Tender for Tender for Construction Of Surge Control Tower At Duni Barrage And Construction Of Boundary Wall Of Duni Nirikshan Bhawan.
Tender Value
1.25 Crore
Estimated cost
Bid Submission
30 Jul 2026
9 days left
EMD
2.51 Lakhs
Bank guarantee accepted
Document Fee
2715
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pilibhit → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Surge Control Tower At Duni Barrage And Construction Of Boundary Wall Of Duni Nirikshan Bhawan.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in Excavation of foundation in dry soil i/c 1.5m lift and lead upto 30m i/c all cost of labour, material and T&P etc. complete. |
| 2 | Cement Concrete 1:3:6 Cement , Sand and Aggregate i/c all cost of labour, material and T&P etc. complete. |
| 3 | Reinforced Cement Concrete M20(1:1.5:3) Cement , Sand and Aggregate i/c all cost of labour, material and T&P etc. complete. |
| 4 | Reinforcement including Bending, binding, cutting and placing of reinforcement including cost of binding wire but excluding cost of steel. i/c all cost of labour, material and T&P etc. complete. |
| 5 | Centering & shuttering for R.C.C./R.B. work including cost of centering & shuttering up to 3.0 m. height.c all cost of labour, material and T&P etc. complete. |
| 6 | Ist Class Brick Work in 1:4 Cement Mortar i/c all cost of labour, material and T&P etc. complete. |
| 7 | DPC 2.5 Cm thick and cement concrete consisting of 1 part cement and 1½ parts approved coarse sand and & parts approved 13 mm (½\\") graded stone grit and including water proofing materials as ordred by the Engineer-in-Charge in the proportion as specified by the manufacturers.per i/c all cost of labour, material and T&P etc. complete. |
| 8 | Plastering upto 3m height with 1:4 Cement Mortar i/c all cost of labour, material and T&P etc. complete. |
| 9 | Plastering above 3m height with 1:4 Cement Mortar i/c all cost of labour, material and T&P etc. complete. |
| 10 | Ceiling Plaster with 1:4 Cement Mortar i/c all cost of labour, material and T&P etc. complete. |
| 11 | Providing and applying waterproof white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth omplete. In Internal and External Area and ceilling including all material , labour and T&P etc Complete |
| 12 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :13.41.1 New work(two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sqm) |
| 14 | Supplying & fixing 6mm (1/4'') China white glazed in flooring or skirtting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all material, labour and T&P etc. required for proper completion of the work |
| 15 | Laying 25mm thick Kota stone of size 45x45cm and above flooring over priviously prepared base within 2 cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shed of floor as per direction e/i including cutting polishing with wax polish supply of all material, labour and T&P etc. required for proper completion of the work |
| 16 | Supplying & fixing doable patam choukhet M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Door / windows & Staircase grill. |
| 17 | Supplying & fixing angle iron for door& window with ISA 35X35X4, T 35X35X5 fly proof wire gauze to windows, clerestory windows & doors with M.S. flat !5x3 mm and nuts and bolts complete with stainless steel (grade 304) wire gauze of 0.5mm dia. Wire and 1.4 mm aperture on both sides and 10 mm sq bar grill with fabrication and all complet material including wire mesh & Pane Glass including all material labour T&P etc. |
| 18 | Supplying & fixing of flush doors commercial quality confirming to IS:2202 Part I (1983)including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts lock handles spring fittings with screws etc. |
| 19 | Providing and laying brick coba 12 mm thick laid with M 150 class brick bat coba 7.5 mm thick with gap of 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proffing coumpound spreding cement slurry mixed with aerelic cement concrete water profing coumpound filled gaps of coba and top of coba mortar mixed with water proffing coumpound in 1:4 cement and course sand mortar finished with smoothed and top square marks 30cmx30cm and side wall parapet shall monoltythic plaster wall upto 30 cm height junction and corner shall be rounded by brick ballast cement and course sand masonary and coba brick top finished plaster mixed with acitic water proofing compound with 2% by weight including all material labour T&P etc complete |
| 20 | Providing and laying of factory made 80 mm thick Interlocking cement concrete tiles (30MPa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/ laying of Interlocking tiles levelling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T&P etc. required for proper completion of work as directed by Engineer-in-Charge. |
| 21 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 22 | Supply and fixing of 10 cm dia PVC pipe (Kisan, supreme or equivalant) 6 kg/sqcm pressure complete with PVC Bends, Elbow, Tee, Union, Gratings etc all fittings and including jointing of pipes, supply of necessary M.S damps 2.5cm x3mm fixed to wall's, 15 cm long, 6mm dia nails all materials, labour and T & P etc Required for completion of the work and also incuding repair of plaster, pointing etc, If damaged during fixing of the pipe as per direction of Engineer-In-Charge. |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes |
| 26 | Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) :25 mm nominal bore |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. |
| 28 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 29 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 30 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 31 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 32 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm |
| 33 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 34 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 35 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to 1S:8931. 15 mm nominal bore |
| 36 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 37 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter |
| 38 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 39 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 40 | Providing and fixing toilet paper holder : C.P. brass |
| 41 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 42 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 43 | Boring/drilling bore well of 300 mm dia for casing/ strainer pipe, by suitable method prescribed in 1S: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil |
| 44 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size |
| 45 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 46 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia |
| 47 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 48 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. For SPN industrial type, socket |
| 49 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire . For 15 amp socket |
| 50 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 51 | Supplying and fixing 3 pin 5/6 A modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 52 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)12 way (4 + 36), Double door |
| 53 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,\\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 54 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amp |
| 55 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 56 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 57 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 58 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 59 | Supplying, Installation, Testing and Commissioning of ISI Marked openwell submersible pump set contain with stainless steel shaft and cast iron/SS body, the pump shall be designed to prevent over loading and having dynamically balanced rotating parts etc. the pump capable of delivering following capacities discharge at suitable head and lowering the pumps in water bodies and suitable for operation on 415V(+- 10%), 3-phase AC supply including providing required no's of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet including connection, interconnection ,supports etc. as required. suitable for 900LPM at 25 Mtrs Head etc. complete as required. |
| 60 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 61 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: |
| 62 | Supplying, Installation, Testing and Commissioning of Air Cooled Cassette type Air conditioners & inverter complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A/R-407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, 50 Hz ,1 /3 phase AC supply, including surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU), copper power and control cable upto 5.5 Mtr (IDU to ODU) including drain 244 DELHI CHEDULE OF RATES (E&M)-2025 pipe, the system shall be capable of performing cooling, dehumidification, Air circulation, filteration & ventilation of following capacity with Scroll/rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB) as specified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per International Electrotechnical Commission (IEC) 17025 standards/Central Power Research Institute (CPRI)/ Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification and as per IS: 1391 as required. Inverter Type-1.5 TR with 5 Star BEE Rating |
| 63 | Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable)8.11.4 40 watt Each 837 |
| 64 | Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required. |
| 65 | Supplying and fixing steel tabular pole 7 Meter long designated 410 SP 3 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect with LED street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt Confirming to IP 66 protectont |
| 66 | LED Smart Street light fixture, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt) 120 watt |
| 67 | Providing and fixing chromium plated brass curtain rod of 25mm dia having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete |
| 68 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 69 | Supply and installation of concrete Pannel Boundary wall upto 2.10 M Hight from G.L.(Prestressed concrete of grade M-25 with 4 Nos of 4mm STS wire) slab of size 2100mm*300*50mm with fixing of same at proper position between two pillers/column with same grade of concrete (pre stressed with 7 Nos of STS wire) of size 2740mm*150mm*150mm with provision of edge grove (50mm*50mm) two opposite phase for holding precast slab/Pannel including footing 450mm*450mm*600mm with grade M-20 and base concrete 450mm* 450mm*200mm & 550mm*550mm*100mm grade M-10 also including all material Labour. T & P etc. carriage at site complete with contractor profit |
| 70 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sqm) |
| 71 | Providing and fixing 1 mm. thick M.S. sheet garrage door with frame of 40x40 x6 mm (1½ x 1½ x ¼\\") angle iron, 3.15 mm 1/8\\" thick M.S.usset plates at the junctions and corners, including supply and fixing of necessary fittings. lock rail of 37.5cm length of oxidised iron and including pintels, hooks at the top and applying a priming coat of red lead paint on all sides complete. |
| 72 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 73 | Reinforced Cement Concrete 1:2:4 Cement , Sand and Aggregate with 2% of Steel i/c all cost of labour, material and T&P etc. complete. |
| 74 | Centering & shuttering for R.C.C./R.B. work including cost of centering & shuttering up to 3.0 m. height.c all cost of labour, material and T&P etc. complete. |
| 75 | Supplying & fixing sign board size 0.60x0.90 m made by angle iron 35x35x5 mm with steel of 18 SWG with bracing of 25x5 mm flat iron including excavation of pit 30x30x45 cm and fixing in C.C. 1:2:4 with painting and writing letters as per direction of Eng-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender