Tender For Provn Of Chain Link Fence For Zpb And Tc Partapur, Interlockong Footpath At New Loc Of Ge 873 Ews And Duty Room Near Main Gate Of Ge 873 Ews Under Ge 873 Ews
Tender Value
12.47 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
7 days left
EMD
25000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Chain Link Fence For Zpb And Tc Partapur, Interlockong Footpath At New Loc Of Ge 873 Ews And Duty Room Near Main Gate Of Ge 873 Ews Under Ge 873 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches n exc 1.50 m wide and n exc 1.5 m in depth for foundation and getting out in hard/dense soil complete all as specified and directed. |
| 2 | M&L Cement concrete in foundations, filling and mass concret 1:4:8 type D2 using 40mm graded crushed stone aggregate, complete all as specified and directed. |
| 3 | M & L Reinforced cement concrete Nominal Mix type B1 1:2:4(20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 4 | Use & waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished surface complete all as specified and directed. |
| 5 | S&F TMT Bar 6mm dia and over upto 8mm dia, cut to length,bent to shape required, in stirrups complete all as specified and directed. |
| 6 | M &L for TMT steel bars 10 mm dia and Over cut to length bent to shape required, including cracking, bending spirally for hooping for columns, hooking ends and binding with and icluding mild steel wire ( annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 7 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar,set in cement mortar 1:4,type 1:3:6 (20 mm graded aggregate) complete all as specified and directed. |
| 8 | Rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | Rendering 15mm thick in CM 1:4 on other then fair faces of brick or concrete surfaces finished even and smooth without using extra cement on ceiling surfaces complete all as specified and directed. |
| 10 | M & L for P C C 1:4:8 type D 2 using 40 mm graded crushed stone aggregate as in sub base , 75mm thick complete all as specified and directed. |
| 11 | M&L Non - skid Ceramic white coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed. |
| 12 | M&L Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed in cement and sand mortar 1:3 complete all as specified and directed. |
| 13 | M&L for 75 mm cement concrete type-C2 using 1:3:6 as in plinth protection finished even and smooth , without using extra cement incl necessary form work complete, complete all as specified and directed. |
| 14 | M & L for preparation of newly plastered wall surfaces and applying three Coats of White wash on walls complete all as specified and directed. |
| 15 | M & L preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed. |
| 16 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, Fe-410-w( Gde-E-250) etc complete all as specified and directed. |
| 17 | S & F Roof trusses Fe 410W (grade-E-250)quality A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 18 | S&F Galvanised,corrugated mild steel sheeting of 0.63 mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 19 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.(camouflage pattern) complete all as specified and directed. |
| 20 | S & F 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 21 | S & F 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed complete all as specified and directed. |
| 22 | S & F PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 23 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor 75mm bore complete all as specified and directed. |
| 24 | PVC bend any radius size 75mm bore complete all as specified and directed. |
| 25 | S & F vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on existing brackets, including 32mm bore CP waste coupling, PVC waste pipe, inlet & outlet, chrimium plated PVC pipe etc, complete all as specified and directed. |
| 26 | S & F pillar taps cast copper alloy 15mm bore with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 27 | S&F 20mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed. |
| 28 | Returning filling including spreading, levelling watering and well ramming in layers not exc 25 Cm thick complete all as specified and directed. |
| 29 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 30 | S & F plain, solid, straight 2nd class hard wood chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed. |
| 31 | S & F 30mm plain, solid, straight 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 32 | S & F 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 33 | S & F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 34 | M & L Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingfor PVC Door Frame 50 x 47 mm size complete all as specified and directed. |
| 35 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2004 as applicable complete all as directed & specified |
| 36 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 37 | S&F for 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 38 | S&F for 75 mm butt hinges extruded galvanised mild steel hinge pin, anodised and fixed type ,complete all as specified and directed. |
| 39 | S&F 150 mm Aluminum anodised tower Bolts of extruded section complete all as specified and directed. |
| 40 | S&F 100 mm Aluminum anodised tower Bolts of extruded section complete all as specified and directed. |
| 41 | S&F 150 mm Aluminum Handle cast type anodised complete all as specified and directed. |
| 42 | S&F 100 mm Aluminum Handle cast type anodised complete all as specified and directed. |
| 43 | S&F 300 mm Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 44 | Supply and Installed puff water tank 500 liter capacity insulated cylindrical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed. |
| 45 | S & F 20mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 46 | S & F 75mm dia PVC SWR floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 47 | Excavation in post holes ( or similar holes) each not exceeding 0.50 cubic meter in Hard/ dense soil , getting out, retruning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a dsitance n.exc 50 mtr and making good surface complete all as specified and as directed. |
| 48 | M&L Cement concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) type B2, 1:2:4 40mm graded crushed stone aggregate complete all as specified and as directed. |
| 49 | M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in fixing of hold fasts, copings, bed plates, kerbs or mud stops, lintels upto 1.50m span, plinth courses, seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and as directed. |
| 50 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 51 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, 5 to 10 mm dia of neck, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed. |
| 52 | Supply only Chain link MS galvnised fencing , any size or type, complete all as specified and as directed. |
| 53 | Labour for Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed. |
| 54 | M&L for round bars 10mm dia ( Fe-410-W Gde.E-250) quality-A or Fe 290 (Gde E-165)and over cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire as in straightening bars for chain link fencing ( annelaed) not less than 0.9 mmd ia or securing with clips complete all as specified and as directed. |
| 55 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer including prepration of surface on new surface of steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed. |
| 56 | Surface excavation in hard/dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and ramming the bottom of excavation, getting out complete all as specified and as directed. |
| 57 | M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 58 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and as directed. |
| 59 | M&L for Point wiring complete with 1.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS-H cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS-H cable as earth continuity wire suitable for modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc for the following:- |
| 60 | One light/ exhaust fan point controlled by one way switch 5 Amps |
| 61 | One 3/5 Pin 5 Amp socket outlet point controlled by one switch on independent board. |
| 62 | One 3/5 Pin 5 Amp socket outlet on same board. |
| 63 | M&L for Point wiring complete with 2.5 Sq mm single core PVC insulated but unsheathed multistrand copper conductor FRLS-H cabeI 650/1100 Volts grade conforming to IS-694 drawn through PVC conduit (minimum 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISi marked with wall thickness not less than 1.8 mm heavy duty including conduit accessories concealed pressed steel terminal boxes of size cover white/coloured including 2.5 Sq mm PVC insulated but unsheathed copper conductor FRLS-H cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board, suitable for modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets with required modules complete all as specified and as directed. |
| 64 | Supply & fix modular switch 1 way, 6 Amps, 1 modular (ISI marked) complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 65 | Supply & fix modular switch 1 way, 16 Amps, 1 modular (ISI marked) complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 66 | Supply & fix modular socket, 6 Amps, 2/3 pin combind 2 module (ISI marked) complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 67 | Supply & fix modular socket, 6/16 Amps, 2/3 pin combind 2 module (ISI marked) complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 68 | Supply and fix modular cover plate with frame, 3 module complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 69 | Supply and fix modular cover plate with frame, 8 module complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 70 | Supply and fix modular metal flush box 3 module complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 71 | Supply and fix modular metal flush box 8 module complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 72 | S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with Two core twisted flexible copper cable of suitable size complete all as specified and directed. MAKE: HAVELLS /wipro/CG/Phillips |
| 73 | Supply & fix ceiling rose, surface bakelite, 65 x 17 mm three terminals (ISI Marked) complete all as specified and as directed. Make : Legrand / Anchor (Roma)/ L&T |
| 74 | S & F Exhaust fan of size 300 mm, steel body with louvers and connecting including provision 3 core flexible PVC insulated multi stranded copper conductor of suitable size from ceiling rose / connector to fan complete all as specified and as directed. Make: Crompton Greaves, Philips, Wipro. |
| 75 | S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.Make Havells /Legrand /L&T |
| 76 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 77 | Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 78 | Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with two core flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Crompton Greaves, Philips, Wipro. |
| 79 | M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x 5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as specified and as directed. |
| 80 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. Make: Crompton Greaves, Philips, Wipro. |
| 81 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 82 | Supply and fixing Rechargeable LED Bulb 9 W ,220 V, white color complete all as specified and as directed. Make: Crompton Greaves, Philips, Wipro. |
| 83 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed. |
| 84 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender