Tender For Repair To Rolling Shutter, Hanger Door, Gates, False Ceiling And Bird Proofing Net In Tech Area At Af Stn Jaisalmer
Tender Value
28 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
19 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Rolling Shutter, Hanger Door, Gates, False Ceiling And Bird Proofing Net In Tech Area At Af Stn Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Taking down rolling shutter from any location, straightening of curtains, making good of edges, guide chanels, necessary riveting/welding, repairing to hood cover, rotating shaft and refixing the same after repair, greasing the guide channel to make smooth functioning, replacement of steel spring, ball bearing etc if required(Replacement of spear parts shall be measured and paid seperatly as supply only under respective item) complete all as specified of size: -Not exceeeding 6 Sq.m area |
| 2 | All as per item No 1.00 here in before but Exceeeding 6 Sq.m area |
| 3 | Supply only the following spares/parts/acessories of rolling shutter(s) complete all as specified and directed.: - |
| 4 | Curtain iterlocking curls 75-85 mm wide (each strip) made to shape from 1 mm thick mild steel sheet. |
| 5 | 40mm bore medium grade mild steel pipe made to shape & size as rolling shaft |
| 6 | 25mm bore medium grade mild steel pipe made to shape & size to operate the gear box system by crank handle. |
| 7 | Lock plate of mild steel flat or angle iron as required at site. |
| 8 | Guide chennel 3.15 mm thick mild steel sheet made with 75mm depth including necessary hold fasts. |
| 9 | Hood cover, 1mm thick mild steel sheet made to shape. |
| 10 | Ball bearing of suitable size and description. |
| 11 | Bevel gear box and crank handle. |
| 12 | S&F in Repair MS base wheel of dia 200mm and depth 60mm along with 2 Nos ball bearings and central pin on each wheel for hanger/BP door complete all as specified and directed. |
| 13 | S&F in Repair Mild steel top guide roller of dia 100mm and thickness 75mm, fabricated with nuts and bolts alongwith ball bearing and pin on each roller/pully for hanger/BP doors complete all as specified and directed. |
| 14 | M&L for Lifting up carefully by mechanical means steel hanger/blast pen door leaf of size area n. exc. 30 Sq.m each, inspecting the parts/members of doors, incl. repairs, welding as required, removing unserviceable members, unserviceable CGI sheets, unserviceable pully/base wheels/top rollers/ nut bolts etc. and fixing only new parts/members as mentioned here in before, fixing steel door back in same position after proper servicing & greasing for smooth noise-less movement/operation of doors complete all as specified and directed.NOTE : Supply only spare parts to replace unserviceable members, nuts, bolts,wheels,rollers etc. shall be measured and paid separately. |
| 15 | Easing, adjusting,cleaning of rails, greasing of base wheels and top guide wheel of hanger/ BP door leaf having area n. exc. 40 Sq.m each and height not exc. 10 metre incl. minor repairs, welding, adusting base wheels and top rollers etc. to make the sliding door leaf noise-less smooth operation, complete all as specified and directed. |
| 16 | S&F for Iron gate Hook and Eyes for holding window leafs complete all as specified and directed. |
| 17 | S&F Steel rolling shutter (curtain made of 1mm thick mild steel sheet) with ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide chennels, strike plate etc and one shop coat of primer erected in position as indicated push pull or manual type, thickness of laths 1mm, including taking down carefully existing old rolling shutter complete all as specified of size/area as per site requarement |
| 18 | S&F for Steel rolling shutter, gear operated type with bevel gear box and crank hanle (curtain made of 1mm thick mild steel sheet) with ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide chennels, strike plate etc and one shop coat of primer erected in position as indicated push pull or manual type, thickness of laths 1mm, including taking down carefully existing old rolling shutter complete all as specified of size/area exceeding 6 Sq.m each shutter. |
| 19 | Welding in repairs exc. 2.5cm but n.exc. 5cm in length, thickness of metal to be welded exc. 6mm but n. exc. 9mm sheets/ plates/any other steel members, incl. cleaning and preparing the surfaces while welding, and bevelling of edges as required complete all as specified and directed. |
| 20 | S&F Framed mild steel work as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 21 | S&F for Purpose made butt hinges conforming to Fe-290 Gde-E-165 suitable for fixing to stone/ concrete door and window frames complete all as specified and directed. |
| 22 | S&F Mild steel, plain, black sheet of 1.60mm thick for wall ladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 23 | NOTE FOR SERIAL ITEM NO. 4 to 14: - The work is required for tech building of height upto 10 m. As such, Contractor will arrange suitable safety precaution for the labour at his end and cost of the same deemed to be included in rates quoted by the contractor. |
| 24 | S&F Framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 25 | Excavation in post holes (for similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken eubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 26 | M & L for Cement concrete 1:3:6 type C2 using 40 mm graded stone aggregates in walls or retaining walls, any thickness, size or shape includin pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 27 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 28 | S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts. posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 29 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 30 | S&F in repair Wire netting size of mesh 25mm of stainless steel wire 0.71mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and directed. |
| 31 | S&F in repair Anti-bird net of polyester wooven of aperture size 20mm x 20mm x 2 mm thread (Garpil) at a height of 10 metre, complete all as specified and directed. |
| 32 | S&F in repair Rough cast wired glass 6.4mm thick and glazing with oil putty/bead area not exc.1.00 sqm each including taking out old broken glass complete all as specified and directed. |
| 33 | S&F in repair Mild steel screw bolts ( Machine made ) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to fitted with washers and one hexagonal or square nuts exc 5 cm but not exc 15 cm long fixed complete all as specified and directed. |
| 34 | Fabrication and Eraction of MS Chajja with CGI sheet including Fixing with Holding down bolts etc with following specification .(i) Demolition of reinforced cement concrete chajja of any description and in any position not otherwise specficially provided for and Cutting grooves in stone/ concrete wall 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 and plastering the groove after fixing of chajja and applying Two coats of exterior acrylic emulsion over and including a coat of exterior (water based) primer on newly plastered surface complete all as specified .(ii) Frame work for chajja using 35mm x 35mm x 5mm angle of horizontal length (2Nos.) as per size required and 2 Nos 0.38m length perpendicular to wall including 15mm ingraved in wall and 2 Nos vertical of length 0.30m and 2 Nos Diagonal of length 0.41m including Preparing new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified. (iii) Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick bent quarterly on front side of colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws on frame and lenth as per size required and width of sheet 0.75m as per site requirement etc completed all as specified. |
| 35 | (A) Length of Chajja -1.48 m |
| 36 | (B) Length of Chajja -1.20 m |
| 37 | (C) Length of Chajja -0.87 m |
| 38 | (D) Length of Chajja -0.74 m |
| 39 | Cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting cement slurry with pressure gun to fill complete crack with slurry 1:3 to prevent leakage in roofs complete all as specified and directed. |
| 40 | S&F in repair Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap fixed with galvanised mild steel L / J type hook including washer etc as in roofs, walls, gates cladding of hanger / BPs with grade of zinc coating 275 etc complete all as specified and directed. |
| 41 | S&F in Repair Galvanised corrugated mild steel sheeting (Except sheeting any thickness) with two corrugations side lap fixed with galvanised mild steel L / J type hook including washer etc as in roofs, walls, gates cladding of hanger / BPs complete all as specified and directed. |
| 42 | S&F in repair Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 43 | S&F in Repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed. |
| 44 | S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (Except sheeting any thickness) as in roof coverng/cladding to wall,in repair fixed with self tapping screws etc. complete all as specified and directed. |
| 45 | S&F in Repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 46 | S&F in repair Powder coated GI snap grid frame work of size 605mm x 605mm for false ceiling complete with acessories all as specified and shown on serial page No.186 of MES Schedule Part-II complete all as specified and directed. |
| 47 | S&F in repair 4 mm thick E-board, multipurpose, decorative type fixed in grid frme work ceilings as panels, complete all as specified and directed. |
| 48 | S&F in repair Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 49 | M&L 75 mm thick Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in floor, complete all as specified and directed. |
| 50 | M&L 75 mm thick Plain Cement Concrete 1:2:4 type B-2 using 20mm graded crushed stone aggregate as in flooring / hardstanding etc. complete all as specified and directed. |
| 51 | M&L for Applying one coat (finishing coat) of synthetic enamel paint including peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified and directed. |
| 52 | M&L for Two coats of synthetic enamel paint over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, over a coat of red oxide primer including preparation of new surfaces, for height not exceeding 8.50 metre complete all as specified and directed. |
| 53 | M&L for Two coats of synthetic enamel paint over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, over a coat of red oxide primer including preparation of new surfaces and disruptive/camouflaging pattern of req. shades, for height not exceeding 8.50 metre complete all as specified and directed. |
| 54 | M&L for Two coats of synthetic enamel paint over old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, over a coat of red oxide primer including removal / preparation of old surfaces and disruptive/camouflaging pattern of req shades, for height not exceeding 8.50 metre complete all as specified and directed. |
| 55 | Dismantling of Plain or corrugated steel sheeting, any gauge, hickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 56 | Dismantling structural steel works or of any description / type including doors, gates etc complete all as specified and directed. |
| 57 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 58 | Demolition of plain Cement Concrete in ground floor and paving not exc 15cm thick (below or above) ground level complete all as specified and directed. |
| 59 | Demolition of wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and metal frame work complete all as specified and directed. |
| 60 | Taking down carefully and Refix existing electrical fixtures complete with fittings such as switch boards, Socket Boards, LED tube light fittings, 2 X2 LED lights, Ceiling fans, Exhaust fans, geysers, Metalclad box ,DBs etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Taking down carefully aluminium point wiring on wooden battens/through conduit (light fan, socket or power) complete with fittings such as switches, wooden batten, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engineer-in-Charge |
| 62 | M&L for concealed conduit point wiring controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 25 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly including Metal flush mounting box and white colour plates with frame for modular fitting for One light point controlled by one, one way switch complete all as specified and directed. |
| 63 | All as per item No 50 here in before but One fan point controlled by one, one way switch |
| 64 | All as per item No 50 here in before but One socket outlet 3 Pin, 6 Amp on independent board |
| 65 | All as per item No 50 here in before but One socket outlet 3 Pin, 6 Amp on same board. |
| 66 | All as per item No 50 here in before but One bell point controlled by one bell push |
| 67 | All as per item No 50 here in before but with 4 sqmm for phase & neutral and 4 sqmm for earth wire for socket out let 15 Amps on independent board. |
| 68 | S&F Modular switch 6 Amp 250 V AC one way one module complete all as specified and directed. |
| 69 | S&F Modular switch 20 Amp 250 V AC one way with indicator one module complete all as specified and directed. |
| 70 | S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 71 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 72 | S&F Modular Fan regulator step type, 120W - 2 module complete all as specified and directed. |
| 73 | S & F Modular Bell Push 1 Module complete all as specified and directed. |
| 74 | S&F Modular AC Socket and heavy duty plug with metal box for AC, 3 Module, Single Pole MCB not less than 20 Amps, repturing capacity 10 kA including taking down old unserviceable complete all as specified and directed. |
| 75 | M&L for concealed conduit point wiring controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 25 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly including cast iron/pressed steel terminal/wooden boxes(as per site requirment) Covered with laminated sheet top cover switches/ sockets/ fan regulators fixed with cadmium plated machine screws complete all as specified and directed for One light point /fan point/exhaust fan controlled by one way switch |
| 76 | All as per item No 63 here in before but One bell point controlled by one bell push |
| 77 | All as per item No 63 here in before but One socket outlet 5 Amps on independent board |
| 78 | All as per item No 63 here in before but One socket outlet 5 Amps on the same board |
| 79 | All as per item No 63 here in before but One light point controlled by one 2-way switch |
| 80 | All as per Sl item No 63 herein before but with 4 Sqmm for phase & neutral and 4 sqmm for earth wire for socket out let 15 Amps on independent board. |
| 81 | S&F switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as specified and directed. |
| 82 | S&F switch piano flush type single pole one way 15 Amp (ISI Marked) complete all as specified and directed. |
| 83 | S&F Bell push flush type single pole one way 5 Amp (ISI Marked) complete all as specified and directed. |
| 84 | S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) complete all as specified and directed. |
| 85 | S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked) complete all as specified and directed. |
| 86 | S&F switch piano flush type single pole two way 5 Amp complete all as specified and directed. . |
| 87 | M&L for bell , AC 230 Volts, single pole (ISI Marked) complete all as specified and directed. |
| 88 | Supply and fix Electronic fan regulator 230 volts, step type, socket type, hum free 120 watt ISI Marked, including taking down unserviceable complete all as specified and directed. |
| 89 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/ Polycarbonate,isolated body (ISI Marked) complete all as specified and directed. |
| 90 | Taking down old unserviceable Distribution board any type complete all as specified and directed. |
| 91 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral complete all as directed by Engineer-in-Charge. |
| 93 | Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- |
| 94 | (a) S & F MCB, 6 to 32 Amp, SP, 240 Volt, 10 KA, 'C' curve complete all as specified and directed. |
| 95 | (b) S&F MCB, 40 Amp, SPN, 240 Volt 10 KA, 'C' curve complete all as specified and directed. |
| 96 | Supply and fixing in repair surface and wall mounted LED tube light fittings of cap 10W, Two feet Basic all purpose surface and wall mounted LED batten with extruded PVC housing & integrated electronic driver complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and fixing in repair surface and wall mounted LED tube light fittings of cap 22W , Four feet Basic all purpose surface and wall mounted LED batten complete all as specified and directed. |
| 98 | Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 6.00 Sq mm 1100 volts grade including one 6.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping/conduit complete all as specified and directed by Engineer-in-Charge. Note : Two run of 6.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor shall be measured & paid as one unit. |
| 99 | Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 4.00 Sq mm 1100 volts grade including one 4.0 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping / conduit complete all as specified and directed by Engineer-in-Charge. Note : Two run of 4.00 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit. |
| 100 | S&F in repair LED Panel 36 watt with 2ft x 2 ft slim panel with super bright Recess mounting LED Slim ceiling light with white powder coated extruded aluminium housing and highly efficient light smoothing optics to deliver superior illumination including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23/0.0076 including taking down old unserviceable fittings complete all as specified and directed. |
| 101 | Supply and Fixing in repair 15 Watt warm white LED Downlighter 3000K Recess Mounting made out of Thermally conductive engineering plastic finished in white color having inbuilt driver , high translucent frosted optically diffuser, glare free light, Square / Round Shape and yellow Color (As per siteRequirement) having lumen output of 1800 Lumens including connecting up with twin core twisted flexible copper conductor cable with suitable size including disconnected & taking down old unserviceable light complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender