Tender For General-Esewa Kiosk At Gram Nyayalaya Nedumkandam-Cabin-General Civil Work
Tender Value
72298
Estimated cost
Bid Submission
25 Jul 2026
6 days left
EMD
1807
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Esewa Kiosk At Gram Nyayalaya Nedumkandam-Cabin-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Cabin work |
| 2 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 4 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides |
| 5 | OD4332/2025-2026:Providing and fixing Pre-laminated high density fibre board, with both sides decorativelamination other side balancing lamination Grade-I (exterior grade) in cabin/shelves withscrews and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mmthick of approved brand (fittings to be paid separately).Pre-laminated with decorativelamination both side exterior Grade-I HDF Board 18mm thick confirming to IS:14587(portablecomputer table cum cabins). |
| 6 | OD4341/2025-2026:Providing and fixing auto- concealed hydraulic soft closing hinges 116x60 mm etc... complete |
| 7 | OD4342/2025-2026:Providing and fixing powder coated telescopic drawer channels 450mm long with necessaryscrews etc... complete as per the direction of Engineer in charge |
| 8 | 9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. |
| 9 | 9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm |
| 10 | 9.81.2:Providing and fixing bright finished brass handles with screws etc. complete:100 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender