Tender For Provn Of Guard Room With Allied Facilities And Connected Services At Jla Under Ge (West) Bareilly
Tender Value
38.67 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
16 days left
EMD
77340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Guard Room With Allied Facilities And Connected Services At Jla Under Ge (West) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: PROVN OF GUARD ROOM WITH ALLIED FACILITIES AND CONNECTED SERVICES AT JLA UNDER GE (WEST) BAREILLY Contract No : CWE / BLY / GE(W) /53 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavating in Trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc or for shafts,wells, cesspits, manholes etc not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and as directed. |
| 4 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed n. exc 1.50 M above the starting point in soil complete all as specified and as directed. |
| 5 | M&L for PCC bed (1:4:8) type D-2 (40 mm stone agg) Cement concrete in in foundations, filling and mass concrete etc all as directed by Engr-in-Charge |
| 6 | M&L for Reinforced Cement Concrete (Design Mix M-25) (using 20mm graded aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and directed |
| 7 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 8 | M&L for Reinforced Cement Concrete (Design Mix M-25) (using 20mm graded aggregate Columns, pillars, piers, posts and strutscomplete all as specified and directed |
| 9 | Formwork to sides of pillars, posts, struts, piers, columns with fair finished surfaces and stanchions complete all as specified and directed |
| 10 | M&L for Reinforced Cement Concrete (Design Mix M-25) (using 20mm graded aggregate Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and directed |
| 11 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed |
| 12 | M&L for Reinforced Cement Concrete (Design Mix M-25) Type B1 (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 14 | M&L for Reinforced Cement Concrete (Design Mix M-25) (using 20mm graded aggregate Chajja, complete all as specified and directed |
| 15 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed |
| 16 | M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed. |
| 17 | M&L for Post Construction Anti TermiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed. |
| 18 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns ,footings , slabs hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 19 | All as per item No 17 but 8 to 10 mm dia as in stirrups, spaces and binders |
| 20 | M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 21 | M&L brick work with fly ash old size bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) all as spd and directed |
| 22 | M&L for 20 mm thick Damp proof course in cement motar 1:2 to horizontal or vertical surfaces including necessary formwork |
| 23 | M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified |
| 24 | M&L rendering 12 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces of wall of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC @ 200 ml per 50 kg of cement, surface even and smooth without using extra cement and necessary scaffolding all as spd and directed,Note :- WPC shall not be paid separately for this item. |
| 26 | M&L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) surface even and smooth without using extra cement and necessary scaffolding all as spd and directed |
| 27 | M&L applying two coat of distemper oil emulsion (with airless electric spayer) white or tinted over 1 mm thick putty on newly decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. |
| 28 | M&L applying two coat of distemper oil emulsion (with airless electric spayer) white or tinted on 1 mm thick putty newly decorated or undecorated ceiling, soffits of slab surfaces including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. |
| 29 | M&L for two coats of weather proof paint over two coats of exterior primer on 1 mm thick putty complete all as specified and directed by Engr-in-charge |
| 30 | M&L for Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm and not exceeding 0.38 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed. |
| 31 | M&L for Ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exec 0.16 sqm and not exceeding 0.36 sqm as in vertical surfaces and screed bed / rendering and provn of rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed. |
| 32 | M&L for Glazed (plain /coloured) ceramic tiles wall 300x600x7mm thick on vertical faces of walls including 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match complete all as specified. |
| 33 | M&L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes all as specified. |
| 34 | S&F 18-20 mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in riser & steps, cills, wHB platforms and like jointed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed . |
| 35 | M&L moorum/ red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering all as specified and directed. |
| 36 | M&L for broken stone or boulders or hard core gauge n.exc 63mm , deposited spread and levelled in layers n exc 15cm thickness and rammed to a true surfaces complete all as specified & as directed. |
| 37 | M&L for 100 mm thick PCC 1:4:8 type D 2 as in sub base under floors complete all as specified and as directed. |
| 38 | M&L for 75 mm thick PCC 1:3:6 type C 2 (using 40 mm garded aggregate) as in plinth protection complete all as specified and as directed. |
| 39 | S&F for 125x60mmx2mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specified and directed. |
| 40 | S&F for 105x60mmx2mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete all as spd and directed. |
| 41 | S&F for 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed. |
| 42 | M&L for 35mm thick Factory made plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed. Note:- Campsule Mess will be measured and paid separately. |
| 43 | S&F for 1.2 mm thick aluminum anodised campsule mesh aperture not more than 1 cm fixing with screw in the door for protection of mosquito wire mesh and all as spd and directed. |
| 44 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 45 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per manufacturers instructions and as directed by Engineer-in-Charge. |
| 46 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge. |
| 47 | S&F steel windows/Ventilator with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC in frame deemed to be included in quoted rates.(iii) Glass and wiremess shall not be measured and paid seperatly under relevant item of schedule (iv) MS grill shall be measured and paid seperatly under relevant item of schedule |
| 48 | S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed . |
| 49 | S&F for 100mm long stainless steel butt hinges complete all as specified and directed. |
| 50 | S&F for 200 mm long aluminum anodised, barrel tower bolts of extruded section and fixed. |
| 51 | S&F for 200mm long Extruded aluminium alloy handles, fabricated type, anodised |
| 52 | S&F 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedmild steel all as spd and directed. |
| 53 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 54 | M&L for preparation of new untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with \\"P\\"or \\"S\\" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. |
| 56 | S&F PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. |
| 57 | S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. |
| 58 | S&F450mm long PVC connection 15mm bore with PTMT nuts. |
| 59 | S&F 100mmx100mm stainless steel grating fixed |
| 60 | S&F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement, including all fittings cistern, brackets, flush pipe, spreader, push tap, waste coupling, grating, etc Complete set incl all fitting & fixtures as specified and directed. |
| 61 | S&F fancy type stainless steel towel rail size 600mm long including a pair of brass bracket complete all as specified and directed. |
| 62 | S&F Vitreous china counter sunk wash basin, white, oval shape excluding ditto but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe |
| 63 | S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. |
| 64 | S&F designed looking mirror area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 65 | S&F of PVC corner set of three of size (12'X12\\" ,9\\"X9\\" and 6\\" X6\\" ) with railling and complete all as specified and directed. |
| 66 | S&F in repairs stainles steel Curtain Rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod all as directed and specified. |
| 67 | S&F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed. |
| 68 | S&F PVC (SWR) 110 mm bore bends all as specified or as directed. |
| 69 | S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed. |
| 70 | S&F spun iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified |
| 71 | S&F 75 mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door |
| 72 | S&F in repairs 75 mm bore PVC cowl complete all as specified. |
| 73 | S&F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed. |
| 74 | M&L 15 mm thick rendering in cement mortar 1:3 on roof top using water proofing compound on RCC roof surfaces complete all as specified and directed. |
| 75 | Supply & providing water proofing treatment with polymeric standard water proofing membrane having 10 years guarantee for water tightness all as specified and described as under:-(a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacturer's specification complete all as specified and directed.(b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends as required thereof, complete all as specified & directed. |
| 76 | M&L for applying two coat of Aluminium paint over a APP membrane surface of any description not otherwise described over 10 cm width or girth as specified and directed |
| 77 | S&F chlorinated Polyethylene Chloride (CPVC) pipes 32 mm outside dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 78 | S&F chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 79 | S&F fancy type 15 mm bore brass chromium plated bib tap long body screwed down for iron pipe and fixed to WHB/sink complete all as specified and directed. |
| 80 | S&F 15 mm bore fancy type chromium plated brass pillar tap suitable for 15mm bore pipe with cast copper alloy screw down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 81 | S&F fancy type 100mm size brass CP shower rose for fixing 15 mm pipe with or without swivel joints with 45 degree bend with flange complete all as specified and as directed. |
| 82 | S&F 1000 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position and any description all as specified in SSR Part I |
| 83 | S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed. |
| 84 | S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 32 mm bore |
| 85 | S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 15mm bore |
| 86 | S&F Mild steel OHT cage, bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed. |
| 87 | M&L for sand cushion over PCC before laying interlocking tiles as specified and directed |
| 88 | M&L for rubber moulded glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade, machine pressed of pattern and colour as approved by GE all completed as specified and directed. |
| 89 | Surface excavation not exceeding 30 cm deep averaging 15 cm deep complete all as specified and directed by Engr-in-charge |
| 90 | M&L for 150 mm bore reinforced concrete pipes class N P-2, laid and jointed complete with collars layring over concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested all as specified and directed |
| 91 | M&L for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in channels/benching of manhole, laid to shape and slope and surfaces finished even and smooth using extra cement, complete including all form work etc all as specified and directed. |
| 92 | M&L for rendering 15 mm thick on fair faces of brick (internal faces of manholes ST in CM 1:4 mixed with water proofing compouind where ever required in proportion as per manufacturer\\"s instructions, including finishing the surfaces even & smooth without using extra cement. |
| 93 | Supply only integral water proofing compound (powder). |
| 94 | M&L for providing pre cast reinforced cemnent concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks covers including all form work and setting in CM 1:4 all as specified and shown on drgs. Note size as specied by engr-in- charge |
| 95 | M&L for brick work with fly ash old size brick in CM 1:4 straight or curved on plan exc 6 m mean radius |
| 96 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregrate) mass concrete as in coping, kerb complete all as spd as directed |
| 97 | Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1,smooth finished and reforming benching |
| 98 | Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:-(a) One light / fan/ exhaust fan point controlled by one switch. |
| 99 | (b) One 5 pin 5 Amp switch socket out let point on an independent board. |
| 100 | (c) One 5 pin 5 Amp socket out let point controlled by one switch on same board. |
| 101 | All as per item No 97 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified. |
| 102 | S&F Modular switch one way 06 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 103 | S&F Modular switch one way 16 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 104 | S&F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 105 | S&F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 106 | S&F Modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 107 | Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed. |
| 108 | S&F LED mirror light fitting of 1 x 10 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 109 | S&F LED mirror light fitting of 1 x 20 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 110 | Supply & Fixing security light fitting, LED type, 35 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. |
| 111 | M&L for sub main wiring with two single core 6.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6.0 sqmm (FRLS) and one run of 6.0 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 112 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 113 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. |
| 114 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by the Engr-in-Charge. |
| 115 | S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. |
| 116 | S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 117 | Supply and fix TPN DB -VTPN DB 4 way with provn of MCCB 160 Amps , 415 Volt, 3 Phase, 4 wire AC 50 Hz having aluminium Bas Bar phase and the neutral insulated with PVC sleeves, connected with appropriate size copper thimbles. |
| 118 | S&F MCCB Triple pole 100 Amps 415 Volt curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 119 | Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed. |
| 120 | Material & Labour for earthing complete with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified |
| 121 | Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm, 3.5 core. |
| 122 | M&L for sand cushioning laid in trenches for laying of LT UG cables complete |
| 123 | M&L for modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as spd and directed. |
| 124 | S&F GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG Cables laid to walls or in floors or along with poles etc complete all as spd and directed. |
| 125 | Supply and laying galvanised iron pipes of medium grade 20mm bore with ISI marked with all tube fittings (such as bend, elbows, tees, short pieces of medium grade, connectors, back nuts, caps , plugs and unions etc) laying in trenches/floor/ducts and also cutting pipes, screwing and for making forged bends on piping as required and complete |
| 126 | M&L for Cutting existing steel tubing 50mm bore for alterations or additions for inserting tees |
| 127 | S&F 20 mm bore dia Gun metal gate valve with Iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 128 | Supply and fix desert cooler electric driven (single phase), made out of MS sheet not less than 22 gauge body suitsabler to accommodate exhaust fan turbo force 450 mm sweep 1400 RPM with high speed, water tank not less than 100 litre capacity and water pump to meet the requirement as per capacity of desert cooler with all internal pipes heavy duty threaded PVC pipe including honey comb grass pad 03 (three) nos superior quality and front grill made out of non corrosive material with 02 Nos (switch piano type) 6 Amps for fan and water pump and 01 No regulator electronic type suitable for exhaust fan capacity and internal wiring done using 2.5 sqmm copper conductor and 01 No float valve 15mm size with aluminium rod and PVC float and all accessories as required and connect the water supply from existing source and installed the same over existing platform/stand complete all as specified and directed. |
| 129 | S&F mild steel work in trussed, purlins, crane gantries, rails and fastenings and bracket framing including distance pieces, cleats, nut bolts etc complete all as specified and directed. |
| 130 | Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having 40/80 ltr storage and nominal cooling capacity including inlet and out let pipe connections complete all as specified and directed Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender