Tender For Provn Of 02 X Toilet Block, 2 X Bathroom Alongwith Connected Sanitary Fitting System At Pine Bakery Of 509 Asc Bn Under Age B/R-Iii And Age E/M-Ii Of Ge (South) Meerut Cantt.
Tender Value
4.79 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
10 days left
EMD
9600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 02 X Toilet Block, 2 X Bathroom Alongwith Connected Sanitary Fitting System At Pine Bakery Of 509 Asc Bn Under Age B/R-Iii And Age E/M-Ii Of Ge (South) Meerut Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | M&L Cement concrete in foundations, filling and mass, type D-2 1:4:8 using (40 mm graded stone agg) complete all as specified and directed. |
| 3 | M&L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 4 | M&L Brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed. |
| 5 | Use and wastage of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 6 | Use and wastage of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed. |
| 7 | M&L, TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 8 | Ditto, all as per item No 08 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 9 | M&L Reinforced cement concrete (nominal mix),Type B1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 10 | M&L Reinforced cement concrete (nominal mix),Type B1 1:2:4 (20mm graded aggregate) in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 11 | M&L, Rendering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without usingextra lime or cement) in cm (1:6) complete all as specified and directed |
| 12 | M&L, Rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without usingextra lime or cement) in cm (1:4) complete all as specified and directed |
| 13 | M&L, Rendering 5mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without usingextra lime or cement) in cm (1:4) complete all as specified and directed |
| 14 | M&L Preparation of New plastered or unplastered surfaces of wall and applying 0.5mm to 2mm thick wall care putty, making the surface smooth and applying two coat of oil emulsion distemper using roller complete all as specified & directed. |
| 15 | M&L Preparation of New plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed. |
| 16 | M&L Preparation of New plastered or unplastered surfaces of ceiling and applying two coat of white wash paint complete all as specified and directed. |
| 17 | M&L, Hardcore of brocken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 18 | M&L, 75mm thick, Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in subbase complete all as specified and directed |
| 19 | Material & labour non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed. |
| 20 | Material & labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed. |
| 21 | S&F 15mm bore, Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed. |
| 22 | All as per item No. 21.00 here-in-before but 20 mm bore pipe. |
| 23 | S&F, 16 mm (outer dia), 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 24 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes, 20mm dia gate valve, etc complete all as specified and directed. |
| 25 | S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 26 | Supply and fixing 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed. |
| 27 | Supply and fixing 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. |
| 28 | Supply and fixing 15mm bore stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed. |
| 29 | Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed. |
| 30 | S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 55 cm long between flanges. complete all as specified and directed. |
| 31 | S&F stainless 3mm thick soap dish/plate of size 300 x 100mm, with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush complete all as specified and directed. |
| 32 | Supply and fixing PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed. |
| 33 | Supply and fixing vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and directed. |
| 34 | Supply and fixing vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and bracketscomplete all as specified and directed. |
| 35 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil. complete all as specified and directed. |
| 36 | Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point, complete all as specified and directed. |
| 37 | M&L, 75mm thick, Cement concrete type C2, 1:3:6 (40mm graded aggregate) as in plinth protection, laid in alternate bays and finished cement concrete even and smooth without using extra cemnt, complete all as specified and directed |
| 38 | Supply and fixing looking mirror 600x450 mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed. |
| 39 | M&L, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 40 | M&L, PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed |
| 41 | S&F, 110mm dia, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 42 | All as per item No 41 above but 75mm dia bore pipe complete all as specified and directed. |
| 43 | S&F, 75mm dia, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixing to wall complete all as specified and directed. |
| 44 | S&F, 75mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 45 | Suply and fix 75mm bore PVC (SWR) bends any redious complete all as specified and directed. |
| 46 | Supply & fix 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 47 | Suply and fix 110mm bore PVC (SWR) bends any redious complete all as specified and directed. |
| 48 | Supply & fix 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 49 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing including stainless steel butt hinges 03 Nos size 100mm, tower bolt aluminium 02 Nos size 150mm long, aluminium alloy handles D type size 150mm 02 Nos for each door complete all as specified and directed.Note:- stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 50 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including 03 Nos SS butt hinges 100mm, 02 Nos aluminium tower bolt 150mm in each door complete all as specified and directed. |
| 51 | S&F, Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 52 | Cutting, Screwing existing steel tubing for alterations or additions for pipe bore 40-50mm in positionwithout taking down complete all as specified and directed. |
| 53 | Supply & fix 25 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 54 | Material & labour for point wiring with FRLS PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in and including PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for one Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps. the followings :- (a) One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps. |
| 55 | All as per item No 54.00 here-in-before but One ceiling fan/exhaust fan point controlled by one, one way switch 05 / 06 Amps. |
| 56 | All as per item No 54.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 57 | All as per item No 54.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 58 | Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed. |
| 59 | Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed. |
| 60 | Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed. |
| 61 | Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed. . |
| 62 | Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed. |
| 63 | Supply and fix decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed. |
| 64 | Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt. complete all as specified and directed. |
| 65 | Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified and directed. |
| 66 | Supply and fixing exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete all as specified and directed. |
| 67 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8way, with 200 Amps rated . complete all as specified and directed. |
| 68 | Supply & fixing MCB SPN, AC, 240 volts of 40 Amps, C curve, 10 kA, complete all as specified and directed. |
| 69 | Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed. |
| 70 | Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including making connections complete with bracket fitting made out of GI pipe medium grade including clampsand nuts and bolts. complete all as specified and directed. |
| 71 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty. complete all as specified and directed. |
| 72 | Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 73 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified and directed. |
| 74 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 75 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed. |
| 76 | Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender