Tender For Special Repair To Ahu Of Paed Ward/Psy Opd Of Mh At Mil Stn Jammu Under Ge Satwari
Tender Value
22.71 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
16 days left
EMD
46000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Ahu Of Paed Ward/Psy Opd Of Mh At Mil Stn Jammu Under Ge Satwari
BOQ
| Sl. No. | Item Description |
| 1 | Repair/Replacement of double skin Floor mounted Air Handling Unit with 25 mm thick PUF panel, pre filter section, SP 50mm, 6RD CHD & 2 RD heat coil, forward curved blower of capacity 11600 CFM, Fan model FDA-630, Fan Pulley dia 315 mm x 2A and motor pulley dia 125 mm/2A, Fan RPM 578, three phase motor 5.5 KW, four pole, 50 Hz complete all as specified and directed. |
| 2 | Repair/Replacement of double skin Ceiling mounted Air Handling Unit with 25 mm thick PUF panel, pre filter section, SP 50mm, 6RD CHD & 2 RD heat coil, forward curved blower of capacity 3270 CFM, Fan model KAT-9x9-S2, Fan Pulley dia 106 mm x 2A and motor pulley dia 100 mm/2A, Fan RPM 1364, three phase motor 2.2 KW, four pole, 50 Hz complete all as specified and directed. |
| 3 | Material and Labour for MS chilled water piping duly insulated with 25 mm thick nitrile sheet finally finished with glass colth and star bond complete all as specified and directed. |
| 4 | Material and Labour for 50 MMWG Pressure gauge iron complete with SS syphon, cock valve and MS socket all as specified and directed. |
| 5 | Material and Labour for stem type thermometer complete all as specified and directed. |
| 6 | Material and Labour for 50mm CI butterfly valve complete all as specified and directed. |
| 7 | Material and Labour for 80mm CI butterfly valve complete all as specified and directed. |
| 8 | Material and Labour for 3 way iron control valve complete with actuator and thermostat all as specified and directed. |
| 9 | Material and Labour for Flexible Canvas of existing size connection all as specified and directed. |
| 10 | Material and Labour for Ducting with PGI sheet for connection piece all as specified and directed. |
| 11 | Material and Labour for Acoustic insulation of duct with open cell nitrile sheet of 10 mm thick all as specified and directed. |
| 12 | Taking down and Refxing at same location, commissioning and testing of Old unsv AHU complete all as specified and directed. |
| 13 | Repair/replacement of Electrical panel of AHUs 415 volts AC, 3 phase 4 wire 50 Hz ,weather proof dust and vermin proof MS sheet iron thick powder coated and locking arrangement complete:(a) MCB TPN, 32 Amp , 10 KA,C type - 01 Nos(b) MCB TP, 32 Amp , 10 KA, C type - 01 Nos(c) MCB SP 6A, C Type - 01 Nos(d) Star Delta Timer - 01 Nos(e) Power Contactor MNX A1 - 03 Nos(f) Selector switch for OFF,Auto,Manual control -01 Nos(g) Analog type Ammeter including CTs and selector switch -1 No(h) Push type Start & Stop button &Indicator - 1 Set(j) Internal Wiring of Panel and addon blocks& Labour charges |
| 14 | Replacement of GI medium grade drain pipe of suitable size 25 mm dia all as specified and directed |
| 15 | Replacement of GI meadium grade drain pipe of suitable size 20 mm dia all as specified and directed |
| 16 | Material and Labour rendering 15mm thick in cement plaster 1:4 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 17 | Supply and fixing of 50x50x6mm Iron angle for AHU complete all as specified and directed by Engineer-in-charge |
| 18 | Material and Labour PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling/ mass concrete complete all as specified. |
| 19 | Material and Labour MS section as in main and cross beams, hip and jack rafters, purlins, columns where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates and similar items complete all as specified. |
| 20 | Material and Labour applying two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified. |
| 21 | Supply & fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified and directed. |
| 22 | Supply & fixing in replacement of V Belt No. A-26 for AHU. |
| 23 | Supply & fixing in replacement of V Belt No. A-61 for AHU. |
| 24 | Supply and fixing of HVAC Diffuser used in return air of central AC Plant of size 2'x2' feet, powder coated , Flush/Linear type, square in shape all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender