Tender For Development Of Park Madan Lal Khurana Khel Parisar(Sports), Synthetic Track In Ramesh Nagar Ward No 91/Kbz(Ac-25)
Tender Value
2.92 Crore
Estimated cost
Bid Submission
03 Aug 2026
2 days left
EMD
5.90 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Park Madan Lal Khurana Khel Parisar(Sports), Synthetic Track In Ramesh Nagar Ward No 91/Kbz(Ac-25)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Jul-2026 | CORRIGENDUM-I | Other | 03-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | DEVELOPMENT OF PARK MADAN LAL KHURANA KHEL PARISAR(SPORTS), SYNTHETIC TRACK IN RAMESH NAGAR WARD NO 91/KBZ(AC-25) |
| 2 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re- olling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil .Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. |
| 4 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :250 mm dia. R.C.C. pipe |
| 5 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame completeas per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 7 | Providing & laying in position cement concrete of specified grade excluding the cost of centering & shuttering-All work upto plinth level: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Zone-III |
| 8 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 9 | Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 10 | 8 LAYER ACRYLIC FLOORING SYSTEM: Providing and laying 8-layer acrylic flooring Techno Court system as per specifications mentioned below: (a) P/applying 1 layer Primer and 2 layers of resurfacer. (b) P/laying 3 layers of cushion. (c) P/applying 2 layers of color coats as per specifications. (d) All game lines marking to be done as per international standards. ITF approved |
| 11 | PROVIDING AND LAYING SBR AND EPDM MIX RUBBER FLOORING OF 36MM THICKNESS OVER WELL LAYED CEMENT CONCRETE SURFACE AT SITE IN DESIGNS AND PATTERNS AS PER THE DIRECTIONS OF OFFICER IN CHARGE OF THE SITE USING GOOD QUALITY OF BINDER OR ADHESIVE . (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 12 | Fixed type Aluminium Pickleball pole made of 80mm x 80mm square pipe with special internal ratchet system for tightening the net. This enables perfect tension control for the net. Top cover made from Cast Aluminium with pulley. To Use of Branded Epoxy paint (MRF) |
| 13 | Badminton pole and net fixed type Technical Specifications1. Quantity-1 Set = 2 Poles + 1 Net2. Pole SpecificationsMaterial: Heavy-duty MS pipe, hot-dip galvanized., Outside Diameter: 76 mm (minimum) ,Wall Thickness: 3.2 mm minimum, Height from playing surface: 1.55 mFinish: White/Green weather-resistant powder coating or synthetic enamel paint over zinc primer.Top fitted with pulley and tensioning mechanism.3. FoundationRemovable ground sockets made of heavy-duty galvanized MS., Concrete foundation: Grade: M20, Size: 300 × 300 × 450 mm minimum each.,Including excavation, concreting, backfilling and finishing.4. Badminton NetMaterial: Knotless braided polyethylene/HDPE.Mesh Size: 20 mm × 20 mm Net Length: 6.10 m Net Width (Depth): 760 mm Colour: Dark brown or black. Top reinforced with 75 mm white PVC/canvas tape. Steel wire rope 4–5 mm dia, PVC coated, complete with tensioning arrangement.5. AccessoriesNet tensioning device. Galvanized pulley system. Stainless steel nuts, bolts and washers. End caps. Ground sockets with covers. Complete fixing hardware.6. InstallationProper alignment and vertical installation of poles. Net tightened uniformly to official playing height. Testing for stability and safe operation.7. FinishAll MS components hot-dip galvanized. Weather-resistant powder coating or synthetic enamel finish. Rust-proof and suitable for outdoor installation.8. Warranty : Minimum 1 year against manufacturing defects.Measurement :Unit: Per Set (2 poles, 1 net, sockets, concrete foundations, installation and all accessories complete). |
| 14 | Volley Ball Pole Fixed Type Made of 3” x 4” Mild Steel pipe height adjustable with inside special ratchet system for tightening the net. This enables perfect tension control for the net. Use of branded MRF Epoxy paint. |
| 15 | Supply, Installation, Testing & Commissioning of Football Goal Post (1 Set) – FIFA StandardItem Description:Supply, installation, testing and commissioning of one complete set (2 Nos.) of full-size football goal posts conforming to FIFA Laws of the Game and relevant international standards, complete with nets, net supports, foundation sockets, anchoring system, excavation, concreting, painting, and all accessories required for proper installation and commissioning. Technical Specifications1. Quantity 1 Set = 2 Goal Posts2. Goal Dimensions (Inside Clear Dimensions) Width: 7.32 m (24 ft)Height: 2.44 m (8 ft) 3. Material: Goal posts and crossbar fabricated from heavy-duty hot-dip galvanized MS tube or extruded aluminium section. Minimum wall thickness-MS: 3 mm,Aluminium: 2.5–3 mm Corrosion-resistant construction. 4. Goal Post Profile : Round: Ø100–120 mm OR Oval/Elliptical profile: 100 × 120 mm,Smooth edges with no sharp projections. 5. Finish: Hot-dip galvanized after fabrication (minimum 80 microns zinc coating) where MS is used. Finished with weather-resistant white polyester powder coating or polyurethane paint.6. Net UV stabilized HDPE braided net. Mesh Size: 100 mm × 100 mm Twine Thickness: 4 mm minimum Colour: White. Complete with nylon hooks/clips.7. Net Support Galvanized steel or aluminium rear support frame. Net top depth: 0.9–1.0 m Net bottom depth: 2.0–2.5 m8. Foundation : Heavy-duty galvanized ground sockets. Concrete foundation:Grade: M20 Approx. size: 450 × 450 × 600 mm deep (or as recommended by manufacturer). Including excavation, PCC (if required), concreting, backfilling and finishing.9. Anchoring Ground anchors/net pegs and all fixing hardware. Stainless steel nuts, bolts and washers.10. Colour White (FIFA standard appearance).12. Installation Complete erection in line and level. Proper alignment on playing field. Testing for rigidity, stability and safety.13. Warranty Minimum 1 year against manufacturing defects. |
| 16 | Supplying and Fixing Cricket cage for net practise. Technical Specifications1. Quantity 1 No. Cricket Practice Cage2. Overall Size- Length: 30.00 m (100 ft), Width: 3.66 m (12 ft),Height: 3.66 m (12 ft)3. Cricket Net Material: UV Stabilized Knotless HDPE Net. Twine Thickness: 2.5–3.0 mm Mesh Size: 45 mm × 45 mm Colour: Green or Black. Net fixed on both sides, top and rear end of the cage.4. Net Fixing Stainless steel hooks, GI wire rope and nylon cable ties.Galvanized eye bolts and tensioning arrangement.Net securely fixed to avoid sagging.5. Entrance One hinged entrance opening approximately 1.2 m wide × 2.1 m high. Complete with latch arrangement.6. AccessoriesFoundation bolts.End caps.SS nuts, bolts and washers.Net hooks.Wire ropes.Cable ties.All hardware required for complete installation.7. Installation Complete erection, alignment, verticality check and tightening of the net.Testing for stability and safety.Ready for use after installation.8. Warranty Minimum 1-year warranty against manufacturing defects. |
| 17 | Supplying and Installation of Synthetic Cricket turf including laying Jointing and fixing the same on the concrete as per the specification of Cricket practice pitch. |
| 18 | Container Based Store Room: Supply, designing, fabrication and installation of store room using container of size (LxBxH) 20’0”x8’0” X 8’6”. Structure shall be made in MS pipes of size 50 X 25 X 2mm (at 04 walls and false ceiling of the container) with provision of nut-bolts / fastners. The flooring shall be made using ceramic tiles of reputed brand having size 1' X 1'. Walls shall be made using MDF Board leak proof/water proof of 6mm thickness and having adequate provision for thermal insulation, door wardrobe, PVC office curtain & 2 window for air ventilation. Door shall be made using GI Sheet on the outside and MDF Board on the inside having size 7'x3'. Addition to this, 1 PVC door shall be provided in the toilet of size 8'x5'. Toilet shall hae 1 nos. toilet pots (EWC) with all sanitary and CP fittings with tap, towel ring, paper holder including all plumbing works with GI/PVC in each unit and good quality mirror. The office block shall also have necessary arrangements of lighting such as lights, 6 nos. 6 watt conceal spot light, 2 nos. 15 watt LED Tube Lights, 4 Power sockets 16 Amp., AC power Socket 32 Amp., 1 nos., 3 nos. Exhaust fans, 2 nos. small cealing fan and 2 nos. water proof bulkhead wall spot light for outside. The container(s) should be placed in the balanced manner & should be properly grouted in the ground. All the metal parts shall be duly painted using good quality of paint.(As per direction of the officer-in charge) |
| 19 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 20 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 21 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 22 | Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. |
| 23 | Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 24 | Hamelia patens of height 90-105 cm. bushy in big size HDPE bag |
| 25 | Ficus Nuda Topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 cm to 210 cm ht in 40 cm Cement Pot/ Plastic pot. |
| 26 | Bismarckia Palm 115 cm to 180 cm ht. plant, well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot/ Plastic pot. |
| 27 | Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. |
| 28 | Dracaena ‘Song of India’ specimen plant (three in one), having ht. 60 cm & above, well developed, fresh and healthy with good foliage in 25 cm size of Earthen pot / Plastic pot. |
| 29 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stackedvolume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)Holes 90 cm dia, and 90 cm deep Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender