Tender For Special Repair To Roof Treatment Of Ors Line And Bath Room ( Bldg No. P-52) And Special Repair To Security Wall With Barbed Wire/Concertina Coil ( Appx 200 M Long) In The Aor Of Age B/R-Ii Under Ge Kapurthala
Tender Value
47.88 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
18 days left
EMD
95760
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Roof Treatment Of Ors Line And Bath Room ( Bldg No. P-52) And Special Repair To Security Wall With Barbed Wire/Concertina Coil ( Appx 200 M Long) In The Aor Of Age B/R-Ii Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repair to roof treatment of OR's line and bath room ( Bldg No. P-52) and special repair to security wall with barbed wire/concertina coil ( Appx 200 m long) in the AoR of AGE B/R-II under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of wrought/MS work in any description all as specified. |
| 3 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed. |
| 4 | Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of fdn and plinth beams and similar wk vertical or to batter for rough finished surfaces. |
| 5 | Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete. |
| 6 | Form work to sides and soffits of floor, plinth beam or roof beams, beam haunching, lintel etc rough finished surfaces of concrete flats. |
| 7 | M&L for RCC M-25 design mix as in foundation, including raft, fooling fdn beams, plinth beams bases for columns and mass concrete. |
| 8 | M&L for RCC M-25 design mix as in lintel beam, roof beam, cantilivers, bressummers, lintel over 1.5m span all as specified and directed. |
| 9 | M&L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc; concrete all as specified and directed. |
| 10 | M&L for TMT bars (Fe 500), 5mm dia and over upto including 10mm dia stirrups bending spirally or hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and directed. |
| 11 | M&L for brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed. |
| 12 | M&L for preparation of newly plastered or unplastered wall surface and applying two coats of cement based paint over a coat of cement primer including preparation of surfaces, complete all as specified and as directed. |
| 13 | M&L for applying two coats of synthetic enamel paint on preparation of newly steel surfaces over a coat of zinc chromate primer any description over 10 cm width of girth not otherwise described complete all as specified and directed. |
| 14 | M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc; wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc;) including all necessary drilling, bolting or riveting, etc; and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 15 | S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc; complete all as specified and directed. (Each line to be measured separately) |
| 16 | S&F of 450mm dia concerna coil uses high tensile hot dipped galvanised or stainless steel (AISI 304/316)for maximum security key coil wire diameter 2.5mm (+-0.1mm) core wire diameter and 0.5mm (+-0.05mm)blade thickness, coil often featuring (BT65 or BTO 22 blade type) are typically extended 7-13 m length in each coil bunddle fixed with 'J' clips or steel clips(1.5mm to 2.5mm), 3 clips min required to fixed of each bunddle of coil complete all as specified and directed. |
| 17 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) |
| 18 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish complete all as specified and directed |
| 19 | M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement rendering (1:4) complete all as specified and directed. |
| 20 | M/L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile n.exc 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed. |
| 21 | M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in vertical surface such as skirting dados and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 22 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed. |
| 23 | M&L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 24 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 25 | M&L for machine cut kota stone for flooring, staircase 20-22mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 26 | M&L for machine cut kota stone slab 20-22mm thick in riser pf steps, skirting, dado over cement screed base laid and jointed with grey cement slurry mixed with puigment to match the shade of the slab including rubbing and polishing bedded on 10mm thick bedding layer in cement mortar (1:4) complete all as specified and directed. |
| 27 | Demolition of brick / block masonry built in cement mortar including all quoins, arches, pillars etc and clearing off the premises. |
| 28 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 29 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 30 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 31 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc; and binding with mild steel binding steel wire (annealed) not less than 0.9mm dia. |
| 32 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas , manhole cover , tank platform etc. complete all as specified and directed. |
| 33 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified. |
| 34 | M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 35 | M&L for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed. Note: WPC shall be paid separately. |
| 36 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat birla 2.00mm thick white putty complete all as specified and directed. |
| 37 | M&L for preparation of new plastered or unplastered decorated surfaces of walls or cornics applying two coat of exterior emuslion paint and including 2mm thick external wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed. Note:- Exterior emulsion paint to be done by Roller. |
| 38 | M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 39 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed. |
| 40 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n.exc 4.00 sqm each complete all as specified and directed. |
| 41 | S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed. |
| 42 | S&F of factory made solid panel PVC moulded door shutter with particle board core ,28 to 30mm thick (stiles) with 2, 4 or 6 raise panel design with 2mm thick moulded pvc sheet on the front face and 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification complete all as specified and directed. |
| 43 | S&F of powder coated anodised aluminium frame (minimum thickness of powder coating 50 microns) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc; complete all as specified and directed. |
| 44 | S&F of powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. (minimum thickness of powder coating 50 microns), complete all as specified and directed. |
| 45 | S&F of powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (2 no.) (minimum thickness of powder coating 50 microns) complete all as specified and directed. |
| 46 | S&F in repair softwood 2nd class clean swan with butt joints 20mm thick board in shelves, partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specfied and directed. |
| 47 | S&F of alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specfied and directed. |
| 48 | S&F of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specfied and directed. |
| 49 | S&F of extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specfied and directed. |
| 50 | S&F of aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed. |
| 51 | S&F of factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc; Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc; after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 52 | S&F of 5.50mm thick plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads complete all as specified and directed. |
| 53 | S&F of anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 54 | S&F of aluminium (die cast body) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 55 | S&F of 4.00mm thick figured glass, pinhead type in squares n.exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed. |
| 56 | S&F of stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts including leaping wooden complete all as specified and directed. |
| 57 | Taking down GI tubing with connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed. |
| 58 | S&F of CPVC pipes 16mm SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 59 | Taking down GI tubing with connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed. |
| 60 | S&F of CPVC pipes 20mm SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 61 | S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 62 | S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 63 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity make white in colour and PVC flush pipe 32mm dia complete all as specified and directed. |
| 64 | S&F in repairs vitreous china squatting pan orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc; complete all as specified and directed. |
| 65 | S&F in repairs vitreous china urinal full stall type, white including connections to flushing pipe and outgoing pipes fixed complete all as specified and directed. |
| 66 | S&F in repairs for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap swan neck type chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete complete all as specified and directed. |
| 67 | S&F of 600x1500 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 68 | S&F of 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 69 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness . |
| 70 | S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E- grid suspended ceiling grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips complete all as specified and directed. |
| 71 | S&F of PVC hollow wall and roof panelling consisting of PVC profile 250mm wide and 6mm thick reinforced with PVC linining 10mm c/c with interlocking arrangement fixed to wall with PVC rowl plugs and steel screws 40cm c/c vertically by drilling holes fixing to walls of reqd height fixed with PVC cassing and capping for top and corner portion of panneling fixed complete all as specified and as directed . |
| 72 | Dismantling of asbestos cement (corrugated, semicorrugated, etc;) sheets in roof coverings. |
| 73 | M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 74 | M&L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 75 | M&L for steel work in tabular trussess including special shaped washer etc complete using ERW or inductrion butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed. |
| 76 | S&F of 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and as directed. |
| 77 | S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 78 | S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed. |
| 79 | S&F in repairs shower rose 125mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed. |
| 80 | S&F of kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 81 | S&F of utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws as specified and directed. |
| 82 | S&F of soap dish chromium plated heavy duty complete all as specified and directed. |
| 83 | S&F in repair 25mm MS curtain rail mild steel chromium plated with fixing brackets, rollers of annodised a,uminium alloy all as specified and directed. |
| 84 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in cement mortar (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc; and making good complete all as specified and directed. |
| 85 | Taking down eaves gutters and rainwater pipes including all fittings as specified and directed. |
| 86 | S&F of 75 mm UPVC pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 87 | S&F of 75 mm UPVC pipes in repair single socketed in any length laid in floor complete all as specified and directed. |
| 88 | S&F of 75 mm UPVC bend complete all as specified and directed. |
| 89 | S&F of 75 UPVC junction single,(single T) equal or unequal complete all as specified and directed. |
| 90 | S&F of 110 mm UPVC pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 91 | S&F of 110 mm UPVC bend with complete all as specified and directed. |
| 92 | S&F of 110 UPVC junction single,(single T) equal or unequal complete all as specified and directed. |
| 93 | S&F of 110mm UPVC vent cowl complete all as specified and directed. |
| 94 | Dismantiling water tank PVC 1000 Ltrs and removing from site. |
| 95 | S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity including fittings complete all as specified and directed. |
| 96 | S&F in repairs gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as specified and directed. |
| 97 | S&F in repairs ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 98 | Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs . |
| 99 | Demolition of mud in roof any thickness including plastering and leeping removed as directed. |
| 100 | M&L for for 40 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as in PCC padding over roof slab complete all as specified and directed. |
| 101 | M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound complete all as specified and directed. |
| 102 | Supply only integral water proofing compound. |
| 103 | M&L for preparation of newly plastered surface making surface completely dry after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete and applying two coats of aluminium paints on APP complete all as specified and directed. |
| 104 | M&L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed. |
| 105 | M&L for 100mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 106 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushioning complete all as specified and directed. |
| 107 | M&L for 25mm fine sand filling under floor or in foundations in layers including watering and consolidation complete all as specified. |
| 108 | S&F in repairs 18mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in pelmet box to timber frame work complete all as specified and directed. |
| 109 | S&F of 5mm thick 18mm wide wooden fillet for beading purpose of cupboard shutter including necessary nails screws etc; complete all as specified and directed. |
| 110 | Demolition and breaking up 200mm bore dia drain pipe (salt glazed ware, AC or reinforced cement concrete) set in cement mortar. |
| 111 | M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 112 | M&L for concrete bed to drain pipes 200mm bore in cement concrete (1:3:6) type D-2 (using 20mm graded stone aggregate) including packing under and haunching against sides of pipe after they are laid and tested complete all as specified and directed. |
| 113 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out in soft / loose soil. |
| 114 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as directed. |
| 115 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc1.5m as in soil complete all as directed. |
| 116 | S&F of hat pegs, solid body 125mm to 175mm long cast iron or mild steel chromium plated complete all as specified and directed. |
| 117 | S&F of mild steel hat and coat hooks solid body, 175mm to 250mm long complete all as specified and directed. |
| 118 | S&F of 4.00mm dia plain mild steel wire galvanised class 3 in mosquoti nets/cloth drying including straining and fixing to wood,concrete or steel post and /or to straining bolts including securing with and provision of galvanised iron tying wire galvanised iron staples or steel pins complete all as specified and directed. |
| 119 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit or to refixing of serviceable items(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 120 | M&L for point wiring with 1.5 Sqmm (Nominal Area) FRLSH PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metalic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting modular switches, socket, bell push, fan regulators etc. as required with modular frame and cover of 1 module to 18 module as required at site all as specified and as directed for the following points :- |
| 121 | One light point controlled by one 1-way switch complete allas specified and directed. |
| 122 | One ceiling / exhaust fan point controlled by one switch complete allas specified and directed. |
| 123 | One three pin socket out let 5 amps on independent board complete allas specified and directed. |
| 124 | One three pin socket out let 5 amps on Same board complete allas specified and directed |
| 125 | - ditto - all as per item No 119 above but with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin socket out let 15 amps on independent board complete allas specified and directed. |
| 126 | - ditto - all as per item No 119 above but with 4 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one geyser point on independent board complete allas specified and directed. |
| 127 | S&F of switch modular type 6A 240 Volts complete allas specified and directed. |
| 128 | S&F of switch modular type 15A 240 Volts complete allas specified and directed. |
| 129 | S&F of ceiling rose surface type bakelite 65 x 50 mm with three terminals complete allas specified and directed. |
| 130 | S&F of socket outlet 2 in 1, 3 pin, 5/6 amp modular 2 module type with shutters complete allas specified and directed. |
| 131 | S&F of socket outlet 2 in 1, 3 pin, 5 and 15 amp modular type 2-module shutters complete. |
| 132 | Taking down ceiling fan and cable end, dismantling blades and removing fan and Each blades to E/M store yard complete all as directed. |
| 133 | S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE with brushless direct current motor (BLDC) with remote controle complete all as specified and directed. Note: (1) Rate for trasportaion of ceiling fan to deposit at E/M storeyard are deemed to be incuded in this rate with taking down old fan if found at site complete allas specified and directed. |
| 134 | S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete allas specified and directed. |
| 135 | S&F in repair LED light fitting 1x20 watt, 220 volt AC box type made up of aluminium housing with driver, holders,including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 136 | S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 volt AC decorative type with driver, holders,including LED lamp connecting up with three core flexible copper conductor of suitable size complete all as specified and directed. |
| 137 | S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 concrete all as specified and directed. |
| 138 | S&F in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with GI bracket of dia 40mm light grade of suitable size with concrete all as specified and directed. |
| 139 | S&F LED decorative wall Lights 16/20 W 230 V complete with 2 x bulbs and concrete all as specified and directed. |
| 140 | M&L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 6 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads. |
| 141 | S&F in repair TPN horizontal type, 4 way, 415 Volts, 50 Hz, indoor type double door sheet metal enclosure IP-54 DB's IK-09 flush mounted with 200 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCB 100 Amps, four pole as incomer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor complete all as specified and directed by Eng-in-charge. |
| 142 | S&F in repair MCB TPN 240 volts 25- 100 Amps, 16KA, B-series concrete all as specified and directed. |
| 143 | S&F in repair sheet steel factory made, powder coated MCB DB with bus bar 200Amps. Neutral link, Earth bar, double door SPN 8 way 230volts concrete all as specified and directed. |
| 144 | S&F of MCB single pole 240 volts 6-32 Amps, 10KA, B-series, concrete all as specified and directed. |
| 145 | S&F of MCB SPN 240 volts 0- 32 Amps, 10KA, B-series, concrete all as specified and directed. |
| 146 | M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed. |
| 147 | S&F of electric water heater, storage type steel body with mettalic inner tank and 2KW heating element capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, automatic thermal cut-out and multi function valves, NRV, Steel braided 450 mm connection pipe etc concrete all as specified and directed. |
| 148 | S&F SPN enclosure with a two pin and earth plug and socket with single pole MCB 20 Amp concrete all as specified and directed. |
| 149 | Supply, laying, testing & commissioning of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 4 core 10 Sqmm of conductors with thimbles complete all as specified and directed. |
| 150 | M&L for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and directed. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured and complete all as specified and directed |
| 151 | Supply and laying brick common burnt sub class 'B' old size and for protection of cable laid in trenches for underground cable of compressive strength not less 75 Kg/Sqcm complete all as specified and directed. |
| 152 | M&L for GI steel tubing medium grade of 50 mm dia for cable protection, passing under road/floor or for fixing to poles/walls complete all as specified and directed. |
| 153 | M&L for pipes galvanized, “Medium class”, supplied and laid complete including fittings, like bends, joints, elbows, tees, reducer, bell mouth plug etc. 25 mm (1.”) dia concrete all as specified and directed. |
| 154 | M&L for valve, stop, screwed, supplied and installed complete for size 25 mm (1”) dia pipe concrete all as specified and directed. |
| 155 | Cutting cast iron/GI pipe up 40/50 mm bore, in position for insertion of new tees of suitable size including jointing materials complete all as specified and directed. |
| 156 | M&L for pipes galvanized, “Medium class”, supplied and laid complete including fittings, like bends, joints, elbows, tees, reducer, bell mouth plug etc. 15 mm (1/2.”) dia complete all as specified and directed. |
| 157 | M&L for water tap of brass/gun metal 15 mm bore complete all as specified and as directed. |
| 158 | Supply and installed desert cooler electric driven (single phase), having nominal air flow capacity of 4000 Cum per hour (or nearest size) with following specifications :-Body:- (i) PVC body with tank capacity min 70 ltr Incl Iron stand made up of 40 mm angle ironFan Motor:- (i) Exhaust Fan motor should be copper winding, min 450 mm Sweep Cooler fan, Double ball bearing, three speed (High/Medium/Low) with PVC/methalic blade duly painted with snthetic anti corrosive oven cured paint fitted to body fan motor make from GP-I of PS will be applicable. (ii) Input Cap 200 watt(approx), Speed 1400 RPM, 230 Volts, 50 Hz, Air Delivery 4000 Cum/HrsSubmersible Pump Motor:- Input capacity 40 watt (Approx), speed 1300 RPM, 230 volts, 50 HzSwitches/Regulator:- One switch and one speed selector switch (Regulator) 04 position for controll of pump motor and fan motor respectively will be provided on the body.Pads :- High density Honey comb cooling pads of proper thickness will be provided in each panel (Set of three).Drain Plug :- Drain plug shlall be provided from pump motor to three panel fitted on the cooler body along with 01 nos of float valve.Cord :- Flexible cord PVC Shethed and Insulated size 40/0.25 mm (1.5 Sqmm) 3 core (as per IS 694/1977) length 5 m long with three pin 5 Amp ISI marked bakelite plug top shall be provided for power supply to cooler.Note :- (i) All desert cooler should be fitted on first floor or second floor minium height is 8 m (ii) Contrctor should be provide all Sefty material for worker for installation of desert cooler(ii) Contrator should be submitted 01 year guarntee/waranty of desert fan motor and submersibale pump Motor. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender