Tender For Cement Nala Bandhara Chartha Cement Nala Bandhara Chartha_Tq.And_Dist.Chhatrapati Sambhajinagar
Tender Value
10.89 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
10 days left
EMD
10891
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Cement Nala Bandhara Chartha Cement Nala Bandhara Chartha_Tq.And_Dist.Chhatrapati Sambhajinagar
BOQ
| Sl. No. | Item Description |
| 1 | tem no 1: Excavation in all kinds of soil including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road/embenkment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. with 1 km. lead and 6 m. lift. |
| 2 | Item no.2: Excavation in hard murum including boulders upto 0.60 m diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 1 km. lead and 6 m. lift |
| 3 | Item no.3: Excavation in soft rock without blasting including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 1 km. lead and 6 m. lift. |
| 4 | Item no 4 Excavation in hard rock of all toughness by blasting including boulders above 0.60 m diameter (0.113 cum.) minimising damage to sides slope of excavation in water prism area by adopting any one or combination of line drilling/pre-spliting/smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all machinery, labour, levelling bed etc. with lead upto 15 m and lift 6 m |
| 5 | Item no.5: Providing laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed |
| 6 | Item no 6. Providing and fixing in position TMT-FE-500 bar reinforcement steel of various diameter for R. C. C. pile, caps, footing foundation, slabs, beams, columns, canopies, staircase, newels, chajjas, lintel, pardies, copings, fins, arches etc as per detailed design, drawing and schedules, Including, bending, hooking the bars, binding with wires or tack welding and supporting as required etc complete as directed |
| 7 | Item no 7. Providing and laying in situ cement concrete of grade M 150 (40 MSA) of trap/granite / gneiss/quartzite graded metal for PCC with or without surface reainforcement/RCC concreting requinng heavy of special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structurs, intake structurs, training walls, piers, abutment etc with cement concrete mixer with shuttering and scaffolding. curing with an initial lead of 1 km. and all lifts etc. completed as directed |
| 8 | Item no.8 Back filling upto ground level behind the ground level behind the canal structures etc. completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm |
| 9 | . Item no 9 Providing casing embankment using selected impervious material available directly from excavation in layers including cost of materials, machinery, labour, all other operations such as collection |
| 10 | Item no 10. Providing and constructing 230 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved sources including cost of all material, labour, |
| 11 | Item no.11: Providing and fixing canal information board of size 1.20 x0.75 m. prepared on 16 mm guage M. S. guage sheet with angleiron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromite storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/ letters/numeral/ arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m long inflate at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement in M-15 block of size 60 x 60 x 75 cm as directed |
| 12 | Insurance |
| 13 | Royalty |
| 14 | GST Tender Amount Rs.1367425/- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender