Tender For Construction Of District Drug Ware House Cum Vaccination Store At Leprosy Hospital Sarol Distt. Chamba (Sh : Construction Of Building Portion, Ws & Si, Rain Water Harvesting , Septic Tank , Site Development Work, Boundary Wall,).
Tender Value
2.89 Crore
Estimated cost
Bid Submission
25 Jul 2026
6 days left
EMD
5.78 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of District Drug Ware House Cum Vaccination Store At Leprosy Hospital Sarol Distt. Chamba (Sh : Construction Of Building Portion, Ws & Si, Rain Water Harvesting , Septic Tank , Site Development Work, Boundary Wall,).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work /cutting by mechanical means (Hydraulic excavator)/ manual means in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 2 | Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 3 | Excavation in drains and channels etcetra in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, blasting work both in soft and hard rock, chiesling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out ture to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable divertion pumping or bailing out and excavation shall be kept dry whereever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing in all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machinaries and other incidentals to complete the work as per HPPWD specification 1990 Vol.I. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 4 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetera and mass concrete including carriage of material within all leads,lifts and other incidentals as per the direction of the engineer-in -charge.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 5 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 6 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 7 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 8 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 9 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 10 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (twenty five) design mix to obtain the compressive strength of 25N/mm square ( twenty five newton per square millimetre ) for reinforced cement concrete work, in all work up to plinth level using minimum cement content not less than 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all leads ,lifts and other incedental as per specification approved drawing design and as per direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government . |
| 11 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (twenty five) design mix to obtain the compressive strenght of 25N/mm square ( twenty five newton per square millimetre ) for reinforced cement concrete work up to floor all level using minimum cement content not less than 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all lead ,lift and other incedental as per specification approved drawing design and as per direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government . |
| 12 | Providing and laying cement concrete 1:2:4 (One cement isto two sand isto four graded stone aggregate)20mm (twenty millimetre) nominal size and curing complete excluding cost of form work in foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 13 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) including curing complete excluding the cost of form work in all work up to plinth level including carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 14 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone agreegate 40 mm (forty millimetre) nominal size) including curing complete excluding the cost of form work in all work up to plinth level including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 15 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 ( One cement is to five sand is to eight graded crushed stone aggregate 40mm (forty millimetre) nominal size on ground or under water including pumping or bailing out water( surface and sub soil water), dewatering for all heights /depths and any quantum of water including removal of slush which may arise at the time of laying concrete for all heights/ depths, including the cost of form work and curing for 14 ( fourteen) days complete in Retaining walls and Breast walls etcetera as per drawings and MORD technical specification section 800, 900 and 1200 and including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 16 | Providing tor steel reinforcement of Tata / Sail of thermo mechanically treated bars of grade Fe-500 D(Fe- five hundred )or more for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 17 | Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. |
| 18 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (Viscosity grade-Ten) of approved quality using 1.7 kg/Sqm (One point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. |
| 19 | Second class brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 20 | Half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:4 (One cement isto Four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 21 | Providing and Filling with hard stone of approved quality under floor including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana Toll tax, , GST and any other taxes imposed by the Government. |
| 22 | Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone aggregate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 23 | Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:3 (one cement is to three sand) curing complete including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 24 | Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement is to five sand) curing complete including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 25 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. |
| 26 | Back filling behind abutments, return walls, wing walls and retaining walls etcetera complete as per drawings and MORD technical specification section 1200 and 1600 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 27 | Providing 100mm (Hundred millimeter) diametre PVC pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etcetera, extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards drawing face complete as per drawings and MORD technical specifications section 700 & 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 28 | Providing & Fixing complete box of cupboard of 25 mm (twenty five millimetre) thick water proof termite resistant Ply board in shutters ISI marked IS- 1659 of Uniply/Green ply/Century ply/Kit ply/Dura ply/ Marino (ISI marked) shutter and all shelves with 19 mm (nineteen millimetre) thick water proof commercial antitermite resistant ply borad including vertical portion and shelves. The back side of cupboard/cabinet work shall have 6 mm (six millimetre) thick water proof ply and all cut portion shall be finished with 6/12 mm ( six obliqe twelve milimetre) thick hard wood edging/lipping including all wood work of cupboard and the shutter from inside and out side shall be finished with 1 mm ( one millimetre) thick lamination of century/ Action tesa/Gereenlam/ Merinolam and painting in side of synthetic enamel paint of approved shade and sample etcetera complete (The measurement for payment shall be of front face only) and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality,Malkana,toll tax, GST or other taxes imposed by the Government. |
| 29 | Providing & fixing Dune RH 99 Armstrong tile of size 600x600x 16 mm (six hundred into six hundred into sixteen millimetre) of with wood wool backing and fixed with powder coated G.I frame work @ 600 mm c/c ( at the rate of six hundred millimetre centre to centre) in combination with 150 X 12 mm ( One hundred fifty into twelve millimetre) thick Rai wood as per pattern and detail design, drawing and specification and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality,Malkana,toll tax, GST or other taxes imposed by the Government. |
| 30 | Providing and fixing to existing door frames 30mm (Thirty millimetre) thick factory made Prelaminated PVC door shutter consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19x19mm (Nineteen into nineteen millimetre) for styles and 15x15mm (Fifteen into fifteen millimetre) for top & bottom rails, (Code no 9.120 ) of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm (five millimetre) thick heat moulded PVC \\"C\\" channel of size 30mm (Thirty millimetre) thickness, 70mm (Seventy millimetre) width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tappred in 45° (Forty five) degree angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetre) wide, PVC sheet out of which 75mm ( seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered in 45° (Forty five degree) on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetre) wide PVC sheet out of which 75mm (Seventy five millmetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetre) thick, 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive includingfixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into fifty into One point nine zero millimetre) size with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. |
| 31 | Providing and fixing 35 mm ( thirty five millimetre) thick ISI marked flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge .The rate is including octroi, royality, Malkana, toll tax, GST and other taxes imposed by the Government. |
| 32 | Providing and fixing 40 mm ( forty millimetre) thick 1st class Deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 33 | Providing second class deodar wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position complete including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 34 | Providing and fixing factory made WPC door frame (single rebate) made out of single piece extruded solid WPC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm ( sixty two millimetre) width and 32 mm ( thirty two millimetre) thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 x 4 mm ( thirty eight into four millimetre) and PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 35 | Providing and fixing roll formed in coral red shade in door frame cut of 1.20 mm ( one point two zero millimetre) the galvanised steel with zinc of 120 gm/Sqm ( one hundred twenty gram per square metre) powder coated with pure polyster powder up to 50-60 (fifty to sixty) micron , the size of frame 105 x 60 mm ( one hundred five into sixty millimetre) with single rebate 37 mm (thirty seven millimetre) including all taxes carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 36 | Providing and fixing window and ventilators glazed shutters with single glass fabricated from roll formed sections made of galvalnised in red coral shade with section of 46x46x0.58mm (forty six into forty six into zero point five eight millimetre), sash bars of 55x20x0.58mm (fifty five into into twenty into zero point five eight millimetre) and glass bead of 18x25x0.58mm (Eighteen into twenty five into zero pint five eight millimetre) including all carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 37 | Providing and fixing window and ventilators wire gauge shutters with fabricated from roll formed sections made of galvalnised in red coral shade with section of 40x20x0.58mm (forty six into forty six into zero point five eight millimetre millimetre), sash bars of 55x20x0.58mm (fifty five into into twenty into zero point five eight millimetre) and glass bead of 18x25x0.58mm (Eighteen into twenty five into zero pint five eight) including carriage of materials within all leads,lifts and other incidentals as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 38 | Providing & fixing 6 mm (six millimetre) thick toughened fixed window double glass of kt series with 12mm (twelve millimetre) argon gas filled (inside)clear toughened or equivalent technical values. The glass shall be without any flaws complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 39 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, ( one hundred twenty five kiligram) for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete including carriage of materials with in all leads, lifts and other incidentals as per the direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 40 | Providing and fixing 150mm (One hundred fifty millimetres) nominal size aluminium round shape Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government. |
| 41 | Providing and fixing 250x16mm (Two hundred fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 42 | Providing and fixing aluminium 150x10mm (one hundred fifty into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 43 | Providing and fixing M.S. plain grills made of M.S. square bars welded to 6mm x12mm(Six millimetre into twelve millimetre) MS flat distance between should not be more than 150mm ( one hundred fifty millimetre) centre to centre of total grill should be to windows frame with screws including all taxes and carriage of materials within all leads, lifts and other incidentals as per specification as per the direction of the Engineer-in-charge. The rate is including octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 44 | Providing and laying cheema pink Granite stone flooring in combination with dark brown granite in required patteren/round nosing & detail design all complete as per the architectural drawings with 18 mm (eighteen millimetre) thick stone slab over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete including carriage of material within all leads, lifts and other incidental as specified and as directed by the Engineer -in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 45 | Providing and laying Chima pink granite in skirting, dado and pillars over 12 mm ( twelve millimetre) thick bed of cement mortar 1:3 ( one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square metre) including grouting the joint with white cement & matching pigments etcetera complete including carriage of material within all leads, lifts and other incidental and as per direction of Engineer -in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 46 | Providing and laying full body Vitrified tiles of size 600 x 600 mm/600 x1200 mm ( six hundred into six hundred millimetre oblique six hundred into twelve hundred millimetre) of Restile/Rak/ Simpolo/Kajaria/AGL/ Johnson/Orient & Bell/ Somany/ Nitco of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana , Toll tax, GST and any other taxes imposed by the Government. |
| 47 | Providing and laying 25mm (Twenty five millimetre) thick Kota stone minimum Size 55x55cm (Fifty five into Fifty five centimetre) of uniform colour with 7.5cm (Seven point five centimetre) wide Jaisalmer yellow bend in flooring of same shade that of flooring as per detail over 20 mm ( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 48 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm ( Three hundred into three hundred millimetre) (thickness to be specified by the manufacturer), of premium quality of Restile/Rak/Simpolo/Kajaria/ AGL/Johnson/ Orient&Bell/ Somany/ Nitco as per approved shade laid on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 ( one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square metre) including pointing the joints with white cement and matching pigments etcetera, complete including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 49 | Providing & laying 300 x 300 x 25 mm ( three hundred into three hundred into twenty five millimetre) labrador design (Rainbow series) of NTC/Unistone/Atlantic in ramp over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:5 ( one cement isto five coarse sand) with joints 3 mm ( three millimetre) thick, side buttered with cement mortar 1:2 (one cement is to two stone dust) admixed with pigment to match the shade of stone and pointing with same mortar complete including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 50 | Providing and laying cement concrete interlocking block 80mm ( eighty millimetre) thick (M40) Made with vibration technology PVC / Fibre moulds pew polished of NTC/ Unistone / Atlantic ISI marked IS No 15659 as per approved shade & sample including border or kurb block grey or coloured over 50mm (fifty millimetre ) thick compected bed of coarse sand , filling with pigment to match the shade of blocks including curing rubbing & polishing complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 51 | Providing and fixing full body Vitrified tiles of size 600 x 600 mm/600 x1200 mm ( six hundred into six hundred millimetre oblique six hundred into twelve hundred millimetre) of Restile/Rak/Simpolo/ Kajaria/AGL/ Johnson/ Orient&Bell/ Somany/Nitco of approved shade and design, in dado /skriting etcetera over 12 mm ( twelve millimetre) thick bed of cement Mortar 1:3 (one cement isto three coarse sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 52 | Providing and laying Kota stone slab 25 mm (twenty five millimeter) thick in risers of steps,skirting , dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals and as per specification or as per the direction of the engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 53 | Providing and laying ceramic glazed tiles of Restile/Rak/Simpolo/Kajaria/ AGL/Johnson/ Orient&Bell/ Somany/Nitco in skirting, risers of steps and dados of size 300 x 450 mm ( three hundred into four hundred fifty millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in cladding over 12 mm (twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg/Sqm (Three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete including carriage of materials and all leads lifts and other incidentials and as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 54 | Providing and fixing 12mm (Twelve millimetre) thick Unistone /NTC/Atlantic stone cladding on Reinforced Cement Concrete / brick wall surface side as on faces of Arch masonry walls etcetera on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding upto floor all level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 55 | Providing and fixing 0.60 mm (zero point six zero millimetre ) thick prepainted steel sheel sheet of TATA Durashine /Sail steels in roofing over steel trusses with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty ) micron over 5 (five ) micron primer coating and back coat of polyster 5(five) micron or 5 (five )micron primer coating including fixing with prepainted iron J & L hooks , bolt and nuts 6 mm (six millimetre) diametre with prepainted limpet washers complete with in all accessories as required including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 56 | Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata / Sail steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6 mm (Six millimetres) diametre and prepainted G.I. limpet and bitumen washers complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 57 | Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 58 | Providing and fixing minimum 30cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.63mm (Zero decimal six three milimetres) thick plain G.I. sheet gutter of TATA/ Sail/Reliance / Jindal with iron brackets 40x3mm (Forty into Three milimetre) size dome shape grating shall be provided which shall be M.S. plate 25x5/ 6mm (Twenty five into five/six millimetre) square round shape with 6mm (Six millimetres) diametre bars in dome including bolts and nuts and washers and including making necessary connections with rain water pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 59 | Providing and fixing flashing 38cm ( thirty eight centimetre) overall with 0.60mm ( point six zero milimetre) thick prepainted sheet of Tata Durashine/Sail/Reliance/Jindal steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns ( twenty microns) over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 ( five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories including carriage of materials within all leads, lifts and other incidentals and as per specification, approved drawings, design as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 60 | Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 61 | Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetre) thick in eaves board/facia/soffits/ceiling with 19x19 mm (ninety into ninety millimetre) hollow pipe @15 cm (at the rate of fifteen centimetre centre to centre) including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 62 | Structural steel work of Tata / Sail riveted, bolted or welded in built up sections in trusses and framed work trussed purlins in building including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete in all respect as per architectural drawing including carriage of material within all leads, lifts and other incidentals as per specification as per the direction of the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 63 | Structural steel work of Tata / Sail riveted, bolted or welded in built up sections, gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana Toll tax, , GST and any other taxes imposed by the Government. |
| 64 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, ( thirty five into thirty five into five millimetre) joints mitred and welded by angle iron 35x35x5 mm ( thirty five into thirty five into five millimetre) or 35x 5 mm ( thirty five into five millimetre) flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete including carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 65 | Supplying and fixing 80x1.25 mm ( eighty into one point two five millimetre) M.S. laths with 1.25 mm ( One point two five millimetre) thick top cover rolling shutters of approved make, made of required size.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm ( twenty seven point five centimetre) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate including octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 66 | Providing and fixing ball bearing for rolling shutters complete including carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer -in-Charge. The rate including octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 67 | Providing and fixing 50mm (Fifty millimetre) diametre SST (Stainless steel) pipe of Kich handrail slip resistant in ramp at two level i.e. 75 cm 90 cm (seventy five and ninety centimeter ) height welded with 25 mm ( twenty five millimeter) diameter stainless steel flat baluster placed at 600 mm (six hundred millimeter ) centre to centre embedded in cement concrete and jointed with electrical gas welding at top alongwith handrail of stainless steel pipe of 50 mm (fifty millimeter) diameter , it should extend 30cm (thirty centimeter ) beyond top and bottom of the ramp completed as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 68 | Providing and fixing 50mm (Fifty millimetre) diametre SST (Stainless steel) pipe of Kich handrail slip resistant in stair at two level i.e. 75 cm 90 cm (seventy five and ninety centimeter ) height welded with 35 mm ( thirty five millimeter) diameter stainless steel flat baluster placed at 600 mm (six hundred millimeter ) centre to centre embedded in cement concrete and jointed with electrical gas welding at top alongwith handrail of stainless steel pipe of 50 mm (fifty millimeter) diameter , it should extend 30cm (thirty centimeter ) beyond top and bottom of the ramp completed as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 69 | Providing and fixing 150 mm (One hundred fifty millimetre) diametre on wall face unplasticised Rigid PVC (D-Plast) rain water pipes single socketed conforming to IS : 13592 Type A ISI marked of Finolex/Relpipe (Reliance)/ Vectus working pressure not less than 4.0 kg/cm2 (Four kilogram per centimetre sqaure), including jointing with seal ring conforming to IS : 5382 including jointing with seal ring leaving 10mm (Ten millimetre) gap for thermal expansion including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 70 | Providing and fixing 150mm (One hundred fifty millimetre) Plain Bend on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex/Relpipe (Reliance)/ Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 71 | Providing and fixing 150mm (One hundred fifty millimetre) Plain Shoe on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex/Supreme/Prince including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 72 | Providing and fixing 150 mm dia (one hundred fifty millimetre diametre) PVC clamps of Supreme/Finolex of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 ( fifty into fifty into fifty millimetre) mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( one cement isto four coarse sand) and making good the wall etcetera complete including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 73 | Applying priming coat on new wood and wood based surface with enamel paint of Asian paints/Nerolac paints/ Burger paints/Dulux paints give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 74 | Painting two coats ( excluding priming coat) on new wood and wood based surface with enamel paint of Asian paints/Brger paints/ Dulex paints/Nerolac paints to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 75 | Painting two or more coats (including priming coat) on new steel and other metal surfaces with enamel paint of Asian paints/Nerolac paints/ Burger paints/Dulux paints of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge . The rate is including of Malkana, Royality, Octroi, toll tax or any taxes GST imposed by the Government. |
| 76 | Providing and applying fineDune/Dune finish of NCL Alltek /Spectrum textured wall finish natural grit of Heritage having coating thickness of 1.50 mm (one point fifty millimetre) with one coat of Birla white/JK wall care putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 77 | Finishing walls with (two or more coats) with premium emulsion of Asian paints/Nerolac paints/ Burger paints/Dulux paints of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 78 | Wall painting (two or more coats) with acrylic washable emulsion of Asian paints/Nerolac paints/ Burger paints/Dulux paints of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 79 | Wall painting (two or more coats) with acrylic emulsion of Asian paints/Nerolac paints/ Burger paints/Dulux paints of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 80 | Finishing walls with apex weather proof exterior emulsion of of Asian paints/Brger paints/ Dulex paints/Nerolac paints of approved shade having VOC less than 50 gm/litre ( fifty gram per litre) and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm ( at the rate of one point four three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm ( at the rate of zero point nine zero litre per ten square metre) as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 81 | Applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 82 | Providing 6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto Three sand) upto all floor levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 83 | Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including making groove or drip course, arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5(One cement isto five sand) upto floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 84 | Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for exterior plastering including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 85 | 20mm (twenty millimetre) thick cement plaster with pattern in plaster single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:4 (one cement isto four sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 86 | Forming Groove of uniform size 15mm ( fifteen millimetre ) wide and 15mm ( fifteen millimetre) deep in the top layer of washed stone grit plaster including scaffolding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 87 | Providing plinth protection with 60 mm ( sixty millimetre) thick interlocking paver block of NTC / unistone /Atlantic with 23 cm ( twenty three centimetre) diametre half rounded RCC pipe for drainage purpose fixed over 10 cm ( ten cenetimetre) thick cement concrete 1:4:8 ( one cement isto to four course sand and eight isto stone aggregate) bedding and haunching of pipe as per architectural drawing, design and specifications complete including carriage of materials within all leads, lifts and other incidental as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 88 | Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD (P-3160-3mm) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed upto 300mm (Three hundred millimetre) vertically. The second coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millilitre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete as per drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 89 | Providing and fixing stainless steel roof Turbine ventaloatrs as per the specification laid in Architectural drawing and including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 90 | Providing and fixing of steel Warehouse Rack make with CRC Sheet Size 200 X 60 X 200 cm( two hundred isto sixty isto two hundred centimetre ) Capacity of 350 Kg ( three hundred fifty kilogram) each Layer set of one and Powder-coated finish for rust resistance & long-lasting durability and each are adjustable layers as per requirement complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 91 | Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. pipe of B.S.T. ,Tata Steel rubes , Jindal (Hassar) complete with G.I. fitting and clamps including cutting and making good the walls etcetera complete , including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government . |
| 92 | Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. pipe of B.S.T. ,Tata Steel rubes , Jindal (Hassar) complete with G.I. fitting including trenching and refilling etcetera complete , including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government . |
| 93 | Providing and fixing 1216 (20 mm OD pipe) (Twenty millimetre outer diametre) Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all specialfittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra , with clamps at 1.00 (one) metre spacing. This includes testing of joints complete for consealed work , including cutting chases and making good the wall etcetera including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 94 | Providing and fixing white vitreous china pedestal type water closet (European type of STAR S NO. 20087 (S-10) of size 57 x 35x 39 cm ( fifty seven isto thirty five isto thirty nine centimetre) with seat and lid, 10 ( ten) litres low level white PVC flushing cistern (sleek plus) with ISI marked white solid plastic seat cover and fixed with Jet pressure of Hindware/Cera including flush pipe with manually controlled device (handle lever) with all fitting and fixtures complete including cutting and making good the walls and floor wherever required. WC pan with ISI marked white solid plastic seat and lid. complete , including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 95 | Providing and fixing White vitreous China wash basin Garnet No. 10080 No. of size 55x 43 cm ( fifty five into forty three ) with pillar tap with out pedestal of Hindware/Cera/Jaquar of star white /snow white shade with a single hole with CI bracket including 15mm ( fifteen millimetre) diametre CP brass pillar tap, 32mm ( thirty two millimetre) CP brass waste of heavy duty make of ISI standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required complete , including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 96 | Providing and fixing White vitreous China wash basin Garnet No. 10010 No. of size 55x 43 cm ( fifty five into forty three centimetre) with pillar tap , with pedestal of Hindware/Cera/Jaquar of star white /snow white shade with a single hole with CI bracket including 15mm ( fifteen millimetre) diametre CP brass pillar tap, 32mm ( thirty two millimetre) CP brass waste of heavy duty make of ISI standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 97 | Providing and fixing 32 mm (thirty two millimetre ) dia P.V.C. flexible waste pipe of Supreme / Finolex / Relpipe (Reliance ) , Vectus for sink or wash basin including P.V.C. waste fittings complete. ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 98 | Providing and fixing 100 mm ( one hundred millimetre) dia CP brass grating for gully trap of heavy duty makes ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government . |
| 99 | Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror Prayag /Cera /Hindware/Jaquar of superior glass mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 100 | Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre ) glass shelf of Prayag /Hindware/Jaquar with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etc. including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 101 | Providing and fixing 110mm ( one hundred ten millimetre) diametre rigid high pressure PVC spigot and socketed soil waste and ventilating pipes of Finolex/ Relpipe(Reliance /Vectus conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 102 | Providing and fixing 75 mm ( seventy five millimetre) diametre rigid high pressure PVC spigot and socketed soil waste and ventilating pipes of Finolex/ Relpipe(Reliance /Vectus conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 103 | Providing and fixing 110x90mm (One hundred ten millimeter into ninety milimeter) ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etc.complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 104 | Providing and fixing 110mm (one hundred ten millimeter ) diametre P.V.C single equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive including ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 105 | Providing and fixing 75mm ( Seventy five millimeter ) diametre P.V.C single equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 106 | Providing and fixing 110mm ( one hundred ten millimetre ) nominal bore/diameters P.V.C. plain bend of Finolex/ Relpipe(Reliance /Vectus Confirming to IS No.-14735-99 including filling the joints with approved adhesive etcetera complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 107 | Providing and fixing 75mm (Seventy millimetre ) nominal bore/diameters P.V.C. plain bend of Finolex/ Relpipe(Reliance /Vectus Confirming to IS No.-14735-99 including filling the joints with approved adhesive etc complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 108 | Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 109 | Providing and fixing C.P. brass towel rail 600X20 mm (six hundred into twenty millimetre )of Prayag /Hindware/Jaquar complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 110 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 25mm to 40mm (Twenty five milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete ,including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 111 | Providing and fixing 15mm (Fifteen millimeters) diameters C.P. brass bib tap of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany ISI marked of approved quality (superior or heavy type) and colour of prayag polynets syonet complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 112 | Providing and fixing 15mm (fifteen millimeter) dia CP brass stop cock (concealed) of heavy duty) of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 113 | Providing and fixing 15mm ( fifteen millimetre) nominal bore ball valve (brass) of approved quality High or low pressure with plastic floats complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 114 | Providing and fixing 15mm ( fifteen millimetre) nominal bore unplasticised PVC connection pipe of Finolex/ Prince with brass union complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 115 | Providing and placing on terrace (at all floor levels) polyethylene 1000 litre (one thousand) water storage tank of Syntex/Finolex/Prince four layer with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 116 | Providing and fixing 15mm (fifteen millmeters) C.P. brass angle valve of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany without nuts and pipe ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 117 | Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 118 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten )internal dimensions, total weight of cover with frame to be not less than 38 kg(thirty eight kilogram ) (weight of cover 23 kg(twenty three kilogram) and weight of frame 15 kg (fifteen kilogram), R.C.C. top slab with 1:1.5:3 mix (one cement : one decimal five Fine sand : three graded stone aggregate 20 mm (twenty millimetre ) nominal size), foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twenty millimetre )thick with cement mortar 1:3 (one cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm(four hundred fifty five into six hundred ten millimetre) and 45 cm (forty five centimetre )deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five )complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 119 | 15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (one cement isto three sand) , including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 120 | Providing and fixing 150mm ( one hundred fifty millimetre ) nominal bore/diameters P.V.C. plain bend of Finolex/ Relpipe(Reliance /Vectus Confirming to IS No.-14735-99 including filling the joints with approved adhesive etcetera complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 121 | Providing and fixing 150mm ( one hundred fifty millimetre ) nominal bore/diameters P.V.C. door bend of Finolex/ Relpipe(Reliance /Vectus Confirming to IS No.-14735-99 including filling the joints with approved adhesive etcetra complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 122 | Providing and fixing 150mm ( one hundred fifty millimetre ) nominal bore/diameters. ISI marked PVC collar of Finolex / Relpipe (Relience) / Vectus complete upto all floor level as per HPPWD specifications including fixing with approved adhesive etcetera complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 123 | Providing and fixing 150mm ( one hundred fifty millimetre) diametre rigid high pressure PVC spigot and socketed soil waste and ventilating pipes of Finolex/ Relpipe(Reliance /Vectus conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 124 | Providing and fixing 150 mm ( one hundred fifty millimetre ) nominal bore/diameters. P.V.C cowl of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera , ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 125 | Providing and fixing 20 mm (twenty millimeters) nominal bore brass full way valve with wheel complete of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 126 | Providing and fixing 20mm (twenty millimetre) nominal bore G.I. pipe of B.S.T. ,Tata Steel rubes , Jindal (Hassar) complete with G.I. fitting including trenching and refilling etcetera complete ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 127 | Providing and fixing 15 mm (fifteen millimeters) nominal bore brass full way valve with wheel complete of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 128 | Providing and fixing of water lifting pump of 2.00 HP (two point zero horse power) of Kirloskar/Crompton including all necessary fittings complete in all respect including carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate is including of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 129 | Supplying & placing of stone aggregates 40 to 75 mm ( forty to seventy five millimetre) nominal size complete including ramming and consolidating in soak pit ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 130 | Providing 200 mm (two hundred millimetre) wide cast ridge rungs with chequred or rubber non slip surface including fixing in man hole with 200 X 200 X 100 mm (two hundred into two hundred into one hundred millimetre) cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggreegate 20 mm (twenty millimetre) nominal size, including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 131 | Supplying and fixing of cast iron medium duty 500mm dia (five hundred millimetre) cast iron cover with frame complete being not less than 58 kg. (fifty eight kilograme) including carriage of material ,including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 132 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material up to any lead & lift as per direction of Engineer-in-charge.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. |
| 133 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 including carriage of materials within all leads, lifts and other incidental and as directed by the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender