Tender For Special Repair To Roof Sheets, False, Ceiling, Plastering Of Wall And Misc Work At Classroom Of Secondary Wing
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Aug 2026
13 days left
EMD
96578
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Roof Sheets, False, Ceiling, Plastering Of Wall And Misc Work At Classroom Of Secondary Wing
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc,complete all as specified and directed. |
| 2 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered complete all as specified and directed. |
| 3 | M&L for 15 mm thick rendering on vertical surface in CM 1:4 with and incl water proofing compound @100 ml per 50 Kg bag of cement |
| 4 | M&L rendering 20mm thick with cement mortar 1:4 on fair faces of brick work in two layers (10mm and 10mm) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement complete all specified and directed.Note: WPC will be measured separately |
| 5 | Supply only Integral water proofing compound complete all as specified and directed. |
| 6 | M&L rendering 5mm thick of cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth(without using extra cement.),complete all as specified and directed. |
| 7 | Preparing new surfaces of ceilings and applying three coats of white wash,complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces of wall and applying Two or more coats of acrylic smooth exterior paint with silicon additives @ 1.67 litre/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm over new surfaces. complete all as specified and as directed. |
| 9 | Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as directed. |
| 10 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based corrugated steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler including dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering as specified. |
| 11 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler including dismantling plain or corrugated steel sheeting any gauge ,thickness in roof covering as specified. |
| 12 | S&F galvalume zinc coating with grade Z275 corrugated mild steel sheet 0.63 mm thick (BMT) of two corrugation side lap and washers, in roofs, wall fixed with self tapping screw, butyl tape, end foam filler etc fixed with specified. |
| 13 | S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 14 | S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.2x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender and M & L for 4m thick Non Asbestos designed Cement E board as approved by GE fixed in ceiling including dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed. |
| 15 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed. |
| 16 | S&F Glazed ceramic coloured tiles in vertical surfaces 450x 300x 7 mm thick set and jointed in adhesive compound as per manufacturer's instructions & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all specified and directed. |
| 17 | M&L Non - skid Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in adhesive compoundas per manufacturer's instructions and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes including dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 18 | Demolition Brickwork or stone/boulder masonry, built in cement mortar including removing to rubbish complete all as specified and as directed. |
| 19 | M&L for brick work with sub class B bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed. |
| 20 | M&L for brick work with sub class -B bricks, built in cement mortar 1:4 straight or curved on plan to any radius in half brick thick walls complete all as specified and directed. |
| 21 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth,complete all as specified and directed. |
| 22 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) completed all specified and directed. |
| 23 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) completed all specified and directed. |
| 24 | S&F factory made second class hard wood kiln seasoned and chemically pressure treated plain, solid straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chemfered, put together with glue pinned at joints complete all as specified and as directed. |
| 25 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 26 | S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and directed. |
| 27 | S & F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21 completed all specified and directed. |
| 28 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed , complete all as specified and directed. |
| 29 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised completed all specified and directed. |
| 30 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and directed. |
| 31 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy completed all specified and directed. |
| 32 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 including taking down /dismantling wrought iron or milld steel work of any description not otherwise provided for complete all specified and directed. |
| 33 | M & L expanded metal, n. exc. 4.0 Kg cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and as directed. |
| 34 | M & L for preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 35 | M&L plain cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in coping, hauncing, benching etc rounded or chamfered on edges complete all as specified and directed. |
| 36 | M&L for 100 mm thick PCC 1:2:4 Type D-2 using 20mm graded stone aggregate as in path/hardstanding complete all as specified and directed. |
| 37 | M&L Pre polished chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 20 mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 38 | S&F in repair vitreous china, orrisa squatting pan of pattern water closet seat of size 580mm x 440mm white with and incl 'P' or 'S' trap and provision of lime concrete bedding in repairs,complete all as specified and directed. |
| 39 | S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalent make / model with all accessories,complete all as specified and directed. |
| 40 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand and waste pipe as requred complete all as specified an as directed. |
| 41 | PVC connection 15 mm bore 450 mm long,complete all as specified and directed. |
| 42 | S & F in repairs 15mm bore angular concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions,complete all as specified and directed. |
| 43 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule,complete all as specified and directed. |
| 44 | S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed,complete all as specified and directed. |
| 45 | S&F in repair, Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as specified and as directed |
| 46 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. |
| 47 | M&L preparation of New decorated plastered surfaces of walls and applying three coat of white wash, complete all as specified and as directed. |
| 48 | M&L preparation of old decorated plastered surfaces of wall and applying one coat of white wash, complete all as specified and as directed. |
| 49 | M&L preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed. |
| 50 | M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed. |
| 51 | M&L for Preparation old decorated plastered surfaces of wall and applying two coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed |
| 52 | M&L for preparation of old decorated plastered wall surface applying one coat of oil bound distemper on wall as specified and as directed. |
| 53 | M & L complete removal of existing treatment surface of walls and preparation of wall and applying 1 mm thick acrylic wall care putty and applying two coats of oil bound distemper over a coat of alkali resistance priming paint complete all as specified and directed. |
| 54 | Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint,complete all as specified and directed. |
| 55 | M & L for preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 56 | M&L preparation of old painted iron/steel surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 57 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punnching or drilling out of glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 58 | S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all specified and directed. |
| 59 | S & F 4 mm thick frosted glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all specified and directed. |
| 60 | Dismantling fillet, rails, posts, rafters, purlins etc under 40 Sq.Cm in section complete all as specified and as directed |
| 61 | S & F second class hard wood plain fillet in rectangular or triangular in section, clean swan secured with screws or beads sectional area exc 13 sq cm but n exc 25 sq cm complete all as specified and as directed |
| 62 | M&L in repair 18/19 mm thick pre-laminated particle boards exterior grade prelaminated one side with decoratative choice lamination & other side balancing white lamination fixed in screws to timber frame work, complete all as specified and directed. |
| 63 | M&L in repair 12 mm thick pre-laminated particle boards exterior grade prelaminated one side with decoratative choice lamination & other side balancing white lamination fixed in screws to timber frame work, complete all as specified and directed. |
| 64 | Taking down carefully existing unserviceable copper/ aluminium point wiring (light,fan , call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, bell push,call bell,bracket light fittings and making good to the disturbed surface complete all as directed by Engr-in-Charge. |
| 65 | Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified by Engr-in- Charge. |
| 66 | Taking down carefully unsv aluminium submain wiring of any type /location including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge. |
| 67 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed. |
| 68 | M&L point wiring with 1.5 Sqmm copper conductor single core PVC insulated FRLSH unsheathed 1100 volt grade multistanded cable drawn through and including PVC casing and caping medium grade of suitable size and its accessories as required at site, fixing on surface of wall, roof mounted on sunk mild steel pressed terminal box 1.22 mm thick of suitable size duly painted with red oxide metal primer with 3.0 mm thick plastic laminated sheet top cover for mounting modular switches, sockets, etc including PVC insnulated and unsheathed single core multi stranded copper conductor cable of size 1.5 sqmm (FRLSH) green in colour as earth continuity conductor connected to common earth and earth for one light/fan/Cell Point controlled by one 1-way switch 5 Amp, duly fixed with copper lugs and flexible pipe from ceiling rose to fitting/fixtures complete all as specified and as directed. |
| 69 | Description all as per Item No. 68 but One 3 point 5 Amps socket outlets point controlled by one switch on the same board |
| 70 | Description all as per Item No. 68 but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board |
| 71 | Description All as per item No 68 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board,complete all as specified and directed. |
| 72 | S & F in replacement Modular Switch , single pole one way 6 Amps , 1 module , 230 Volts complete all as specified. |
| 73 | S & F in replacement Modular Switch , single pole one way 16 Amps , 1 module , 230 Volts complete all as specified. |
| 74 | S & F in replacement Modular Socket , 2 /3 pin combined, 6 Amps , 2 module complete all as specified and directed. |
| 75 | S & F in replacement Modular Socket , 2/3 pin combined , 6/16 Amps , 2 module complete all as specified and as directed. |
| 76 | S&F ceilling rose(white) three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified and as directed |
| 77 | S & F in replacement modular ceiling fan regulator step type 2 Module, 120 W heavy duty suitable to work on 230 Volt AC supply complete all as specified and as directed. |
| 78 | S & F Lamp holder (white) with insulated body, with back plate suitable for pendant / batten fittings complete all as specified and as directed. |
| 79 | S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and as directed. |
| 80 | S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete enclosure all as specified and as directed. |
| 81 | S & F RCBO,s for earth leakage , overload and short circuit protection Double Pole 230volts , 30mA, suitable for fixing on MCB DB of capacity 32 Amps complete all as specified. |
| 82 | S&F MCB SP, 240 Volts 6-32 A 50 Hz, breaking capacity of 10 KA, B-Curve complete all as specified and as directed. |
| 83 | S&F LED luminarie tube light fitting basic all purpose surface/wall mounted decrotative slim with polycarbonate housing & integrated electronic driver, 4 feet LED with high efficient LEDs 20 watt, (or nearest next higher wattage) with all accessories, suitable for operation on AC, single phase 220/230 Volts, 50 Hz, 6500K complete all as specified and as directed. |
| 84 | S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. |
| 85 | Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as directed. |
| 86 | Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed. |
| 87 | Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed. |
| 88 | Materal and labour for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed.(Note: Thickness after punning down shall be measured for payment) |
| 89 | Supply & Laying well burnt brick , locally available best quality (sub class \\"B\\" bricks ) laid in trenches perpendicular to UG Cable protection complete all as specified. |
| 90 | Supply & Laying XLPE LT heavy duty UG Cable of size 95 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. |
| 91 | S & F GI Tubing light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed. |
| 92 | Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with with replacement of unsv core PVC inslulated PVC sheathed 3 core multistanded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal pver hauling the fan duly painted with two coats of synthetic enamel paint of approved coloures as directed by GE,complete all as specified and as directed |
| 93 | M&L Concealed sub-main wiring alongwith earth wire of size of 2 x 6 sq. mm + 1 x 6 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of suitable size with all fittings and accessories (ISI marked)alongwith the wiring and connected DB to DB/Main board with proper copper lugs including cutting chases in wall, floor etc and making good to walls, floors etc as per existing specifications complete all as specified and as directed. NOTE : (i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED |
| 94 | M&L Concealed sub-main wiring alongwith earth wire of size of 2 x 4 sq. mm + 1 x 4 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of suitable size with all fittings and accessories (ISI marked)alongwith the wiring and connected DB to DB/Main board with proper copper lugs including cutting chases in wall, floor etc and making good to walls, floors etc as per existing specifications complete all as specified and as directed. NOTE : (i) Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED |
| 95 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia connected to main earthing lead from earth electrode to test point upto 7.5 metre drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I,complete all as specified and directed. |
| 96 | Supply and fix cable end termination kit for LT 1.1 KV cable for cable 10-16/2 core cable complete all as specified and as directed. |
| 97 | Cutting and trimming of tree branches to clear the over head lines in the arc of LT overhead lines/feeders (including repairing and jointing of ACSR conductor if damaged during cutting of trees) and removal of trimmed branches of tree and depositing the same in waste bin inside the campus all as specified and as directed.Note: Span length not more than 50 Mtr Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender