Tender For Provn Of 05 (Five) Guard Rooms And Connected Services Along The Perimeter Of Mamun Mil Stn
Tender Value
1.75 Crore
Estimated cost
Bid Submission
22 Aug 2026
13 days left
EMD
2.50 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 05 (Five) Guard Rooms And Connected Services Along The Perimeter Of Mamun Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Constructions of Guard Room including toilet (05 Nos) complete all as specified and shown on drawings. |
| 2 | Lumpsum price worked out by the contractor for SITE CLEARANCE AND EARTH WORKS as listed in Schedule 'A' Part-II. |
| 3 | Lumpsum price worked out by the contractor for PLUMBING WORKS as listed in Schedule 'A' Part-III. |
| 4 | Lumpsum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IV. |
| 5 | Lumpsum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-V. |
| 6 | Lumpsum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-VI. |
| 7 | Lumpsum price worked out by the contractor for ROAD, PATH AND CULVERT WORKS as listed in Schedule 'A' Part-VII. |
| 8 | Lumpsum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-VIII. |
| 9 | EXTERNAL WATER SUPPLYM&L for cutting to existing GI fitting 25/40 mm dia (existing pipe) for addn/altn, branch connection and inserting T, complete all as specified and as directed. |
| 10 | SEWAGE DISPOSALS&F of Factory made man hole cover, full floor, medium duty weight, square/Rectangular (size 600x900mm thickness not less than 75mm) set in CM 1:6 as in manhole cover slabs with fair faces, complete all as specified and as directed. |
| 11 | S&F at site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc, complete all as specified and as directed. |
| 12 | M&L for construction of soakage wells of size 1.80M dia X 3.0 M effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes RCC/DWC, complete all as specified and directed. |
| 13 | INTERNAL ELECTRIFICATIONS&F of stepped type electronic mini/deluxe fan regulator, 100 watt, rotary step, complete all as specified and directed. |
| 14 | S&F of LED Lamp of 9W, Base B22, BEE 3 Star complete all as specified and directed. |
| 15 | S&F of LED tube light fittings (4 feet long), wall mounted 1x20 watt 6500K, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. |
| 16 | S&F of LED light fitting, mirror type with high output diffuser, 2 feet, 10 watt, 220 volt, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 17 | S&F of building security LED light luminaire 30 W, IP 66, IK-07, AC 230 volts, made up of pressure di-cast iron housing complete making connection using PVC insulated and sheathed 3 core multi-stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including MS bracket made of 25/32mm GI pipe bent to shape, fixed to wall with clamps and nuts & bolts for mounting fittings, complete all as specified and directed. |
| 18 | S&F of sheet metal enclosure, single pole and neutral 240 volt, 20 to 32 Amps with two pin and earth plug and socket plug top complete with single pole MCB, complete all as specified and directed. |
| 19 | S&F of MCB single pole and neutral, 40/63 Amps, 240 volts, B-series, complete all as specified and directed. |
| 20 | Earthing complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres below ground level) with top edge of earth plate not less than 1.5 metres below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be M-10 (1:3:6), type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4, type B-1 using 20 mm graded stone aggregate reinforced with XPM JALLI, pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1 (2009) as specified including provision of 15mm dia light grade GI pipe for earth wire protection and 20 mm dia for watering complete, all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion, complete all as specified and as directed. |
| 21 | S&F of 5 star rated BLDC (Brush less direct current motor) ceiling fan 230 volts, single phase of 1400mm sweep double ball bearing type with minimum air delivery 245 CMM & service value shall not be less than 6.0 B.E.E (five star rated) including blade, down rod and canopy cover including fan regulator of suitable size (modular) etc and including connecting with 3 core flexible copper conductor cable of size 0.50 sqmm and including writing of MES No with black synthetic enamel paint, complete all as specified and as directed. |
| 22 | S&F of exhaust fan of heavy duty of 300 mm sweep, double ball bearing copper wounded, metallic body, AC single phase 230 Volts, having 1200 + 50RPM capacity and power consumption not more than 50 watt with minimum air delivery 700 CMH including box type square shaped metallic louvers made out of powder coated CRCA sheet of thickness not less than 01 mm alongwith aluminium flaps and fixed by grouting bolts with nuts and cutting into existing brick/stone masonry wall and provision of PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for making proper suitable size of hole to match with size of exhaust fan for proper ventilation including MS bolts 04 Nos for fixing exhaust fan, complete all as specified and as directed. Note: (i) Rates are deemed to be included to making the cutting hole smoothly and colour wash as per existing colour specifications. (ii) Rates are deemed to be including charges of hiring T & P, i.e. ladder, square folding and insurance of labour deployed because holes are made to be at multi-storage bldgs of different height. Therefore, contractor shall be fully responsible to take all requisite necessary precautions with regard to safety of the worker. No claims whatsoever shall be entertained on this account at the belated stage. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender