Tender For Special Repair To Building No. E-01 & E-02 (Otm Accn) At Harding Lines, 1163 Dsc Pl, Hq Jl Wing, The Inf School Belagavi And Provn Of Modular Kitchen In Build No P-197/01 To 197/04 At Harshan Enclave-I And Build No. P-172/01 To P-172/02 At
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
14 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Belagavi → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building No. E-01 & E-02 (Otm Accn) At Harding Lines, 1163 Dsc Pl, Hq Jl Wing, The Inf School Belagavi And Provn Of Modular Kitchen In Build No P-197/01 To 197/04 At Harshan Enclave-I And Build No. P-172/01 To P-172/02 At Virk Enclave Under Ge Belgaum
BOQ
| Sl. No. | Item Description |
| 1 | S&F 2nd class HW scantlings, clean sawn supplied and fixed, with and including dismantling existing u/s timber scantling framed work 40sq.cm and over section, in any position, complete all as specified and as directed. |
| 2 | Taking down & refixing in old or new position of 2nd class HW scantlings, clean sawn, with and including dismantling existing u/s timber scantling framed work 40sq.cm and over section, in any position, complete all as specified and as directed. |
| 3 | M&L for Preparing surface of wood and wood based materials, new or old, of any description and girth and treated with two coats of creosote oil, complete all as specified and as directed. |
| 4 | S&F Mild Steel Corrugated Galvanised Steel Sheet 0.45mm thick of class 8, grade of zinc coating 120, as in roof covering with two corrugation side laps fixed with coach screws & washers, with and including dismantling u/s AC sheet roofing and removing rubbish off the premises, complete all as specified and as directed. |
| 5 | S&F Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle, channel, hollow sections or flat sections) including distance pieces & cleats, conforming tograde Fe 410-W Gde E-250 quality 'B', complete all as specified and as directed. |
| 6 | S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; wind ties, frame work of water tanks and similar work conforming to Fe-290 Gde- E-165, with and including dismantling existing wrought iron or mild steel work of any description, complete all as specified and as directed. |
| 7 | M&L for Cement concrete roofing tiles, rustic red colour, 420mm x 330mm size of 230 kg minimum breaking strength, double groove design, as in roofing, interlocking at side joints, laid dry as in roofing, complete all as specified and as directed. Make: Model INDOGRACE of ETERNA or Equivalent make as specified here in after. |
| 8 | M&L for Cement concrete Rusted Red/Grey colour Ridge cap of size 360mmx207mm x 240mm, with and including 15mm thick in roofing bedded and jointed in cement mortar 1:6, complete all as specified and as directed. Make: Model INDOGRACE of ETERNA or Equivalent make as specified here in after. |
| 9 | M&L for Mild Steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, with and including dismantling mild steel work of any description, complete all as specified. |
| 10 | M&L for PCC type C0 [1:3:6] using 12.50mm graded stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, including demolition of old cement concrete of any type, complete all as specified and as directed. |
| 11 | S&F Aluminium Composite Pannel board of 4mm thick, comprising of a core containing not less than 70% non combustible mineral filling, sandwiched between two skins of 0.50mm thick aluminium alloy PERALUMAN-100 of weight not less than 7.6kg/Sqm, with all sub structures, anchors, hardware and all fittings, fixed over and including aluminium section of size 35x25x2mm and 1.0m x 0.30m panel with and including necessary frame work, screwing & scaffolding, fixed with screws / nails, with and including dismantling existing u/s boarding of any description, complete all as specified. Note: Measurements shall be taken as flat as fixed without any allowance for laps. |
| 12 | M&L for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 13 | M&L for False ceiling with High Pressure Steam Cured (HPSC) 4mm thick Non Asbestos Fibre Cement ceiling boards fixed with and including supply & fixing powder coated aluminium snap grid of size 605mmx605mm consisting of 25X25X1.25mm aluminium angles and TEEs of size 35x25x1.25mm with galvanised wire of required length and 2mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying three coats of white wash on ceiling surface, with and including taking down existing u/s ceiling with frame work of any description, complete all as specified and as directed. |
| 14 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 15 | M&L for 10mm thick Rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finish the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 16 | M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in two layers as 10mm thick in cement mortar 1:6 followed by 5mm thick in cement mortar 1:4 mixed with and including water proofing compound @3% of weight of cement and finish the surface even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. |
| 17 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer with and including a layer of wall care putty, complete all as specified and as directed. |
| 18 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of new plastered surfaces of any description, all as per manufacturer's instructions, complete all as specified and as directed. |
| 19 | M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss and efforescent salts, oils & greasy spots etc., and two coats of oil bound distemper over a coat of alkali resistant primer with and including a layer of wall care putty and including preparation of old surfaces of any description, complete all as specified and as directed. |
| 20 | M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss nad efforescent salts, oils & greasy spots etc., and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of old surfaces of any description, complete all as specified and as directed. |
| 21 | M&L for Machine cut Kota stone slab 18-20mm thick, as in flooring over with and including 20mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match shade of the slab, including cutting, waste, grinding, rubbing and polishing, with and including demolition of existing floor tiles of any description, complete all as specified. |
| 22 | S&F Machine cut kota stone slab 18-20mm thick, as in vertical surfaces such as skirting/dado, laid over and including 15mm thick backing coat in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing, with and including demolition of existing skirting/dado, complete all as specifed and as directed. |
| 23 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed. |
| 24 | M&L for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed. |
| 25 | M&L for Factory made 2nd class hard wood plain, framed, panelled door shutter 35mm thick, two panels with lock rail and panels of 12mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) and fitted to Chowkats, complete all as specified and as directed. |
| 26 | M&L for Factory made 2nd class hard wood Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 27 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 28 | M&L for Preparing old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 29 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed. |
| 30 | S&F MS butt hinges cold rolled medium weight 100mm size, ISI marked, complete all as specified and as directed. |
| 31 | S&F IN REPAIR Mild Steel Helical Door Spring 300mm long rat tail pattern with and including roller and roller plate, complete all as specified. |
| 32 | S&F 150mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed. |
| 33 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specified and as directed. |
| 34 | S&F Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed. |
| 35 | S&F WPC Ply board 18mm thick, one side prelam / rigidlam and other side plain, with water proof & termite proof fixed with screws & solvent cement / adhesive to make kitchen cabinet shutters & drawer, front / sides etc., with and including 1mm thick PVC lipping / beading fixed with solvent cement / adhesive over edges of WPC board of required width & colour, with and including taking down old cabinet shutters of any description, complete all specified. |
| 36 | S&F Auto closing Hinges, openable of 0-15 degree for kitchen cabinet shutters, fixed with screws, complete all as specified. |
| 37 | S&F 150mm long Stainless Steel handles, fabricated type, for kitchen cabinet shutters, fixed with screws, complete all as specified. |
| 38 | S&F Ball bearing runners 45mm telescopic channel (20 inchs) full extension, of load bearing capacity 50kgs, complete all as specified. |
| 39 | S&F Stainless Steel Wire Basket of size 380mm x 500mm x 200mm (thali basket), chromium plated, pull out type for large utensiles, with and including all necessary fixing arrangements, complete all as specified. |
| 40 | S&F Stainless Steel Wire Basket of size 536mm x 500mm x 150mm (cutlery basket), chromium plated, pull out type for large utensiles, with and including all necessary fixing arrangements, complete all as specified. |
| 41 | S&F Stainless Steel Wire Basket of size 536mm x 500mm x 200mm (plain trolley), chromium plated, pull out type for large utensiles, with and including all necessary fixing arrangements, complete all as specified. |
| 42 | S&F Stainless Steel Wire Basket of size 536mm x 500mm x 100mm (cup & saucer basket), chromium plated, pull out type for large utensiles, with and including all necessary fixing arrangements, complete all as specified. |
| 43 | S&F Stainless Steel Wall Mounted Plate Rack of Size 900mm x 1200mmx 300mm made out of 1mm thick SS sheet with and including all necessary fixing arrangements, drilling holes for screws and fixing with screws & rawal plugs etc., complete all as specified. |
| 44 | M&L for Machine cut Granite stone slab, 20mm thick, (table rubbed and polished) as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing complete and 10mm thick backing coat in CM 1:4, complete all as specified and as directed. |
| 45 | M&L for Premium quality, joint free ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exceeding 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified. |
| 46 | M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 47 | S&F IN REPAIR 15mm dia Bib tap, cast copper alloy Fancy type CP brass long body, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 48 | M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and including PVC concealed rigid conduit (minimum 20mm) medium grade, ISI marked with accessories, junction boxes, tees, terminal boxes, factory made metal flush boxes with modular top cover plates with frame for modular switches / sockets etc., including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch, including taking down old u/s point wiring of any type with fittings, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate. |
| 49 | All as per Serial Item No. 48 here-in-before but for 3 pin 5/6Amp switch socket point, on same board, complete all as specified. |
| 50 | All as per Serial Item No.48 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified. |
| 51 | All as per Serial Item No.48 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified. |
| 52 | S&F Modular switch 1 way 5/6Amp, 1 Module, 240 Volts, complete all as specified and as directed. |
| 53 | S&F Modular Socket, 5/6A, 2/3 pin combined , 2 module, 240 Volts, complete all as specified and as directed. |
| 54 | S&F Modular switch 1 way 15/16A, 1 Module, 240 Volts, complete all as specified and as directed. |
| 55 | S&F Modular Socket, 6A/16A, 2/3 pin combined multipurpose, 2 module, 240 Volts, complete all as specified and as directed. |
| 56 | S&F Modular BLDC Fan regulator, 240Volt, 120watt, electronic step type, 2 Module, for ceiling fan of any sweep, complete all as specified. |
| 57 | S&F Modular Bell push, 5Amp, 230Volt, 1 Module and S&F Ding Dong type Calling Bell, 230Volt, AC, complete all as specified. |
| 58 | S&F Ceiling rose, 3 terminals PVC/Polycarbonate, 3 phase, isolated body, complete all as specified and as directed. |
| 59 | S&F IN REPAIR Professional LED Luminaries 1x40Watt, surface mounting decorative / suspended type, aluminium extruded LED Batten with ABS end cap, 220V, AC, PC Co-extruded IP65, suitable for on grid / wall surface, with and including high efficiency LEDs minimum 120lum/watt in warm white / natural white, colour temp 3000-5700k, pre-wired and connecting up with three core flexible copper conductor, complete all as specified and directed. |
| 60 | S&F IN REPAIR LED Professional Luminaries batten type fitting 1X20watt, 220Volt, with and including high efficiency LEDs minimum 120lum/watt in warm white / natural white, PF>0.95, AC, indoor aluminium housing LED battens, integrated type batten with THD<10% with polycarbonate diffuser, with and including all accessories, pre-wired and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 61 | S&F IN REPAIR LED Building Security light fitting 35/36Watts, 230 volts, die cast aluminium housing, not less than 120lum/W, with Suitable size GI bracket made out of 32mm GI light grade pipe fixed with clamps, nuts&bolts etc., with IP 65/66 protection with driver, bracket with impact, corrosion resistant and all accessories, complete all as specified and as directed. |
| 62 | S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 230 volt, 12Way, double door, IP-42 protection with 200 Amp rated copper bus bar 230Volt, suitable for having MCB’s, complete all as specified. |
| 63 | S&F IN REPAIR Factory made epoxy powder coated Sheet metal enclosure Vertical TPN DB, 4 ways (VTPN MCB DB)with IP 43 protection, double door, sheet steel phosphetised powder painted with 200 amps rated copper busbar 415Volt, suitable for having MCCB’s/MCBs, complete all as specified and as directed. |
| 64 | S&F IN REPAIR MCCB, 3pole, 125 Amps, 415Volts, thermal magnetic, Ics=100% Icu, 16kA current rating conforming to IEC-60947-II along with spreader incl Phase Barreir to be fixed in distribution board, complete all as specified. |
| 65 | S&F IN REPAIR MCB SPN 40Amp, 10kA, 230Volt, B curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 66 | S&F IN REPAIR MCB SP 16 to 32Amp, 10kA, 230Volt, B curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 67 | M&L for Circuit / Sub main wiring with Two runs of 6.0 Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 6.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit. |
| 68 | M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 600mm X 600mm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below GL) with top edge of the plate not less than 1.5 metres below NGL, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender