Tender For Repair / Maintenance Of Motorised Valve, Actuators, Control Cabling, Relay Sensors, Plcs, Lt Panels, Lt Switchgear Installed At Water Supply Installations And Other Connected Works Under Ge Belgaum
Tender Value
43 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
21 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Belagavi → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Motorised Valve, Actuators, Control Cabling, Relay Sensors, Plcs, Lt Panels, Lt Switchgear Installed At Water Supply Installations And Other Connected Works Under Ge Belgaum
BOQ
| Sl. No. | Item Description |
| 1 | S&F Single phase Preventor Model 1-VSP D2, Supply Voltage :100-120 / 220 - 240/380-440 V AC ± 20% 50/ 60 Hz, Output Contacts- 2 CO, Phase Sequence: Possible, with and including taking down old u/s single phase preventor, complete all as specified and as directed. |
| 2 | S&F Relay with base 4 C/O / 24 V DC, with and including taking down old u/s relay, complete all as specified and as directed. |
| 3 | S&F Relay with base 4 C/O / 240 Volts AC, with and including taking down old u/s relay, complete all as specified and as directed. |
| 4 | S&F LED Indicator lamps Colour (Red /yellow/Green), supply Voltage: 230Volt, with and including taking down old u/s lamps, complete all as specified and as directed. |
| 5 | S&F Analogue module for Programmable Logic Controller, Input voltage (±10%): 24VDC, 5mA, with and including taking down old u/s analogue module, complete all as specified and as directed. |
| 6 | S&F D/O module for Programmable Logic Controller, Input voltage (±10%): 24VDC, 5mA, with and including taking down old u/s D/O module, complete all as specified and as directed. |
| 7 | S&F D/I module for Programmable Logic Controller, Input voltage (±10%): 24VDC, 5mA, with and including taking down old u/s D/I module, complete all as specified and as directed. |
| 8 | S&F HMI for Programmable Logic Controller, Size:7'' RAM: 16 MB, Flash Memory:16 MB, with and including taking down old u/s HMI, complete all as specified and as directed. |
| 9 | S&F Push button with LED Indicator - 240 V A.C, colour / Red / yellow / Green, with and including taking down old u/s push button, complete all as specified and as directed. |
| 10 | S&F MCB TP 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, with and including taking out old unserviceable MCB, all as specified and directed. |
| 11 | S&F MCB SPN 40 to 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, with and including taking out old unserviceable MCB, all as specified and directed. |
| 12 | S&F Selector switch - 2Way, with and including taking down old u/s selector switch, complete all as specified and as directed. |
| 13 | S&F Selector switch - 3Way, with and including taking down old u/s selector switch, complete all as specified and as directed. |
| 14 | S&F SMPS AC Input Voltage: 170 ~ 270Volt, Stable Output Voltage (V DC): 24, Output Current (Amp): 5, Output Power (Watt): 120, with and including taking down old u/s SMPS of any type, complete all as specified and as directed. |
| 15 | S&F Current transducers / energy meters with inbult mod bus communication port, with and including taking down old u/s CTs of any type, complete all as specified and as directed. |
| 16 | S&F Surge Protection device suitable for 230Volts incoming supply, with and including taking down old u/s surge protection device of any type, complete all as specified and as directed. |
| 17 | Supply, Installation, Testing and Commissioning of Float type Point Level Sensor with Type: Magnetic, Magnet: Ring type, Switch: Reed Switch (Epoxy sealed), Connecting Cable: Teflon, with and including taking down old u/s point level sensor, complete all as specified and as directed. |
| 18 | Supply, Installation, Testing & Commissioning of Motor Actuated Butterfly Valve of size 100mm dia, consisting of Quarter turn single phase Actuator and Wafer type butterfly valve with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos. For open and close status, Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos. For open and close status Space Heater Mounting : Direct, with and including taking down old u/s sluice valve of any type, complete all as specified and as directed. |
| 19 | All as per Serial Item No. 18 here in before but for 150mm dia valve, complete all as specified. |
| 20 | All as per Serial Item No. 18 here in before but for 200mm dia valve, complete all as specified. |
| 21 | All as per Serial Item No.18 here in before but for 250mm dia valve, complete all as specified. |
| 22 | All as per Serial Item No. 118 here in before but for 300mm dia valve, complete all as specified. |
| 23 | S&F Capacitor for Actuator suitable for 50 / 65 / 80mm dia Motorized Butterfly Valve, with and including taking down old u/s capacitor of any type, complete all as specified. |
| 24 | S&F Resistor for Actuator suitable for 50 / 65 / 80mm dia Motorized Butterfly Valve, with and including taking down old u/s resistor of any type, complete all as specified. |
| 25 | S&F Limit switch for Actuator suitable for 50 / 65 / 80mm dia Motorized Butterfly Valve, with and including taking down old u/s Limit switch of any type, complete all as specified. |
| 26 | M&L for Fabrication works at site with MS pipe of size 100mm dia, 6mm thick, carefully cutting into pieces and welding work with suitable new flange on the both sides of maximum length of pipe 300mm, fixed with MS nut bolt, double washers etc., as required at site, complete all as specified and as directed. |
| 27 | M&L for Fabrication works at site with MS pipe of size 150mm dia, 6mm thick, carefully cutting into pieces and welding work with suitable new flange on the both sides of maximum length of pipe 300mm, fixed with MS nut bolt, double washers etc., as required at site, complete all as specified and as directed. |
| 28 | M&L for Fabrication works at site with MS pipe of size 200mm dia, 6mm thick, carefully cutting into pieces and welding work with suitable new flange on the both sides of maximum length of pipe 300mm, fixed with MS nut bolt, double washers etc., as required at site, complete all as specified and as directed. |
| 29 | M&L for Fabrication works at site with MS pipe of size 250mm dia, 6mm thick, carefully cutting into pieces and welding work with suitable new flange on the both sides of maximum length of pipe 300mm, fixed with MS nut bolt, double washers etc., as required at site, complete all as specified and as directed. |
| 30 | M&L for Fabrication works at site with MS pipe of size 300mm dia, 6mm thick, carefully cutting into pieces and welding work with suitable new flange on the both sides of maximum length of pipe 300mm, fixed with MS nut bolt, double washers etc., as required at site, complete all as specified and as directed. |
| 31 | S&F Electric motor suitable for actuator of 80mm bore dia, Input Voltage : 230 V AC, Out put watts: 90 to 250, Nominal Current: 0.5 to 1.2 A, Class of Insulation, Ambient Temperature: 45 degree, with and including taking down old u/s electric motor of any size, complete all as specified and as directed. |
| 32 | S&F Electric motor suitable for actuator of 100mm bore dia, Input Voltage : 230 V AC, Out put watts: 90 to 250, Nominal Current: 0.5 to 1.2 A, Class of Insulation, Ambient Temperature: 45 degree, with and including taking down old u/s electric motor of any size, complete all as specified and as directed. |
| 33 | S&F Electric motor suitable for actuator of 150mm bore dia, Input Voltage : 230 V AC, Out put watts: 90 to 250, Nominal Current: 0.5 to 1.2 A, Class of Insulation, Ambient Temperature: 45 degree, with and including taking down old u/s electric motor of any size, complete all as specified and as directed. |
| 34 | S&F Electric motor suitable for actuator of 200mm bore dia, Input Voltage : 230 V AC, Out put watts: 90 to 250, Nominal Current: 0.5 to 1.2 A, Class of Insulation, Ambient Temperature: 45 degree, with and including taking down old u/s electric motor of any size, complete all as specified and as directed. |
| 35 | S&F Electric motor suitable for actuator of 250mm bore dia, Input Voltage : 230 V AC, Out put watts: 90 to 250, Nominal Current: 0.5 to 1.2 A, Class of Insulation, Ambient Temperature: 45 degree, with and including taking down old u/s electric motor of any size, complete all as specified and as directed. |
| 36 | S&F Butterfly valve 80mm bore dia, Designed line pressure: 10 kg/sq cm, Operating Angle: 90 degrees, Disc Material: CI with nylon coating, with and including taking down old u/s butterfly valve, complete all as specified and as directed. |
| 37 | S&F Butterfly valve 100mm bore dia, Designed line pressure: 10 kg/sq cm, Operating Angle: 90 degrees, Disc Material: CI with nylon coating, with and including taking down old u/s butterfly valve, complete all as specified and as directed. |
| 38 | S&F Butterfly valve 150mm bore dia, Designed line pressure: 10 kg/sq cm, Operating Angle: 90 degrees, Disc Material: CI with nylon coating, with and including taking down old u/s butterfly valve, complete all as specified and as directed. |
| 39 | S&F Butterfly valve 200mm bore dia, Designed line pressure: 10 kg/sq cm, Operating Angle: 90 degrees, Disc Material: CI with nylon coating, with and including taking down old u/s butterfly valve, complete all as specified and as directed. |
| 40 | S&F Butterfly valve 250mm bore dia, Designed line pressure: 10 kg/sq cm, Operating Angle: 90 degrees, Disc Material: CI with nylon coating, with and including taking down old u/s butterfly valve, complete all as specified and as directed. |
| 41 | M&L for Removing all the automation components installed at Nagzeera Pump House (like motorized valves size 80mm qty 05, Pressure transmitter 05 qty, Priming valves 10qty) and re-install the same as required at site, with and including all shifting charges and re-commissioning of the removed items, complete all as directed by Engineer-In-Charge. |
| 42 | Supply, Installation, Testing & Commissioning of pressure transmitter, power pack for supply of DC, Power supply: 10-36 V DC, Process connection: G ½ “, Enclosure: whether proof IP 65, Process temperature: -30 to 120 celcius, with and including taking down old u/s pressure transmitter, complete all as specified and as directed. |
| 43 | Supply, Installation, Testing & Commissioning of solenoid / motorised valve suitable for 25mm GI pipe for priming of pump, including suitable bypass arrangement with necessary GI fittings of 25mm bore dia, for Pressure rating: 6 kg /sq. cm, with and including taking down old u/s solenoid valve, complete all as specified and as directed. |
| 44 | Supply, Installation, Testing & Commissioning of solenoid / motorised valve suitable for 10mm GI pipe for priming of pump, including suitable bypass arrangement with necessary GI fittings of 10mm bore dia, for Pressure rating: 6 kg /sq. cm, with and including taking down old u/s solenoid valve, complete all as specified and as directed. |
| 45 | Supply, Installing, Testing and Commissioning of Ultrasonic Level Transmitter, Range : 0-8 metres, Accuracy : 0.5 % minimum, Supply Voltage : 24V DC, Output : 4-20 mA, with and including taking down old u/s Ultrasonic Level Transmitter, complete all as specified and as directed. |
| 46 | S&F PVC FRLSH insulated, sheathed armoured copper conductor cable of size 2Core x 1.5Sqmm, multi stranded 1100Volt, drawn through pipe / fixed on wall, with and including taking down old u/s cable of any type, complete all as specified and as directed. |
| 47 | S&F PVC FRLSH insulated, sheathed armoured copper conductor cable of size 4Core x 1.5Sqmm, multi stranded 1100Volt, drawn through pipe / fixed on wall, with and including taking down old u/s cable of any type, complete all as specified and as directed. |
| 48 | S&F PVC FRLSH insulated, sheathed armoured copper conductor cable of size 6Core x 1.5Sqmm, multi stranded 1100Volt, drawn through pipe / fixed on wall, with and including taking down old u/s cable of any type, complete all as specified and as directed. |
| 49 | S&F PVC FRLSH insulated, sheathed armoured copper conductor cable of size 16Core x 1.5Sqmm, multi stranded 1100Volt, drawn through pipe / fixed on wall, with and including taking down old u/s cable of any type, complete all as specified and as directed. |
| 50 | S&F 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tank, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement, including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing, with and including taking down old u/s existing PVC/RCC water storage tank of any description from the existing staging/ Bldg after disconnecting and dismantling of all existing pipe line connections carefully all as specified and directed. |
| 51 | S&F IN REPAIR GI Cable Tray superior quality of size 150mm x 50mm,18 gauge thick, ISI marked, with and including all fixing arrangements as required at site, complete all as specified and as directed. |
| 52 | Supply and laying Double wall corrugated high density polymer (SDR 17) pipe 40mm dia, ISI marked, laid as in cable protection fixed to poles with and including necessary suitable MS clamps, bolts, nuts, washers, couplers, bends, end caps etc., laid in trenches/ roads crossings etc., with and including taking down old u/s pipe, complete all as specified and as directed. |
| 53 | S&F GM Gate valve of 25mm dia with iron wheel head/handle, screwed both ends for iron pipe of 25mm bore dia, with and including taking down old u/s gate valve, complete all as specified and as directed. |
| 54 | S&F Non Return Valve of 25mm dia screwed both ends for iron pipe of 25mm bore dia, with and including taking down old u/s NRV, complete all as specified and as directed. |
| 55 | Supply, laying, testing and commissioning of Galvanised steel water tubing 25mm bore, medium grade conforming to IS:1239 (Part I) including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc), laid in trenches/drains, including testing, with and including taking down old u/s GI pipe with fittings, complete all as specified and as directed. Note: Necessary earth work will be measured and paid separately. |
| 56 | S&F IN REPAIR Ball valve (minimum wt 455 gms) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe of 25mm bore dia, complete all as specified and as directed |
| 57 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep in any type of soil for foundation, laying pipe etc., or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out complete all as specified and directed. |
| 58 | Returning filling in any type of soil including spreading levelling watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. |
| 59 | Removing excavated material (Soils) to a distance not exceeding 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 60 | M&L for PCC 1:3:6 Type C1 (using 20mm graded stone aggregate) laid as in foundations /valve chamber filling, support of pipe laying and mass concrete etc., with and including demolition of old cement concrete of any description and in any position, all as specified and directed. |
| 61 | M&L for PCC type B0 [1:2:4] using 12.50mm graded granite stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, complete all as specified and as directed. |
| 62 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:4, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 63 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:4 finished even and fair without using extra cement, complete all as specified and as directed. |
| 64 | M&L for water testing with reference to IS:10500:2012 for the following locations every month as directed by Engineer-in-Charge, form Environmental Health and Safety Research and Development Centre or approved NABL Lab, with and including submitting the water testing certificates in original to Engr-in-Charge (triplicate) on or before the last working day of every month. (a) Lakmitek pump house (b) Parade ground road pump house (c) Nagzeera pump house (d) Fort Area. |
| 65 | M&L for water testing with reference to IS norms as per the direction of Engineer-in-Charge every month from Environmental Health and Safety Research and Development Centre or approved NABL Lab and including submitting the water testing certificate in original (triplicate) to Engr-in-Charge on or before the last working day of every month. (a) STP water before filtering (b) STP water after filtering. |
| 66 | S&F IN REPAIR Heavy duty swimming pool wall brush 24 inch / 2 feet, for cleaning side wall and floor of swimming pool made by aluminium back Nylon bristle, with and including adjustable type aluminium telescopic handle of size not less than 6m, complete all as specified and as directed. |
| 67 | S&F IN REPAIR Heavy duty Professional Swimming Pool Deep Leaf Net, plastic Body & Handle, standard Heavy Duty Pool Cleaning, with and including adjustable type aluminium telescopic handle of size not less than 6m, complete all as specified and as directed. |
| 68 | M&L for Developing & flushing the tube well with compressed air and thereafter with 25% extra capacity pump by pumping muddy water disposing off the same to a safe distance and till clear water flows out from tube well, complete all as specified and as directed. |
| 69 | M&L for for dismantling, disconnecting and shifting of split casing centrifugal pumps of 30 HP from its location carefully and reinstalling the same over the new platform and fixing with necessary anti vibration pads, as required at site, complete all as specified and as directed. |
| 70 | M&L for dismantling, disconnecting and shifting of automation panel from its location carefully and reinstalling the same over the new platform and fixing with necessary anti vibration pads as required at site, complete all as specified and as directed. |
| 71 | M&L for dismantling, disconnecting and shifting of LT panel from its location carefully and reinstalling the same over the new platform and fixing with necessary anti vibration pads as required at site, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 72 | M&L for dismantling, disconnecting and shifting of LT panel from its location carefully and reinstalling the same over the new platform and fixing with necessary anti vibration pads as required at site, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender