9 | Brick work with fps bricks of class designation 75 in foundation and plinth including extra for brick work in super structure above plinth level in cement mortar 1:6 mix |
| 10 | Extra for brick work above plinth level upto floor V level |
| 11 | Centering and Shuttring including Strutting ,Propping removal of formwork for Foundations, footings, bases of columns etc. for mass concrete. Complete Job |
| 12 | Centering and Shuttring including Strutting ,Propping removal of formwork- Complete Job suspended floors |
| 13 | Centering and Shuttring including Strutting ,Propping removal of formwork for Lintel, beams, plinth beams, girders, bressumers and cantilevers.Complete Job |
| 14 | Centering and Shuttring including Strutting ,Propping removal of formwork for Columns, pillars, piers, abutments, posts and struts. Complete Job |
| 15 | Providing wood work in frames of doors, windows, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( excluding hold fast lugs or with dash fasteners ): First class kail wood . |
| 16 | Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-40 mm thick including hand carving (front side) and two coats of sprit polishing |
| 17 | P/F wire guage shutters for, windows & clerestory windows including ISI marked black enameled M.S pressed butt hinges bright finished of required size with necessary screws, all complete as per direction of Engineer-in-charge.( imported wood) 30mm thick incl cost of primer and painting two or more coats,incl the cost of wire guage all complete. |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick. First Class kail wood including hand carving (front side) and two coats of sprit polishing |
| 19 | 4 mm thick glass pane (weighing not less than 10 kg/sqm |
| 20 | P/F of 40 x 4 mm flat iron hold fast 40cm long including fixing to frames with 10 mm dia bolts nuts & wooden plugs and embedding in cement concrte block 30x 10x5 cm of M10 grade |
| 21 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate |
| 22 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade includingrubbing, curing and polishing, Moulding etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 23 | 12 mm thick cement plaster on rough side of brick wall in 1:4 mix |
| 24 | Extra for making mloulding/design in cement plaster as per hindu methedology. |
| 25 | Extra for plastering done on moulding cornices or architraves including neat finish to line and level :13.27.2 In two coats |
| 26 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 27 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 28 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete.Welded |
| 29 | Providing colour coated Hi-rib GS sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks or Screws ,bolts and nuts 8mm dia with bitumin and G I limpet washers of approved brand and manufacture incl. ridges and valley .50mm thick. |
| 30 | Providing and Fixing of ornamental wooden eaves boarding 300X40mm nominal size of budloo wood including priming painting and included all fixing charges. |
| 31 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-L-Drop with lock ornamental |
| 32 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-ornamental Handles 18'' |
| 33 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-ornamental Handles 9\\" |
| 34 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-T-Bolt 6\\" |
| 35 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-Hooks |
| 36 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 37 | Engagement of JCB for Demolition of Existing temple structure including its disposal. |
| 38 | Supply and installation of a high-quality, engraved polished granite stone information board depicting the temple's history including all necessary site preparation, concrete foundation, structural support, lettering, painting, and cleanup all complete job. |
| 39 | Supply, fabrication and fixing of Brass Kalash (Temple Shikhara Kalash) of approved design and shape, made out of heavy gauge brass sheet complete with ornamental finial, polishing, welding, nuts, bolts, clamps, anchoring arrangement and all allied accessories, including transportation, erection at temple roof/shikhara and making good the damages complete in all respects as directed by the Engineer-in-Charge. |
| 40 | Carriage of sand and aggregates from an av lead of 15 Kms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender