Tender For Repair To Wooden Furniture In Aor Of Ge South Delhi Cantt-10
Tender Value
34.90 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
11 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Wooden Furniture In Aor Of Ge South Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Notes for Ser No 2.00 to 16.00 :-(a) Removal of above existing unserviceable wooden/steel components of various MES FD/DB/FD/MAP furniture items or similar items carefully without disturbing the adjoining parts and supplying and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, weldings, nailing, wedging, glueing, providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by Engr-in-Charge. (b) Work will be executed where the furniture exist in different User Units location/Md Accn/Messes of GE (South) Delhi Cantt including BSO's Furniture Yard as directed by Engineer-in-Charge.(c) Timber shall be of well seasoned 1st Class Hard Wood (teak). |
| 2 | REPAIRS TO CHAIR EASY (FD - 229 & Other FD Drawings) |
| 3 | Material and labour for removing/dismantaling of damaged front legs of Chair easy and supplying and fixing new leg made of well seasoned 1st Class Hard Wood (teak), specification all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 4 | Material and labour for removing/dismantling of damaged rear legs of Chair easy and supplying and fixing new leg made of well seasoned 1st Class Hard Wood (teak), specification all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 5 | Material and labour for removing/dismantling of damaged arm-rest of Chair easy with and supplying and fixing new arm rest made of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 6 | Material and labour for removing/dismantling of damaged rail of seat and back of Chair easy and supplying and fixing of new rail or canning batten as required for seat /back of Chair Easy having holes for canning made of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 7 | Material and labour for removing unserviceable plastic cane from seat of Chair Easy , widening or proper sizing the holes for cane and recanning in Godrej pattern with 2MM wide oval shape plastic cane incl porvn of plastic cane of good quality Boarder of chair shall be canning with 3 MM wide cane. Rest all as specified and shown on drg, complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | Material and labour for removing unserviceable plastic cane from back of Chair Easy , widening or proper sizing the holes for cane and recanning in Godrej pattern with 2MM wide oval shape plastic cane incl porvn of plastic cane of good quality Boarder of chair shall be canning with 3 MM wide cane. Rest all as specified and shown on drg, complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Material and labour for tightening the frame of chair easy with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from chair easy by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-in-Charge, complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | Material and labour for PVC shoesto be provided in each legs of Chair Easy fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 11 | REPAIR TO CHAIR DINING (FD-279 and FD-228 & FD-1105) |
| 12 | Material and labour for removing/dismantaling of damaged front legs of chair dining and supplying and fixing new leg made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge |
| 13 | Material and labour for removing/dismantaling of damaged rear leg of chair dining with and supplying and fixing new leg made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge |
| 14 | Material and labour for removing/dismantaling of damaged stiffener batten of chair dining and supplying and fixing new H stiffner complete made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge |
| 15 | Material and labour for removing/dismantaling of damaged front/back /side rail of chair dining and supplying and fixing new front /back/side as required rail having holes for canning made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge |
| 16 | Supplying and fixing of medium duty SS L-bracket/corner to be provided in each legs of chair dinning as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | Material and labour for tightening the frame of chair dinning with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from chair dinning by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-in-Charge, complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | Material and labour for removing unserviceable plastic cane from Chair dinning, widening or proper sizing the holes for cane and recanning in Godrej pattern with 2MM wide oval shape plastic cane incl porvn of plastic cane of good quality Boarder of chair shall be canning with 3 MM wide cane. Rest all as specified and shown on drg, complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | Material and labour for PVC shoes to be provided in each legs of Chair dinning fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 20 | REPAIR TO CHAIR WRITING (FD - 280 and FD-202) |
| 21 | Material and labour for removing/dismantaling of damaged front legs of Chair writing and S&F new leg made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge |
| 22 | Material and labour for removing/dismantaling of damaged rear legs of Chair writing and S&F new leg made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge |
| 23 | Material and labour for removing/dismantaling of damaged arm rest of Chair writing and S&F new arm rest made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge . |
| 24 | Material and labour for removing/dismantaling of damaged H stiffener of Chair writing and S&F newH stiffner made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge |
| 25 | Material and labour for removing/dismantaling of damaged Front /back/side rail of chair writting and S&F new rail having holes for cane as required made of well seasoned 1st Class Hard Wood (teak), specification all as per drawings and as specified and directed by the Engineer-in-Charge |
| 26 | Supplying and fixing of medium duty SS L-bracket/corner to be provided in each legs of chair as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 27 | Material and labour for tightening the frame of chair writting with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from chair writing by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-in-Charge, complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | Material and labour for removing unserviceable plastic cane from Chair writing, widening or proper sizing the holes for cane and recanning in Godrej pattern with 2MM wide oval shape plastic cane incl porvn of plastic cane of good quality Boarder of chair shall be canning with 3 MM wide cane. Rest all as specified and shown on drg, complete all as specified and as directed by the Engineer-in-Charge. |
| 29 | Material and labour for PVC shoes to be provided in each legs of Chair writing fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 30 | REPAIR TO TABLE 3’ X 2’ (WITH / WITHOUT DRAWER) (FD-283,223,224) |
| 31 | Material and labour for removing/dismantaling of table top and S&F with top of 18/19mm thick P/L MDF board (exterior grade) one side teak face, ISI Marked, incl 4mm thick teak wood beading shall be provided al-round the top of table. Rest all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 32 | Material and labour for removing/dismantaling of damaged legs of Table and supply and fixing new leg of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 33 | Material and labour for removing/dismantaling of damaged front rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 34 | Material and labour for removing/dismantaling of damaged side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 35 | Material and labour for removing/dismantaling of old drawer and S&F of new table drawer with SS D handle complete all as specified in drawing or as directed by Engineer-in-Charge. |
| 36 | Material and labour for removing/dismantaling of damaged stiffener of Table and supply and fixing new H stiffener of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 37 | S&F of well seasoned 1st Class Hard Wood (teak) corner to be provided in each legs of table as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Material and labour for tightening the frame of table with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from table by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 39 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 40 | Repair to table dining 8 person (FD-1115 & FD-273 and Other FD Drawings) :- Removing the following U/S parts of tables and supply and fixing with new parts as shown agisnt each :- |
| 41 | Material and labour for removing/dismantaling of table dinning 8 person top and S&F with top of 18/19mm thick P/L MDF board (exterior grade) confirming to IS standard one side teak finish and other side white laminated duly fixed with 4mm thick beading of teak wood all around the of table. Rest all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 42 | Material and labour for removing/dismantaling of damaged long rail of table dinning 8 person and supply and fixing new long rail of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 43 | Material and labour for removing/dismantaling of damaged short rail of table dinning 8 person and supply and fixing new short rail of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 44 | Material and labour for removing/dismantaling of damaged H stiffener of table top of table dinning 8 person and supply and fixing new H stiffener of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 45 | S&F of well seasoned 1st Class Hard Wood (teak) corner to be provided in each legs of table dinning as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 46 | Material and labour for tightening the frame of table with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from table dinning by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 47 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 48 | Repair to table dining 6 person ((FD-1115 & FD-273 and Other FD Drawings)) :- Removing the following U/S parts of tables and supply and fixing with new parts as shown agisnt each :- |
| 49 | Material and labour for removing/dismantaling of table dinning 6 person top and S&F with top of 18/19mm thick P/L MDF board (exterior grade) confirming to IS standard one side teak finish and other side white laminated duly fixed with 4mm thick beading of teak wood all around the of table. Rest all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 50 | Material and labour for removing/dismantaling of damaged long rail of table dinning 6 person and supply and fixing new long rail of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 51 | Material and labour for removing/dismantaling of damaged short rail of table dinning 6 person and supply and fixing new short rail of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 52 | Material and labour for removing/dismantaling of damaged legs of Table dinning 6 person and supply and fixing new leg of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 53 | Material and labour for removing/dismantaling of damaged H stiffener of table top of table dinning 6 person and supply and fixing new H stiffener of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 54 | S&F of well seasoned 1st Class Hard Wood (teak) corner to be provided in each legs of table dinning as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 55 | Material and labour for tightening the frame of table with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from table dinning by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 56 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 57 | Repair to table dining 4 person ((FD-1115 & FD-273 and Other FD Drawings) ):- Removing the following U/S parts of tables and supply and fixing with new parts as shown agisnt each :- |
| 58 | Material and labour for removing/dismantaling of table dinning 4 person top and S&F with top of 18/19mm thick P/L MDF board (exterior grade) confirming to IS standard one side teak finish and other side white laminated duly fixed with 4mm thick beading of teak wood all around the of table. Rest all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 59 | Material and labour for removing/dismantaling of damaged long/short rail of table dinning 4 person and supply and fixing new long/short rail of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 60 | Material and labour for removing/dismantaling of damaged legs of Table dinning 4 person and supply and fixing new leg of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 61 | S&F of well seasoned 1st Class Hard Wood (teak) corner to be provided in each legs of table dinning as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 62 | Material and labour for tightening the frame of table with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from table dinning by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 63 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 64 | REPAIR TO TABLE WRITING (FD – 33,249,275) |
| 65 | Material and labour for removing/dismantaling of damaged table top and S&F with new top 18/19mm thick MDF Board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed by the Engineer-in-Charge. |
| 66 | Material and labour for removing/dismantaling of damaged drawer, box & shutter and S&F of complete box with drawer, box with shutter in complete set with SS handle and lock provision complete all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 67 | Supplying and fixing of medium duty SS L-bracket/corner to be provided in each legs of table writing as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 68 | Material and labour for tightening the frame of table with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from table writing by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 69 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 70 | REPAIR TO BED PLYWOOD TOP (FD-246 & Other FD Drawings) |
| 71 | Material and labour for removing/dismantaling of damaged plywood top of bed hard and S&F new plywood of 12 mm thick , BWP grade, ISI marked, fixed on the top of bed hard with screws. All as shown on drawing and as directed by the Engineer-in-Charge. |
| 72 | Material and labour for removing/dismantaling of damaged long rail of bed hard and S&F new log rail of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 73 | Material and labour for removing/dismentalling of unserviceable head board complete set of bed plywood top and S&F of new head board complete set with legs all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 74 | Material and labour for removing/dismentalling of damaged stiffner of bed and S&F new stiffner of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 75 | Supplying and fixing of Mild steel Flat iron corner shall be provided to legs of each bed as per sample & as directed by Engineer-in-Charge. |
| 76 | Material and labour for tightening the frame of Bed Hard with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 77 | Material and labour for hard rubber shoes to be provided in each legs of bed fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 78 | REPAIR TO TABLE CENTRE (FD-274 & 235) |
| 79 | Material and labour for removing/dismantaling of damaged table top and S&F with 18/19mm thick P/L MDF board (exterior grade) one side teak face, ISI Marked, incl 4mmthick half round teak wood beading shall be provided al-round the top of table. Rest all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 80 | Material and labour for removing/dismantaling of damaged legs of table and supply and fixing new leg of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 81 | Material and labour for removing/dismantaling of damaged rails of table and supply and fixing new rails front/side of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 82 | Material and labour for removing/dismantaling of damaged stiffener batten long/short of table centre and supply and fixing new stiffener batten of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 83 | S&F of well seasoned 1st Class Hard Wood (teak) corner to be provided in each legs of table dinning as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | Material and labour for tightening the frame of table centre with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from table center by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 85 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 86 | REPAIR TO TEA POY (FD-232 and FD-278 & 382) |
| 87 | Material and labour for removing/dismantaling of damaged table top with 18/19mm thick P/L Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed by the Engineer-in-Charge. |
| 88 | Material and labour for removing/dismantaling of damaged legs of tea poy and supply and fixing new leg of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 89 | Material and labour for removing/dismantaling of damaged rails of tea poy and supply and fixing new front/side rails of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 90 | Material and labour for removing/dismantaling of damaged H stiffener of tea poy and supply and fixing new H stiffener of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 91 | Supplying and fixing of medium duty SS L-bracket/corner to be provided in each legs of table writing as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 92 | Material and labour for tightening the frame of Teapoy wooden with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from teapoy by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 93 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 94 | Removing/dismentalling/Repair to following parts of Sofa Set 5 seater FD-1113 & FD/MAP-II/02 |
| 95 | Supply of foam cushion cover of size 530 mm X 565 mm X 100 mm thick made of cloth (not less than Rs.250/- per mtr cost of cloth) including stitching with one side Zip complete as per sample and all as directed by the Engineer-in-Charge. |
| 96 | Supply of PU foam as per specification mentioned in drawing of size 530 mm X 565 mm X 100 mm thick of 40 high density as per sample and all as directed by the Engineer-in-Charge. |
| 97 | Material and labour for removing/dismantaling of damaged arm rest of sofa set and supply and fixing new arm rest of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 98 | Material and labour for removing/dismantaling of damaged legs of sofa set and supply and fixing new legs of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 99 | Material and labour for removing/dismantaling of damaged stiffner/batten of seat and back rest of sofa set and supply and fixing new stiffner/batten of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 100 | Material and labour for removing/dismantaling of damaged front /side/ back rail sofa single seater and supply and fixing of new front /side/ back rail sofa single seater made out of well seasoned 1st Class Hard Wood (teak) of long piece of size, shape & length as per drg, all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 101 | Material and labour for removing/dismantaling of damaged front /back rail sofa three seater and supply and fixing of new front/back rail of three seater made out of well seasoned 1st Class Hard Wood (teak) of long piece of size, shape & length as per drg, all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 102 | Supplying and fixing of medium duty SS L-bracket/corner to be provided in each corner of sofa set as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 103 | Material and labour for tightening the frame of sofa set complete with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from sofa set by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 104 | Supply and fixing of PVC shoes (12 per sofa set) of sofa set to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 105 | REPAIR TO PEG TABLE (FD-384 & 277) |
| 106 | Material and labour for removing/dismantaling of damaged peg table top and S&F new top with 18/19mm thick P/L Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and as specified and directed by the Engineer-in-Charge. |
| 107 | Material and labour for removing/dismantaling of damaged legs of peg table and supply and fixing new legs of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 108 | Material and labour for removing/dismantaling of damaged rails of peg table and supply and fixing new rails of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 109 | Supplying and fixing of medium duty SS L-bracket/corner to be provided in each legs of table writing as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 110 | Material and labour for tightening the frame of Peg table with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from peg table by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 111 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 112 | Chair Dining officers:- (FD/MAP-II/04) Removing the following U/S parts of chair dinning officers and supply and fixing with new parts as shown agisnt each :- |
| 113 | Material and labour for removing/dismantaling of damaged front legs of chair dinning and supply and fixing new legs of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 114 | Material and labour for removing/dismantaling of damaged rear legs of chair dinning and supply and fixing new legs of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 115 | Material and labour for removing/dismantaling of damaged Sitting frame members/rails of chair dinning and supply and fixing new parts of sitting frame rail of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 116 | Material and labour for removing/dismantaling of damaged H stiffner complete of chair dinning and supply and fixing new H stiffner complete of required size made out of well seasoned 1st Class Hard Wood (teak), all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 117 | Material and labour for removing/dismantaling of damaged seat and S&F new seat with 12mm thick Plywood BWR grade rested on 4 corner brackets and 1 centre stiffner screwed to rails . PU foam cushion of 40 Density pasted on plywood and covered with cloth of colour approved by Engineer-in-Charge( Rate of cloth not less than Rs 300/RM). Rest complete as per Drg and as directed by Engineer-in-Charge. |
| 118 | Material and labour for repalcement of cloth only for seat and jali for under ply of seat for chair dinning officers (Rate of cloth not less than Rs 300/RM). Rest complete as per Drg and as directed by Engineer-in-Charge. |
| 119 | S&F of well seasoned 1st Class Hard Wood (teak) corner to be provided in each legs of table dinning as per approved sample, complete all as specified and as directed by the Engineer-in-Charge. |
| 120 | Material and labour for tightening the frame of chair dinning officer with SS Screws or wooden dowells and preparation of surfaces by removing of old existing fade out polish from chair dinning by scrapping or with chemical and rubbed down by emery paper including filling up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on all exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 121 | Material and labour for PVC shoes to be provided in each legs of table fixed to the legs with screw , all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 122 | Repair & recanning of chair verandah(FD-259, FD-256) |
| 123 | Material and labour for welding the chair varandha where ever required on each chair and preparation of steel surfaces and filling cavities with putty after scrapping out old painted surface by emery paper of chair Varandah and applying two coats of synthetic enamel paint complete all as specified and directed . |
| 124 | Material and labour for removing unserviceable plastic cane from chair verandah & S&F in recanning of the chair verandah with 4mm vide 1/2 Rd plastic cane good quality in Mat pattern all as specified & Directed by Engr-in-Charge. |
| 125 | Supply and fixing of PVC shoes to be provided in each leg of chair varandha fixed to the legs, all as per drawing and as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender