Tender For Repair, Resurfacing Of Roads, Replacement Of Road Furniture And Allied Works At Various Locations At Chh Sambhajinagar Mil Station Under Ge(S) Ahilyanagar
Tender Value
60 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
25 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Resurfacing Of Roads, Replacement Of Road Furniture And Allied Works At Various Locations At Chh Sambhajinagar Mil Station Under Ge(S) Ahilyanagar
BOQ
| Sl. No. | Item Description |
| 1 | M&L Repair to potholes any depth, not exc 1sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed. |
| 2 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm, exc 50mm and n.exc 100 mm deep complete all as specified and as directed. |
| 3 | M&L for 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1OOKN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 |
| 4 | M &L preparing unsurfaced WBM/WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate of application of 8.5 kg/ 10 sqm on surface on WMMIWBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed. |
| 5 | M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber (consolidated thicknes 75mm or less) with binder content ( paving bitumen of VG-30 grade bitumen ) of min 4 % by weight of total mix complete all as specified and as directed. |
| 6 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) confirming to IS: 8887 at a rate application of 2.50 Kg / 10 Sqm on bituminious surface as specified in table 500-5 of MORTH Specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface complete all as specified and as directed. |
| 7 | M&L for premixed bituminous semi - dense asphaltic concrete 30mm consolidated thickness laid using mechanical paver for any width of road with min 5.00 % binder content paving bitumen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. |
| 8 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed. |
| 9 | M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.0 mm thick single coat as a centre line or edge line etc, road marking n exc 100 mm width using thermo plastic paint (Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be confirming to BS-6086 of most specification including spraying of glass beads etc complete all as per manufacturer's instructions and complete as all specified and directed. |
| 10 | Supply and fixing in repair cat eye solar reflective type of size 100mm x 100mm x 18mm with PAMA striplens relector fixed with and incl MS stud of suitable size as per manufacturers instructions. Make : DA 978 of Darkeye or techno commercial equivalent model of makes specified and as approved by GE |
| 11 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 12 | Supply and fix in repair solar cat eye alumnium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 1,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make: 3M/Green lite or techno commercial equivalent model of makes specified and as approved by GE |
| 13 | S&F for road side convex mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts), ISO Certified 9001:2015, of size 800mm dia, made up of polycabronate, mounted on MS pipe of 2.1m long and dia of pipe is 80mm including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earthwork in any type of soil for fixing and embedding the MS pipe on ground with hold fasting using PCC (1:2:4) type B1 using 20mm graded aggregates (block size 0.3m x 0.3 m x 0.45m below GL) and proper grounting, complete all as specified and directed by the Engr-in-Charge. |
| 14 | S&F in repairs speed bump/breaker ABS material yellow and black colour parabolic convex shape moulded of size 730x245x70mm made of steady plastic dovatail interlocking sub units jointed and fixed to make bump perfectly uniform,bump made of precoloured material (Black/Yellow) and UV stabilisers to keep them perfectly colourful studded with reflectors on either side to make clearly visible to motorist during night hours incuding fixing as per manufacturers directions complete all as specified and directed. Make: 3M or techno commercial equivalent model of makes specified and as approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender