Tender For Supply & Installation Of New P.V.C. Overhead Tank Capacity Of 1000 Liters Their Pipe Lines & Other Miscellaneous Civil Work For So Type Quarters At R Ur Mppmcl, Jabalpur.
Tender Value
7.52 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
13 days left
EMD
7550
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply & Installation Of New P.V.C. Overhead Tank Capacity Of 1000 Liters Their Pipe Lines & Other Miscellaneous Civil Work For So Type Quarters At R Ur Mppmcl, Jabalpur.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Polyethylene water storage tank |
| 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge.External Work 20 mm nominal outer dia Pipes. |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineerin-Charge.Concealed work including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes. |
| 4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge.External Work 25 mm nominal outer dia Pipes. |
| 5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge.External Work 40 mm nominal outer dia Pipes. |
| 6 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long.Weighing not less than 198 gms. |
| 7 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Providing and fixing brass bib cock of approved quality Brass bib cock 20 mm nominal bore (36x4=144 Nos) |
| 9 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore (36x2=72) |
| 10 | Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. and weighing not less than 650gm, 15 mm nominal bore 125 mm long foam flow. |
| 11 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore (36x2=72) |
| 12 | Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperatalyUnplasticised PVC pipe Below ground |
| 13 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia |
| 14 | Providing and fixing of PTMT stop cock, including all labour as per the direction of engineer incharge. |
| 15 | Providing and fixing of tank connection including all labour as per the direction of engineer incharge. |
| 16 | Providing and fixing of P.V.C flushing cistern of approved brand, capacity of 10 ltr. Including flushing pipe & required all fittings labour all complete as per directed of engineer incharge. |
| 17 | Providing & fixing best quality white colour orrisa pan WC seat of parryware or approved equivalent make, Ist quality ISI marked complete with cost of all materials like 'P' trap, pvc elbow and labour. Item also includes dismantling old WC seat and fittings and repairing the floor to original condition all as per the direction of Engineer-in-Charge and cost of all material, labour etc. required for repair work. (Base rate 3200.00 Each.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender