Tender For Repair/Comprehensive Maintenance Of Otm Accn At Bh Jco Mess, 71 Bde Sugn Coy, Awwa Office, Surya Sainik Aramgrah And Adjoining Areas Under Ge (West) Lucknow
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
16 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Comprehensive Maintenance Of Otm Accn At Bh Jco Mess, 71 Bde Sugn Coy, Awwa Office, Surya Sainik Aramgrah And Adjoining Areas Under Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | M & L brickwork with fly ash bricks,Modular bricks straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc compete all as specified and directed. |
| 2 | M & L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar compete all as specified and directed. |
| 3 | M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and plastering the wall surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish compete all as specified and directed. |
| 4 | M&L for repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish compete all as specified and directed. |
| 5 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of Priming compete all as specified and directed. |
| 6 | M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed. |
| 7 | M & L preparation of new surfaces of of ceiling and applying two coats of white wash on ceiling complete all as specified and directed. |
| 8 | M & L 1 mm thick wall care putty on wall in two coats and smooth finished by sanding with mechanical sander complete all as specified and directed |
| 9 | Material & Labour for complete removal of existing treatment of walls preparation of old plastered surfaces of finished walls and applying Two coats of 100% Premium acrylic emulsion paint with PU serum, colour stay technology having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical means |
| 10 | M&L for preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent slats and trading oil and greasy spot and applying one coat of cement base paint over a coat of primer on walls , rate include up to 2 stories compete all as specified and directed. |
| 11 | M & L for preparation of old treated surface of wall and applying two coats of whitewash incl cleaning the old surface and removing the dust from the wall compete all as specified and directed. |
| 12 | M & L for preparation of old treated surface of ceiling and applying one coat of whitewash incl cleaning the old surface and removing the dust from the ceiling compete all as specified and directed. |
| 13 | M & L for preparation of old treated surface of wall and applying one coats of oil bound distemper incl cleaning the old surface and removing the dust from the wall compete all as specified and directed. |
| 14 | M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper incl cleaning the old surface and removing the dust from the wall compete all as specified and directed. |
| 15 | M & L for preparation of old treated surface of ceiling and applying one coat of oil bound distemper incl cleaning the old surface and removing the dust from the wall compete all as specified and directed. |
| 16 | M & L for preparation of old surfaces on wall surfaces and applying two coats of plastic emulsion paint incl cleaning the old surface and removing the dust from the wall compete all as specified and directed. |
| 17 | M&L for applying two coats of cement based paint incl cleaning the old surface and removing the dust from the wall compete all as specified and directed. |
| 18 | M & L for preparation of old wooden or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint compete all as specified and directed. |
| 19 | M & L for preparation of new wooden or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer compete all as specified and directed. |
| 20 | M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint compete all as specified and directed. |
| 21 | M & L for prepration of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over and incl a coat of red oxide primer compete all as specified and directed. |
| 22 | M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151, two parts of cement by weight complete all as specified and directed. |
| 23 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 24 | M & L for premium quality joint free ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 25 | M & L for premium quality joint free ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding layer in cement mortar 1:3 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 26 | M & L for joint free glazed coloured GLOSSY tiles, superior quality of size 300 x 450 x 7 to 8mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 27 | M & L machine Cut Kota stone slab flooring 20-25mm thick over and including 20 mm thick screed bed in cement mortar 1:6 laid and bedded jointed cement slurry mixed with pigment to match to shade of the slab including grinding, mirror polishing and including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 28 | M & L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone compete all as specified and directed. |
| 29 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 20mm th in cement mortar 1:4 and including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 30 | M & L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement including demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level compete all as specified and directed. |
| 31 | M & L for 50mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long, including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed. |
| 32 | Demolition of PCC (un-reinforced) in ground floors and pavings not exc. 15 cm thickness below or above ground levels complete all as specified and directed. |
| 33 | M & L hard core of broken stone gauage not exc 63 mm deposited spread and levelled n.exc 15 cm thick watered and rolled /rammed to a true surface compete all as specified and directed. |
| 34 | M & L cement concrete 75 mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate compete all as specified and directed. |
| 35 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand including dismantling stone & tiles of any description complete all as specified and directed. |
| 36 | M & L for 400x400x20-25mm thick Exterior grade Heavy duty tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment over and including 15 mm thick screed bed in CM 1:4 incl Dismantling stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 37 | M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 38 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified & directed. |
| 39 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.00 Sqm each complete all as specified & directed. |
| 40 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and and removal from site compete all as specified and directed. |
| 41 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed. |
| 42 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 43 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 44 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws compete all as specified and directed. |
| 45 | M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 46 | S & F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid glazed and skelton door shutter open rebated,prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws compete all as specified and directed.Note: Butt hinges shall be paid separately. |
| 47 | S & F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat complete all as specified & directed. |
| 48 | S & F stainless steel butt hinges 100mm size medium weight and fixed complete all as specified and directed. |
| 49 | S&F 250 mm Stainless steel ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed compete all as specified and directed. |
| 50 | S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 51 | S & F Stainless Steel Bow handle matte finish fabricated type 150mm long compete all as specified and directed. |
| 52 | S & F mild steel helical door spring 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 53 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. |
| 54 | S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. |
| 55 | Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. (Rate of Glass shall be included with rate of window) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 56 | Supply and Fixing powder coated (thickness of powder coating shall not be less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) compete all as specified and directed. |
| 57 | Supply and Fixing powder coated (thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc compete all as specified and directed. |
| 58 | S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed. |
| 59 | S & F continuous (Piano) hinges mild steel bright finished or electo galvanised, with width of flap 30 mm when open,and fixed with screws complete all as specified and directed. |
| 60 | S & F 100 mm long aluminium anodised, haps and staple, safety type with steel hinges pin including bolts to hinge plate and fixed with srews complete all as specified and directed. |
| 61 | S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 62 | S & F ball catcher with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters compete all as specified and directed. |
| 63 | M & L for Welding in repairs n. exc 2.5 cm in length, thickness of metal to be welded n. exc 6mm complete all as specified and directed. |
| 64 | S & F in repair mortice lock 2 levers aluminium, vertical type, size 100 mm complete all as specified and directed. |
| 65 | S & F in repair aluminium (die cast) body door closer hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 66 | S & F in repair two (double) legged floor door stopper of aluminum body & tougues anodess with hard drawer steel spring fixed in floor of over all length of cover plate 140mm complete all as specified and directed.. |
| 67 | Supply and fixing in repairs stainless steel peg set (06 Nos hook) etc complete all as specified and directed. |
| 68 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips compete all as specified and directed. |
| 69 | S & F Sheet glass 4mm thick ordinary quality and glazing with rubber bedding etc in suqares n exc 0.5 Sqm in each pane compete all as specified and directed. |
| 70 | S & F 4 mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan complete all as specified and directed. |
| 71 | S & F 2nd class hard wood Plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads in area not exc 3 Sqm CM complete all as specified and directed. |
| 72 | S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed. |
| 73 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 74 | M & L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings & Fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed. |
| 75 | M & L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings & Fixed complete to walls and ceilings or laid in floors. including taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed. |
| 76 | M & L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 77 | S & F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor complete all as specified and directed. |
| 78 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe complete all as specified and directed |
| 79 | S & F in repair vitreous china Wash hand basin flat back type of size 550x400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.(excluding tap, waste chain & plug) complete all as specified and directed. |
| 80 | S & F in repair Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe 32 mm dia and Waste coupling of PTMT any colour half of full threaded suitable for 32 mm dize discharge pipe complete all as specified and directed.. |
| 81 | S & F in repair 10 ltrs capacity PVC valveless syphonic double action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 82 | S & F in repair PVC Syphon Kit with complete fittings for low level flushing cistern complete all as specified and directed. |
| 83 | S & F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed. |
| 84 | S & F in repair for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or butterfly handle compete all as specified and directed. |
| 85 | S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe compete all as specified and directed. |
| 86 | S & F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 87 | S & F in repair fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks & Flynuts, screwed for iron pipes & fixed for 15mm dia complete all as specified and directed. |
| 88 | S & F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed. |
| 89 | S & F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with round spout with waste system , including plugging and fixed, suitable of 15 mm bore pipe compete all as specified and directed. |
| 90 | S & F in repair wall mixer L-bend type with connecting legs and wall flanges, fancy type brass chromium plated, with closted swinging spout including plugging and securing to walls suitable for 15 mm bore pipe compete all as specified and directed. |
| 91 | S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 92 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets compete all as specified and directed. |
| 93 | S & F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges compete all as specified and directed. |
| 94 | S & F in repair Brass spindle for Bib cock/stop cock fancy type bib taps/stop cock complete all as specified and directed. |
| 95 | S & F in repair Brass spindle for concealed stop cock, wall mixer, WHB mixture complete all as specified and directed. |
| 96 | S & F 500 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete all as specified and directed. |
| 97 | S & F 1000 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc complete all as specified and directed. |
| 98 | S & F in repair of E-board 'Everest' or equivalent make 600 x 600 x 4mm thick white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc. compete all as specified and directed. |
| 99 | S&F in repair 5 mm thick hollow PVC Wall panelling including PVC beading at corner and top of any design, fixed on wall as per manufacture instruction complete all as specified and directed. |
| 100 | S & F 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed. |
| 101 | S & F in repair 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 102 | S & F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 103 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed. |
| 104 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed. |
| 105 | S & F in repair 600x450x5mm thick bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood or PVC sheet and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 106 | S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed. |
| 107 | S & F in repair Toilet paper holder, CP box type complete all as specified and directed. |
| 108 | S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall compete all as specified and directed. |
| 109 | S & F in repairs PVC connections 600mm long, 15 mm size with brass chromium plated nuts at ends complete fixed complete all as specified and directed. |
| 110 | S & F in repair PVC flexible waste Pipe, 32 mm bore for WHB /Sink complete all as specified and directed. |
| 111 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connectionS & Fixed in position as specified superior quality complete all as specified and directed. |
| 112 | S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe compete all as specified and directed. |
| 113 | Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litres and write date of cleaning and due date of cleaning on OHT compete all as specified and directed. |
| 114 | Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. |
| 115 | S & F in repair for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and directed. |
| 116 | S & F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe - 410- W(Gde - E 250 quality B) including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 117 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening compete all as specified and directed. |
| 118 | S & F 12mm thick toughened glass as in hinged doors, fixed partitions, automatic doors and similar work including cutting to shape, drilling holes required including scaffolding (if required) upto double storeyed height complete all as specified and directed. |
| 119 | S & F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers compete all as specified and directed. |
| 120 | Dismantling brick tiles or terracing tiles, single layer of roofs including demolition and removing of mud in roofs any thickness including plastering and leeping (whether full thickness removed or part thereof ) and demolition material disposed out from MoD land and including roughening surfaces of old concrete by picking, sweeping/Brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0kg of cement per sq. metre compete all as specified and directed. |
| 121 | M & L PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in roof kerbs/roof padding /benching or mud stops, and platform for mounting service tanks, rounded, chamfered on edges including necessary use and waste of from work etc complete all as specified and directed Please Enable Macros to View BoQ information |
| 122 | M & L PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in roof kerbs/roof padding /benching or mud stops, and platform for mounting service tanks, rounded, chamfered on edges including necessary use and waste of from work etc complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender