Tender For Repair To Plastering, Brickwork, Flooring, Tiling, Plumbing, Internal Water Supply Sanitary Fittings, Joinery, Att, Wpt, Sheet, Walling, Ceiling, Periodical Services And Certain Misc Repair Etc To Md / Otm Accn Of 401 Rkt Regt & 324 Fd Wks
Tender Value
25 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
11 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Plastering, Brickwork, Flooring, Tiling, Plumbing, Internal Water Supply Sanitary Fittings, Joinery, Att, Wpt, Sheet, Walling, Ceiling, Periodical Services And Certain Misc Repair Etc To Md / Otm Accn Of 401 Rkt Regt & 324 Fd Wksp At Raspunja Mil C Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: REPAIR TO PLASTERING, BRICKWORK, FLOORING, TILING, PLUMBING, INTERNAL WATER SUPPLY SANITARY FITTINGS, JOINERY, ATT, WPT, SHEET, WALLING, CEILING, PERIODICAL SERVICES AND CERTAIN MISC REPAIR ETC TO MD / OTM ACCN OF 401 RKT REGT & 324 FD WKSP AT RASPUNJA MIL CAMP UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc upto 8 storey bldg complete all as specified and directed |
| 3 | M&L rendering 15mm thick in CM (1:4) in two layers (10mm thick in 1st layer and 5mm thick on top layer) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound as per manufacturer instruction complete upto 4 storey height all as specified and directed |
| 4 | All as per item No 2 above but 5 storey to 8 storey height |
| 5 | Supply only liquid water proofing compound as required |
| 6 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 7 | M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier \\"Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd\\" or \\"Hind Styrene BR of Hindcon Chemical Ltd\\" or equivalent of M/s Pidilite Industries /Icannano @ 7 Litre per bag of cement complete finished even and smooth without using extra cement complete upto 4 storey height all as specified and as per manufacturer's specification. |
| 8 | All as per item No 06 above but 5 storey to 8 storey height |
| 9 | M&L rendering 10mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces upto 4 storey height, complete all as specified and directed (upto 8 storey building) |
| 10 | All as per item No 8 above but 5 storey to 8 storey height |
| 11 | M&L rendering 5mm thick in CM (1:3) as in ceiling concrete surfaces complete upto 4 storey height all as specified and directed Note: (upto 8 storey building). |
| 12 | M&L for preparing of old existing treatment of old surfaces wall and applying one coat of oil bound distemper, oil emulsion, white or tinted including white cement base putty as per requirement to fill up cracks upto 8th storey complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment of old surfaces and applying two coats of oil bound distemper (any colour/tint) over a coat of primer (Asian Paint / Berger Paints) including a coat (approx 1.5mm thick) of white cement based putty complete all as directed and specified. |
| 14 | M&L Preparing of existing old surfaces and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed. |
| 15 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces upto 4th storey complete all as specified & directed. |
| 16 | M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer including a coat of white cement based putty (approx 1.5mm thick) including rubbing with emmery paper to make wall surface smooth and even upto 8th storey complete all as specified and directed. |
| 17 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) upto 8th storey complete all as specified & directed. |
| 18 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement upto 4th storey complete all as specified and directed |
| 19 | M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed. |
| 20 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 21 | M&L fly ash bricks pulverizes using class designtion 75 (kgf/cm2) bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified and directed. |
| 22 | All as item No 20 here in before but half brick thick brickwork built in CM 1:4 complete all as specified and directed |
| 23 | S & F in repair for chromium plated Health faucet with 15mm Dia, 1.25 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. |
| 24 | S & F in repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed. |
| 25 | Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, white colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 26 | S&F Aluminium body(extruded section) door closer hydraulically regulated, designation No 1, universal type suitable for door shutters of 700 mm in width and weight not more than 35Kg and fixed as in repair complete all as specified and as directed. |
| 27 | M&L in repairs, (PVC Syphon assembly (internal kit) for any type/size/make of low level flushing cistern,tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed. |
| 28 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed. |
| 29 | S & F in repair, brass chromium plated long body bib cock with Wall Flange for 15 mm bore pipe complete all as specified and directed. |
| 30 | S & F in repair, brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed. |
| 31 | S & F in repair brass chromium plated pillar tap fancy type screwed for 15 mm bore pipe complete all as specified and directed. |
| 32 | S & F in repair 15mm bore brass chromium plated Wall Mixer hot & cold water screwed down from iron pipe and fixed complete all as specified and directed. |
| 33 | S & F in repair for 15mm bore brass chromium plated Sink Mixer, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 34 | S & F in repair for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. Make : Essco (MQT-526KN) or equivalent from Hindware/Prayag |
| 35 | M&L for taking down of existing membrance and Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed. |
| 36 | Demolition of cement concrete (Un-reinforced) on roofs, floors (other than ground floor) berms, staircase, landing, chajjas and similar suspended work complete all as specified and directed |
| 37 | M&L for providing plain cement concrete (1:2:4) type B-0 (Using 12.50mm graded stone aggregate) as in padding and benching & filleting all as specified and directed. |
| 38 | M&L for 10mm thick screed bed or bedding over roof surfaces when concrete is still green with and including WPC in cement mortar 1:3 complete all as specified and directedNote :- WPC shall be measured paid separately |
| 39 | M&L for cutting down plants / trees of girth not exc 25 cm & area not exe 01Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine ) and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 complete all as per manufacturer instructions complete all as specified and as directed. |
| 40 | Dismentalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed |
| 41 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 42 | All as item No 40 herein before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed |
| 43 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. |
| 44 | All as item No 42 herein before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed |
| 45 | M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed |
| 46 | Dismantling of stone slab laid bedded and pointed in any mortar and tiles of any description or thickness in floors aprons etc including cement motor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 47 | M&L, in repair chequered cement concrete tiles 30cmx30cmx25mm set and jointed in in neat cement slurry in floor with grey pigment including screed bed 15mm thick with CM 1:6 complete all as specified and directed |
| 48 | Demolition of cement concrete (Un-reinforced) in floor and paving nexc 15cm thick above or below GL complete all as specified and directed |
| 49 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 50 | M&L Cement Concrete type D2(1:4:8) using 40mm graded crushed stone aggregate 75mm thick as in sub base of floor surface even and rough to receive the topping layer, complete all as specified and as directed. |
| 51 | M and L 18-20mm thick granite of any type tiles machine cut in skirting dado laid over cement screed bed 15mmthick in CM 1:3 beaded and jointed with grey cement slurry and jointed with white cement ement mortor (1:2) using marble dust with admixture to match with shade of granite complete all as Specified and directed Note: Cupboard shelves rubbed and polished in slab and including groove cutting around the wall and finishing with cement mortar/white cement the wall using dust with admixture to match with shade of granite |
| 52 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of sizes nexc 1.5 Sqm complete all as specified and directed. |
| 53 | All as item No. 51.00 above but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 54 | M&L for Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs,hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 55 | M&L for Pressed steel for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 56 | M&L for Pressed steel frames for cup board of size 60x40mm with one or more rebates including necessary fixing lugs, hold fasts and one coat of redoxide primer complete as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 57 | S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009. |
| 58 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 59 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane. |
| 60 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed |
| 61 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 62 | S&F MS Roof trusses (framed) , trussed , purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or Flat section) including distance pieces , cleats etc Fe-410W (Gde E-250Quality `A' complete all as specifed and directed. |
| 63 | S&F 1.00mm thick Mild steel plain black sheet in wall cladding steel gates and similar work cut to size holes punched including ground headed screws clout nails or reivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required |
| 64 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 65 | S&F brass 4 levers lock for cupboard, grade I, size 50 mm as in repair complete all as specified and as directed. |
| 66 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 67 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 68 | S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed |
| 69 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed |
| 70 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed |
| 71 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 72 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed |
| 73 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed. |
| 74 | M&L 1.50mm thick powder coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles , anodised aluminium snap beading screws etc.including Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm, required accessoreis and 4.80mm thick tinted glass, pin head type and glazing Complete all as specified and as directed.Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. |
| 75 | M&L Petty Repairs to any type of Aluminium Doors, AluminiumWindows, Aluminium Ventilators, Aluminium Louvers, Aluminium CB shutters etc of any description, in any situation by taking down & refixing shutter including replacement of rubber neoprene packing, aluminum snap beading, screws & tightening, adjustment etc ,making smooth functioning (proper closing, opening) etc with entire satisfaction of Engineer-in-charge complete all as specified and directed. |
| 76 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified. |
| 77 | S&F, in repair sink made of Stainless Steel l.0mm thick Overall size 495mm x 420mm and Bowl size 410 mm x 330 mm x 160 mm for Kitchen with Plugs, Washers, including bedding in cement motor or fixing cantilever bracket and connecting union to pipe,complete all as specified and as directed. |
| 78 | S&F in repair for Towel rail 600mm long chromium plated fixed with screws complete all as specified and directed. |
| 79 | S&F, in repair MDF board thick 18/19mm, exterior grade, pre laminated balancing with lamination, fixed with screws to timber frame work and cup board complete all as specified and directed |
| 80 | M&L for Anti Termite Treatment alongwith external perimeter of building at the rate os 2.25 litre of emulsion per meter of perimeter complete all as specified and directed |
| 81 | M&L Anti Treatment at point of contact of wood work by chemical emulsion (in oil or kerosene based solution)@ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and directed |
| 82 | M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 83 | M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified. |
| 84 | M&L for preparation of old surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified. |
| 85 | M&L for preparation of old surfaces of steel or steel based materials of any description and applying two coats of synthetic enamel paint complete all as specified. |
| 86 | Taking down eaves gutters and rain water pipe (any size or pattern) including all fittings, heads, shoes, bens, swan necks etc including cleaning or refixing or removal to store (measuresed overall as fixed along the centre line over fittings and accessories complete all as specified and directed |
| 87 | S&F in repair for 75mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 88 | S&F in repair UPVC (SWR) 75mm bore bend with access door complete all as specified and directed. |
| 89 | S&F in repair UPVC (SWR) junction single (single T) equal or unequal 75mm bore with access door complete all as specified and directed. |
| 90 | S&F in repair for 110mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 91 | S&F in repair UPVC (SWR) bend any radius 110mm bore complete all as specified and directed |
| 92 | S&F in repair UPVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 93 | S&F for Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 75mm to 150mm complete all as specified and directedNote:- (i) Unit rate quoted by tenderer shall include for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to eight storeys height of bldgs. |
| 94 | Taking up or down steel tubing 20mm dia and connection complete all as specified and directed Note: including cleaning for re-fixing or remove to stores. |
| 95 | Supplying and laying for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 96 | Taking up or down steel tubing 25mm dia and connection complete all as specified and directed Note: including cleaning for re-fixing or remove to stores. |
| 97 | Supplying and laying for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 98 | M&L in repair for leaking water in brass/CP Wall Mixer, basin mixer, sink mixer of any make/ description/size in any position by replacing the brass spindle & washer, tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed |
| 99 | S&F in repair PVC connection 15mm size with PTMT nut of length 600mm complete all as specified and directed |
| 100 | Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed. |
| 101 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. |
| 102 | S&F, in repair, 5mm thick PVC sheet fillet of width 35mm for paneling inclusive of fixing on to wall to make PVC frame as per specified complete all as specified and directed |
| 103 | S&F 4mm thick suspended false ceiling HPSC pre-primered fibre cement non asbestous building board similar to E-board Classic placed in a grid of size size 605 mm x 605 with aluminium powder coated angle /channel/tee section duly suppended with 4mm dia GI hanger fixed with GI hook 4mm dia and faster as required at the site including two coat of oil bound distemper complete all as specified and as directed. |
| 104 | S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender