Tender For Drilling Of Borewell And Erection Of Submersible Motor With Starter And Accessories At Venugopal Street In Ward No.18 In Ponneri Municipality.
Tender Value
4.75 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
17 days left
EMD
4750
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Drilling Of Borewell And Erection Of Submersible Motor With Starter And Accessories At Venugopal Street In Ward No.18 In Ponneri Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Towards cost of Geophysical investigation survey charges. |
| 2 | Supply and delivery of 150mm dia of PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification ` |
| 3 | Supply and delivery of 150mm dia of PVC casing Slotted pipe ( Company Slots) including cost and conveyance at site etc., complete as per standard specification ISI make |
| 4 | Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor’s rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used).Drilling 150mm dia pilot bore to the required depth Below ground level. |
| 5 | Supply and delivery of 150mm dia(8”) PVC end cap including cost and conveyance etc., complete |
| 6 | Reaming from 150mm dia pilot bore to 300mm dia size bore as directed by the Departmental Officer, to the required depth up to 60 from Ground level |
| 7 | Labor charges for inserting the P.V.C. casing pipes assembly with slots (or) without slots in the drilled holes including joining the pipes etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Municipal Engineer excluding cost of casing pipe etc., complete 200mm dia PVC casing pipe |
| 8 | Charges for developing the bore wells with Air Compressor 600cfm (Minimum 8 hours) including transportation labor and fuel charges for Compressor as directed by the Departmental Officer and conducting yield test by “V” notch method. |
| 9 | Supply and Delivery of 4.0 Sqmm PVC insulated and Sheathed 3 Core flat type copper cable confirming to IS 694/1990 Including all charges with excise duty and handling charges etc |
| 10 | Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging 150 LPM X 60m head of water . The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % |
| 11 | Supply and delivery of 7.5 HP Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). |
| 12 | Towards Labour Charges for the errection of Submersible pump set in bore well including fixing and jointing submersible cable with proper clamps up to the starter to riser pipes to the required depth valves erection clamps, pressure gauge up to the exterior of panel board consisting of TPICN switches starter ,Volt meter, Ammeter, three pilot (indicating) Lamps capacitor single Phasing preventor,water level guard and laying and jointing the cables and twin earthing as per IE rules etc., Complete and testing the pump set and trail run for 10 days 2 HP Plat form All round |
| 13 | Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm dia Pipe clamp set |
| 14 | Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm G.I Elbow |
| 15 | Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm G.I Union |
| 16 | Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm dia Non Return valve |
| 17 | Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm Dia UPVC Pipe Column pipe (WD-M0053) |
| 18 | Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete Nylon rope |
| 19 | Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 90mm Dia PVC Pipe |
| 20 | Earth Work excavation for PVC Pipe line including cost and conveyance of materials and labour charges etc. complete as per standard. Specifications |
| 21 | Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste. |
| 22 | Refilling work for excavation earth including cost and conveyance of materials and labour charges etc. complete as per standard. Specifications |
| 23 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 24 | Hire charges for water Tank 6000 Litres Capacity including Drinking water, diesel, oil and labour charges etc., complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender