Tender For Replacement Of 150 Mm Ac Pipeline With 200 Mm D.I. Pipeline From Costa Ground To Gujarathi Samaj And Surrounding Areas In Margao Constituency.
Tender Value
1.88 Crore
Estimated cost
Bid Submission
04 Aug 2026
5 days left
EMD
3.76 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of 150 Mm Ac Pipeline With 200 Mm D.I. Pipeline From Costa Ground To Gujarathi Samaj And Surrounding Areas In Margao Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting the bituminous road for laying the pipeline in trenches including labour, tools, etc. and disposing the excavated excess material from the trench to a distance of 1000 metres, including making level the trench surface by utilising the serviceable material to the level of the top surface of road, by compacting, watering ramming with rolling with road roller after completion of laying of pipe and refilling the trenches etc. complete as per the direction of engineer in charge.>By Manual Means :>Rural Roads |
| 2 | Earthwork in excavation by mechanical means (hydraulic excavator) in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) incl. dressing of sides & ramming of bottom for all lead and lift including setting out the excavated soil and disposal of surplus soil with all lead including providing barricading danger lighting guarding as directed by departmental officer in all types strata comprising any of the materials such as soil, silt sand clay gravel moorum of all conglomerated laterite rock, soft rock fissured shattered decomposed rock or weathered rock and all such other materials as described under Appendix A to these specification either in fullor in parts as the casemay be adopting any approved method of methods as may be convenient or permitted inclusive of chiselling, wedging etc blasting probhibited in all conglomerates as directed by the Engineer in charge etc complete. |
| 3 | Supplying at store or site of work including railway freight carting loading and unloading stacking etc. Centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .>Nominal Diameter in mm>100 |
| 4 | Supplying at store or site of work including railway freight carting loading and unloading stacking etc. Centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .>Nominal Diameter in mm>200 |
| 5 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Double Socket Reducer>Nominal Diameter in mm>200x150 |
| 6 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Double Socket Tee with Branch Flange>Nominal Diameter in mm>200x80 |
| 7 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Double Socket Tee with Branch Flange>Nominal Diameter in mm>200x100 |
| 8 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Double Socket Tee with Branch Flange>Nominal Diameter in mm>200x150 |
| 9 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Flanged Socket>Nominal Diameter in mm>100 |
| 10 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Flanged Socket>Nominal Diameter in mm>150 |
| 11 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Flanged Socket>Nominal Diameter in mm>200 |
| 12 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Double socket branch flange Invert tee (Scour valve)>Nominal Diameter in mm>200x150 |
| 13 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Double Socket Bend 45 Degree>Nominal Diameter in mm>200 |
| 14 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Double Socket Bend 22.5 Degree>Nominal Diameter in mm>200g |
| 15 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.>Double Socket Bend 11.25 Degree>Nominal Diameter in mm>200 |
| 16 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.>Mechanical Compression Collar Coupling>Nominal Dia in mm>100 |
| 17 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.>Mechanical Compression Collar Coupling>Nominal Dia in mm>150 |
| 18 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.>Mechanical Compression Collar Coupling>Nominal Dia in mm>200 |
| 19 | Manufacturing and supplying at the site of work ER welded MS pipes including procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form pipe welding on automatic machine and forming v edge on both ends of pipes including hydraulic pressure test conforming to IS : 3589- 2001 grade Fe 410 in double random length of 10 to 12.2 metres in bevelled ends including freight loading & unloading mechanical crane & stacking at site etc. complete.>Size in ( OD ) in MM for 10mm thickness>219.1 |
| 20 | Providing and laying three coat of anticorrosive and anti-toxic surface coating for MS pipeline. The paint shall be applied after removing the scales and rust over the pipe by wire brush. Paint shall be applied uniformly to achieve uniform coating of average DFT of 60 microns per coat with the brush. 2nd coat shall be applied over the 1st coat after 8 hrs. the process shall be repeated for the 3rd coat. DFT for the final coat shall be 35 microns . Final surface shall be uniform and shall have total thickness of about 150 microns . The rate is inclusive of material transportation up to the site of work including labour machinery as required etc. complete . All three coats shall be of distinctive colour as approved be Engineer-in- charge. |
| 21 | Providing and applying primer coat or of fibres coal tar and solvent based rubber modified bituminous primer of density 0.92 gm/cu. cm. and viscosity of 1000-2000 cps @ 150 gms/Sqm followed by seven layers ( 4 mm thick ) of polythene polymerised bitumen ester of local 7 layers pipe coat 4 mm should conform to requirement of IS :10221 and AWWA C-203 for prefabricated tapes including Cost of material for coating and wrapping handling charges preparation of pipe surface all labour machinery etc. complete. |
| 22 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete>With 10 mm -12 mm thick plate>Tees bends reducers |
| 23 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete>With 10 mm -12 mm thick plate>M.S.spigot tail piece suitable for connectiong M.S pipeline with C.I./D.I pipeline |
| 24 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846-2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400/15 500/7 or equivalent grade as per IS 3896 part 2-1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163-89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A)>Nominal Diameter in mm>100 |
| 25 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846-2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400/15 500/7 or equivalent grade as per IS 3896 part 2-1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163-89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A)>Nominal Diameter in mm>150 |
| 26 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846-2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400/15 500/7 or equivalent grade as per IS 3896 part 2-1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163-89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A)>Nominal Diameter in mm>200 |
| 27 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Tamper proof double acting air valve conforming to AWWA C-512 with tamper proof air vents and SS:304 floats with isolating sluice valve confirming to IS:14846 flanges drilled as per IS:1538PN 1.6(Class A)>Dia in mm>50 |
| 28 | Conveying carefully from stack at site 250m from both sides rolling and lowering in trenches laying and jointing true to line and level and perfect linking of joints>Cast iron or Ductile iron or A.C. or S & S or flanged & PVC pipes. |
| 29 | Conveying carefully from stack at site 250m from both sides rolling and lowering in trenches laying and jointing true to line and level and perfect linking of joints>S&S flanged/plain ended specials |
| 30 | Conveying carefully from stack at site 250m from both sides rolling and lowering in trenches laying and jointing true to line and level and perfect linking of joints including tack welding for mild steel pipes for water supply pipeline complete in all respects as per the direction of the engineer in-charge>Nominal diameter in mm>200 |
| 31 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) SBR type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket oil soft soap and hydraulic testing of jointing as per IS:3144-1985>Nominal diamter in mm.>100 |
| 32 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) SBR type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket oil soft soap and hydraulic testing of jointing as per IS:3144-1985>Nominal diamter in mm.>150 |
| 33 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) SBR type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket oil soft soap and hydraulic testing of jointing as per IS:3144-1985>Nominal diamter in mm.>200 |
| 34 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.>Double socketed specials such as bends collar couplings etc>Nominal Diameter in mm>100 |
| 35 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.>Double socketed specials such as bends collar couplings etc>Nominal Diameter in mm>150 |
| 36 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.>Double socketed specials such as bends collar couplings etc>Nominal Diameter in mm>200 |
| 37 | Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and boltsas directed by the engineer in-charge.>Nominal diamter in mm.>80 |
| 38 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I>Nominal diamter in mm.>100 |
| 39 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I>Nominal diamter in mm.>150 |
| 40 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I>Nominal diamter in mm.>200 |
| 41 | Fixing C.I. Double orifice / Kinetic type air valve of following sizes with bronze ferrule at inlet screwed on isolating valve small orifice elastic ball resting valve small orifice elastic ball resting on small bronze orifice nipple and large orifice vulcanite ball resting on moulded seat ring inlet faced and drilled to BST \\"D\\"\\" suitable to working pressure of 10 kg/sq. cm.>Nominal diamter in mm.>50\\" |
| 42 | Construction of masonry chamber 90 x 90 x100 cm inside in 40kg/sq. cm laterite masonary in neatly dressed stones complete with 23 cms wall thickness and in cement mortar 1:4 ( 1 cement : 4 coarse sand) for sluice valve of sizes 100 mm 120 mm 150 mm and 200mm dia with necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation cost of surface cover and all other materials and labour and as per details below)>with M.S. sheet cover with 12mm thick M.S. plate and frame of Angle iron 5050x6mm in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size) |
| 43 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer- in -charge>Dia in mm>100 |
| 44 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer- in -charge>Dia in mm>200 |
| 45 | Centering & shuttering including Strutting Propping & removal of forms for :>Foundations Footings Bases for columns |
| 46 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering shuttering and finishing :>All works upto plinth level |
| 47 | Refilling the pipeline/foundation trenches plinth sides foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 48 | Repairs and reinstatement to the road for trenches made by laying water supply pipeline, by removing the refilled material in the trench for the total depth of 0.40m and making good the road surface by providing laying rolling by road roller compacting for laterite soling 30cm thick, two layer of full grout of 50mm thick each as per specifications mentioned in item no 14086 of road GSR, complete as per the direction of the engineer in charge. Rural road |
| 49 | Supplying of ASTM UPVC pipe conforming to ASTM 1785 with ISO 14001 etc. complete.>SCH-80(Blue)/(white)>Outer Dia in mm>25 |
| 50 | Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete .>Coupler>Outer Dia in mm>25 |
| 51 | Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete .>Elbow 90 Degree>Outer Dia in mm>25 |
| 52 | Supplying cast iron saddle pieces of the following sizes including bolts nuts rubber packing suitable for giving service connection for AC / PVC pipeline of various classes.>Dia in mm>100 |
| 53 | Supplying cast iron saddle pieces of the following sizes including bolts nuts rubber packing suitable for giving service connection for AC / PVC pipeline of various classes.>Dia in mm>200 |
| 54 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :>20 mm nominal bore |
| 55 | Making connection to individual 15mm /20mm/25mm G.I/ OD Blue PVC pipeline with existing distribution line of any diameter with saddle piece / and necessary pipe and specials required suitable to the distribution line with road cutting trenching refilling the same including the cost of labour and accessories etc. complete. as per the direction of engineer -in- charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender