Tender For Repair / Replacement Of Path Ways, Railings, Gated Barricates, Chain Link Fence And High Security Concertina Coils Along With Boundary Walls Of installation Hamla Under Ge (Nw) Bhandup
Tender Value
45 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Path Ways, Railings, Gated Barricates, Chain Link Fence And High Security Concertina Coils Along With Boundary Walls Of installation Hamla Under Ge (Nw) Bhandup
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors/ paving not exceeding 15cm thick below or above GL unreinforced complete all as specified and directed. |
| 2 | M & L for PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) 100 mm thick for sub base / floor and finished with even and fair / rough as per ground requirement complete all as specified and directed. |
| 3 | M & L for 75mm thick cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregates as in floor / sub base and finished even and fair complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 5 | M & L cement concrete tile 30cm x 30cm x 20-25 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 20mm thick in CM (1:4), complete all as specified and directed. |
| 6 | M & L for sand filling 50 mm under floors or in foundations including watering and consolidation as required complete all as specified and directed. |
| 7 | M & L for Machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS 15658- 2006 of 60 mm thick M-35 grade with grey cement and pigment with glossy finish complete all as specified and directed. |
| 8 | Demolition of brickwork built in cement mortar including all quoins, cornices, concrete coping etc on brick work complete all as specified and directed. |
| 9 | M & L for brickwork in sub class 'B' Bricks old size, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:4) complete all as specified and directed. |
| 10 | M & L for brickwork with sub class \\"B\\" bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 11 | M & L for precast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in solid block masonry exceeding 100 mm width and built in CM (1:4) complete all as specified and directed. |
| 12 | M & L for walling or random rubble, uncoursed well bonded, bedded and solidly, hearted built in CM (1:6) etc complete all as specified and directed. |
| 13 | All as per item No. 12 above but except stones including removal of mortar, cleaning with water etc complete all as specified and as directed by the engineer-in-charge.Note: Old stone obtained under item above shall be re-used under the subject items. |
| 14 | Taking down cement or cement lime plaster of any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 15 | Material and Labour for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces and finished with 5 mm thick plaster, both coats to be mixed with water proofing compound @ 2% by weight of cement or as per manufacturers instructions complete all as specified & directed. Note:- Supply only water proofing compound shall be measured and paid separately. |
| 16 | M & L for two coats of cement base paint over one coat of primer on new surface of wall including preparation of surface complete all as specified and directed. |
| 17 | M & L for one coat of cement base paint on old surface of wall including preparation of surface complete all as specified and directed. |
| 18 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 19 | M & L for RCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like slab etc complete all as specified and directed. |
| 20 | M & L for RCC (1:2:4) type B-1 (using 20mm graded aggregate) for cover slab MH including necessary form work and set in cement mortar (1:4) complete all as specified and directed. |
| 21 | M & L for form work to sides & soffit of roof beams / top beams rough finished surface of concrete complete all as specified and directed. |
| 22 | Supply and fixing TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking bending, spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips confirmed to Fe 410-0 complete all as specified and directed. |
| 23 | Supply and fixing TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking bending, spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips confirmed to Fe 410-0 complete all as specified and directed. |
| 24 | Demolition and breaking up 150 mm drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including bed concrete and removal of debris including sludge if any outside MD land complete all as specified and directed. |
| 25 | Demolition and breaking up 200 mm drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including bed concrete and removal of debris including sludge if any outside MD land complete all as specified and directed. |
| 26 | Exavating in trenches in Hard / dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc not exceeding 10 sqm on plan not exceeding 1.5 m depth and getting out complete all as specified and directed. |
| 27 | Exavating in trenches in Hard / dense soil not exceeding 1.5 m wide and not exceeding 3 m in depth, for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc not exceeding 10 sqm on plan not exceeding 1.5 m depth and getting out complete all as specified and directed |
| 28 | M & L for cement concrete (1:4:8) type D-2, using 40 mm graded stone aggregate as in foundation complete all as specified and directed. |
| 29 | M & L reinforced concrete pipes class NP2 200 mm laid and jointed complete with collar complete all as specified and directed. |
| 30 | M & L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in bed to drain pipes 200 mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 31 | M & L for salt glazed stone ware drain pipes of 150 mm internal dia laid in trenches and jointed in CM (1:1) complete all as specified and directed. |
| 32 | M & L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in bed to drain pipes 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 33 | Returning, filling in, including spreading, levelling, watering and well raming in layer not exceeding 25 cm complete all as specified and directed. |
| 34 | Removing exavated material outside MD land exceeding 1.50 km but not exceeding 5 km and depositing where directed complete all as specified and directed. |
| 35 | Dismantling of posts or struts (wood, steel or RCC) any section including taking out embeded portion and making good distrubed ground on concrete, brick work, masonry etc and removing of demolished materials outside MD land complete all as specified and directed. |
| 36 | M & L for PCC (1:2:4) type B1 (20mm graded aggrgate) as in coping, lintel bands, hold fast, string courses, water troughs and the like etc including weatheing, slightly rounded or chamfered angles, throating, necessary form work complete all as specified and directed. |
| 37 | Dismantling of fencing wire mesh any type and size complete all as specified and directed. |
| 38 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface in hard / dense soil complete all as specified and directed. |
| 39 | M & L for cement concrete ( 1:3:6) type C-2 (using 40mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed. |
| 40 | S & F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in posts and struts in fencing, framed work such as grills, gratings, etc. including all necessary cutting and welding etc and for similar work complete all as specified and directed. |
| 41 | S & F mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square nut, not exceeding 5 cm long and diameter of neck 5 to 10mm complete all as specified and directed. |
| 42 | M & L for PVC coated chain link fencing, size not exceeding 40 mm x 40 mm. The dia of GI wire shall be 2.5 mm to 3 mm and thickness of PVC shall be 1 mm to 1.5 mm fixed to the posts complete all as specified and directed. |
| 43 | M & L for cutting into existing man holes for connecting new drains of 150 mm dia pipe and making good two pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 and finished and reforming benching as required complete all as specified and directed. |
| 44 | M & L for cutting into existing man holes for connecting new drain of 200 mm dia pipe and making good two pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 and finished and reforming benching as required complete all as specified and directed. |
| 45 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 46 | Destilting / desludging completely area drain not exceeding 30 cm wide of any description including removing and refixing of cover slab & making good if any with same specification and removing of silt / sludge outside MD land complete all as specified and directed. |
| 47 | All as per item No. 46 above but for upto 450mm wide drain. |
| 48 | All as per item No. 46 above but for upto 600mm wide drain. |
| 49 | M & L for Mild framed works such as angles, tees, channels, etc as in fenching posts large and small gates and grills, gratings and chain link fenching etc, including hanging gates in pillar with proper pintle hinges, stops, hand made sliding bolts etc complete all as specified and directed. |
| 50 | S & F in repairs of Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and fixing to any of standard rails straining bolts, includig securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. |
| 51 | M & L for restraining & resecuring of Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and fixing to any of standard rails straining bolts, includig securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. |
| 52 | S & F razer type concenrtina coil, 9SWG hot galvanised spring tensile wire 145 to 150 newton per square mm, zinc coating 250-300 gram per sqm, dia of coil when unstretched 610 mm minmum no of coils 10 per RM after laying hot dip galvanised razer ribbon tape of size 0.50 mm thick 19 mm wide before wrapping of central corewire fixed with 1.66 mm thick GI clips 25 nos per running meter and special nut bolts, hold 'z' coil together and extrra two rows parrel wire of 10 gauge complete all as specified and directed by the EIC and including dismantling of razer type concertina coil with two parallel rows of wire and removing the debris outside MD land complete all as specified and directed by Engineer - in - charge. |
| 53 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 54 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 55 | S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, post or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde-E-250) quality - B including distance pieces, cleats plate etc including required welding as per relevent IS complete all as specified and directed. |
| 56 | S & F rolled mild steel work in plates (plain or chequered) channels, square cut or notched (ordinary and countersunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B, complete all as specified and directed. |
| 57 | M & L for preparation of new steel surfaces of any description, over 10cm in width or grith, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 58 | M & L for preparation of old decorated steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 59 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 60 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 61 | S & F in repairs 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed. |
| 62 | S & F in repairs 1000 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed. |
| 63 | S & F in repairs steel rolling shutters 1.25mm thick lath, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 64 | M & L for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 65 | M & L for Ball bearing for rolling shutters complete all as specified and directed. |
| 66 | Taking up or down steel tubing 15 mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed. |
| 67 | M & L for tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia complete all as specified and directed. |
| 68 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 25 mm complete all as specified and directed. |
| 69 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors of nominal outer diameter of pipes 25 mm complete all as specified and directed. |
| 70 | M & L for preparation of new concrete surfaces, and applying two coats of synthetic enamel paint over one coat of primer etc complete all as specified and directed. |
| 71 | M & L for preparation of old concrete surfaces, and applying one coat of synthetic enamel paint, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender