Tender For Maintenance And Repair To Joinery, Plubing, Tiling And Other Allied B/R Repair Works To Command Huts, Central Amenities, Offrs Md Accn And Other Areas At Or Near Mall Road, Polo Raod, Caseel Road, Parade Road, Mandir Marg Etc In The Aor Of
Tender Value
49.95 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
14 days left
EMD
99900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repair To Joinery, Plubing, Tiling And Other Allied B/R Repair Works To Command Huts, Central Amenities, Offrs Md Accn And Other Areas At Or Near Mall Road, Polo Raod, Caseel Road, Parade Road, Mandir Marg Etc In The Aor Of Age B/R-I Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed. |
| 4 | Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed. |
| 5 | S&F flush door shutter 30mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed. |
| 6 | S&F Factory made single extruded WPC solid door/window ceosetry winodws and other single or double frames chowkhat of size 65x125mm cpmprisingn of virgin PVC polymer of K value 58-60 suspension grade calcium carbonate and natural fibre wood powder/ rice husk/ wheat husk and non toxic additives (maximun toxicity index of 12 for 100gms fabricated with miter joints aftr applying PVC colvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl steenght of 2200 N FACE and 1100 N Edge minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resisitance to spread of flames of class A category with property of being termite/borer proof water/ moisture proof and fire retardant. |
| 7 | Providing and fixing water proof and fire retardant. WPC door shutter 35mm thick to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 8 | Providing and fixing factory made single extruded moulded WPC (Wood Polymer Composite) solid prelaminate type fly proof wire mess door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with 3 No stainless steel butt hinges in each shutter of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: wire mess shall be paid separately) |
| 9 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.00 Sqm to 2.50 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Note: The unit rate quoted by contractor include all other connected accessories, including 5mm glass and wire mesh Net Opening will be measured for payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 10 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door up to 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality inclduing 8mm toughened glass complete all as specified and directed by Engineer-in-Charge.Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 11 | S&F butt hinges Stainless steel medium weight cold rolled of size 100 mm and fixed to shutters, complete all as specified and as directed. |
| 12 | S & F 150 mm size stainless steel, handles complete all as specified and directed |
| 13 | S & F 150 mm size stainless steel barrel tower bolts and fixed complete all as specified and directed. |
| 14 | S & F 250 mm size Brass, sliding door bolt wit sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed and make as per approved make list and as approved by GE). |
| 15 | S & F in repair aluminium dia cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. |
| 16 | S & F Anodised aluminium frame for doors, windows, ventilators, partations, AC provision window frame with or without three track, three track window frame etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified (Note : Design and pattern for any type window/door/ventilator etc frame as required as approved by GE ) |
| 17 | S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Note : Glass / wiremesh/ partical board/ ACP board to be paid seperately etc) |
| 18 | S & F double action floor door spring heavy duty suitable to 1M wide shutter for each leaf, complete all as specified and as directed. |
| 19 | S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 Nos) suitable handle (1 No.) complete all as specified (Note : Glass / wiremesh etc any type paid separately) |
| 20 | S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated inner and outer frame for sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads, handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, hinges, handles, glass and wire mesh for panels complete all as specified and as directed. |
| 21 | M&L 12 mm thick white color GRG (Glass Fibre Reinforced Gypsum) Semi Perforated false Ceiling Tiles, Micro Tegular & Tegular edged, Size 595mm X 595mm, Fire Resistance BS-476-4:1970 (Certified), Humidity Resistance (RH) (Certified),including necessary GI frame/ GI T , cross , wall angle etc false ceiling grid (Ceiling Suspension System) in High Quality Zinc Coated Galvanized Iron with Pre Painted Hot Pressed White G I Coil. including centre to centre Hangers 6 mm dia. G.I. rod fully threaded (upto 1000mm long) fixed to roof slabs with galvanised M-6 desh fastener 50 mm long including galvanised MS L-type level adjuster 85 x 25 x 25 x 2 mm etc including taking down on existing ceiling completed all as specified and directed. (Make : - Diamond ceiling and equivalent as approved by GE) |
| 22 | S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T', channel or any section including screws, cleats ,fasteners, clips and all required accessories, hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of putty complete all as specified and directed. Please Enable Macros to View BoQ information |
| 23 | S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T', channel or any section including screws, cleats ,fasteners, clips and all required accessories, hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of putty complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender