Tender For Certain Repairs To Flooring,Plastering, Joinery, Sanitary Fittings, Perioidcals And Internal Water Supply Incl Misc Repair Works To Otm Bldg In Afssr Gurgaon Under Age B/R (A/F) Gurgaon Under Ge(A/F) Gurgaon
Tender Value
40 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Flooring,Plastering, Joinery, Sanitary Fittings, Perioidcals And Internal Water Supply Incl Misc Repair Works To Otm Bldg In Afssr Gurgaon Under Age B/R (A/F) Gurgaon Under Ge(A/F) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc. |
| 2 | Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) |
| 3 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed |
| 4 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed |
| 5 | Dismantling Floor, Paver Tiles, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 6 | Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed. |
| 7 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed |
| 8 | Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads and removal for site complete all as specified and directed by Engineer-in-Charge |
| 9 | M&L 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 10 | Taking down or up galvanised steel tubing 15mm bore medium grade and connection and with all fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed |
| 11 | Taking down or up galvanised steel tubing 20mm bore medium grade and connection and with all fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed |
| 12 | S&F 15 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, complete all as specified and direced. |
| 13 | S&F 20 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, complete all as specified and direced. |
| 14 | Dismantling damaged/unserviceable GI Snap Grid Ceiling Frame Work with Ceiling Boards and wall lining of any description, complete all as specified and as directed. |
| 15 | Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed. |
| 16 | M&L for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
| 17 | S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of 'J' Bolt, complete all as specified and as directed. |
| 18 | M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 19 | M&L 8mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) with puttyt complete all as specified and directed. |
| 20 | M&L 4 mm thick designer Fibre cement board Tile of size 595x595 mm of approved texture, blossom, fixture and primer finished complete , complete all as specified and as directed by Engr-in- ChargeNote : Weight not less than 4.84 Kg /m2 |
| 21 | M&L for 12 mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size,fixed with nails or with staple in ceiling/ timber frame complete all as specified. |
| 22 | M&L RCC Pre-cast Cement Concrete 1:2:4 (12.5mm graded stone aggregate) as in Louvres and Jallies, 40mm thick (measured solid) with all mouldings including Reinforcement with 5.0-6.0mm dia Mild Steel Bars/ Wire and setting in Cement Morter 1:4 including dismantling Pre-cast RCC Cement Concrete Louvres and Jallies of any description, removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.NOTE : Cost of Mild Steel Bars/Wire as Reinforcement will deem to be included in the Quoted Unit Rate. |
| 23 | S&F in repair Aluminium Anodised powder coated Door Shutter with Frame 101.40x44.45mm having size of Long Rails/Style, Top and Middle/ Centre Rail shall be 84.40x44.45mm and Bottom Rail shall be 110x44.45mm of Aluminium Sheet shall be 16 gauge, Panels shall be provided with 5.0mm thick Sheet Glass and with 3mm thick ACP Sheet best quality (as approved), Jointing Cleats and Fixing Accessories including Locking Arrangement, fixed with Hinges to the Frame or Slididng Type or Pull & Push Type Shutters including Glazing Clip, Rubber Beading, Aluminium Handle of size 150mm (2 No.), Mortice Lock of size 100 mm MS 4- lever (1 No.) and all necessary Fittings and Fixtures¸complete all as specified and as directed. MAKE : HINDALCO/ INDALCO/ JINDAL |
| 24 | S&F powder coated (min thickness of powder coating 50 micron) aluminium three track window shutter (size 45x15mm) i.e two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and average width of apprature 1.40mm and sliding section confirming section cat No 20814 (from jindal) and frame (chowkat) of size 101.60x44.45x1.90mm thick etc including locking arrangement including Aluminium Grill from outside complete all as specified and as directed by Engr-in Charge.NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. |
| 25 | Taking down aluminium window of any description not exc. 2.00 Square Metre Each and Refixing in the Same or other Opening, after resecuring or easing and adjusting, including jointing cleats and necessary fittings, complete all as specified and as directed. |
| 26 | Repairing of Aluminium Door, Windows, Ventilators Shutter Fixed/ Side Hang, Sliding Type/Partition including taking down, refixing with minor adjustment for opening and closing properly with replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and as directed.NOTE : Quoted Unit Rate shall deem to be include Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. required/ordered at Site. |
| 27 | M&L Aluminium anodised Frame for Doors, Windows, Ventilators, Partitions, etc. having Powder Coating (minimum thickness of Powder coating 50 micron) with one or more rebates including Joining Cleat for fixing, etc., complete all as specified and as directed. |
| 28 | S&F Double Action Floor Spring hydraulically regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, other Parts made of Mild Steel heavy duty and fixed-in-repairs, complete all as specified and as directed. |
| 29 | S&F Sheet Glass 5.0mm thick, Tinted / Frosted (as approved by GE) fixing to Aluminium Window/Door including replacement of Rubber Packing and refixing Aluminium Beading, complete all as specified and as directed.NOTE : Cost of Rubber Packing shall deem to be include in the Quoted Unit Rate. |
| 30 | S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 \\"D\\" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays, Glazing etc complete all as specified and as directed. Make : NCL type-4000 Series |
| 31 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed.Note:- Area includes in this items upto 6 stories of building. |
| 32 | M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directeNote:- Area includes in this items upto 6 stories of building. |
| 33 | Supply only integral water proofing compound. |
| 34 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 36 | M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified |
| 37 | M&L complete removal of existing surfaces preparing old plastered surfaces of walls upto two storey by by mechenically complete all as specified and as directed. |
| 38 | M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface. |
| 39 | M&L for two coats of white wash on old plaster surface of ceiling including prepration of surface. |
| 40 | M & L for 1.5mm thick wall care putty on wall complete all as specified and as directed. |
| 41 | M&L preparing old distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any extra payment. |
| 42 | M&L for preparing Old plastered surface of walls and Scrapping down by Mechenically and applying One coat of oil emulsion distemper white or any tint etc complete as specified and directed Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost. |
| 43 | M&L preparing new Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved)with primer , complete all as specified and as directed.Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any extra payment. |
| 44 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed.Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 45 | M&L preparing old plastered surfaces of walls upto two storey , rubbing to obtained a Smooth Surface and applying one Coat of Acrylic Weather Coat Exterior Paint with approved Tint complete all as specified and as directed. |
| 46 | M & L for Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sq |
| 47 | M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed. |
| 48 | S&F pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick of 150g/cm an colour having tensile strength of 550 Mpa as in Roof Covering/ Cladding to Wall, fixed with self-tapping Screws, complete all as specified and as directed |
| 49 | M&L 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. |
| 50 | M&L 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. |
| 51 | M&L Vitirified Ceramic Tiles 7-8mm thick (Square/Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over , complete all as specified and as directed. |
| 52 | M&L Vitirified Ceramic Tiles 7-8mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Mortar shall deem to be include in the Quoted Unit Rate. |
| 53 | M&L vitrified Ceramic tiles light shade 7-8 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over , complete all as specified and as directed. |
| 54 | M&L Vitirified Ceramic Tiles 7-8mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile exc. 0.42 Sqm but n exc 1 sqm in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Mortar shall deem to be include in the Quoted Unit Rate. |
| 55 | M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 56 | M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 57 | M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over complete all as specified and as directed. |
| 58 | M&L Coloured Glazed Ceramic Tiles 300x600x8mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over complete all as specified and as directed. |
| 59 | M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 25cm x 25cm x 22mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed |
| 60 | M&L for 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-In- Charge. |
| 61 | M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) usingmarble dust with admixture of pigment to match with shade of granite.complete all as specified and as directed by Engineer-In- Charge. |
| 62 | Disconnecting existing tanks, exc 250 but n exc 1000 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleanin repairing, etc. measured separately) |
| 63 | S&F rotational moulded polythene white, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe. |
| 64 | S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe. |
| 65 | Cleaning and removing exc 250 but n exc 500 all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and ddirected by Engr-in-Charge. |
| 66 | Cleaning and removing exc 500 but n exc 1000 all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and ddirected by Engr-in-Charge. |
| 67 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. |
| 68 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed |
| 69 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed |
| 70 | S&F in repair Stainless Steel Plate Rack 75x75x25 Cm in size (weight not less than 8 Kg), made out of Stainless Steel 1.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws and fixed to wall , complete all as specified and as directed. |
| 71 | M&L for preparation of new steel surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 72 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, roof padding, Rounded & chamferd on edges, staging of water tank, benching etc and similar nature of works mixed with water liquid proofing admixture as per manufacturer's instruction including finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and directed by Engineer-in-Charge. Note :- (i) WPC shall be measured and paid separately. (ii) Rates include to carried out the work on roof slab upto 4th stories building & nothing extra shall be admissible on this account). |
| 73 | M&L for dismantling of existing Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking tiles any shape and size of 60/80mm thickness and refixing the same after excavating/levelling the ground surface etc complete all as specified and directed.Note : If any PCC required for subbase , sand cushion will be paid seperately in appropriate item. |
| 74 | M&L for Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking coloured paving block of glass fibre reinforced vibro compacted any shape and size conforming to IS-15658:2006 of 60mm thickness made with M-35 grade concrete match with grey cement and pigment etc complete all as specified and directed. |
| 75 | M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and directed. |
| 76 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) in sub base of floor complete all as specified and as directed . |
| 77 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 25mm thick in Sub-base (Levelling course for laying Tiles in Flooring), complete all as specified and as directed. |
| 78 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 79 | M&L Polycarbonate sheet of 10mm thicness, fixed with Coach Screw, almn channel with washer in Roof, Walls, MS Gates etc., complete all as specified and as directed. |
| 80 | S&F in repair for 5 to 7mm hollow , PVC Wall Panneling printed in any colour PVC sheet inclusive of solvent cement and fixing at site on PVC Frame as per specification complete all as specified and as directed.Note : Design /Pattern will be selected by GE/Engr-in-Charge. |
| 81 | S&F in repair angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore dia pipe complete all as specified and as directed |
| 82 | S&F in repair Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed 15 mm dia bore dia pipe complete all as specified and as directed. |
| 83 | S&F in repair Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed. |
| 84 | S&F in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed |
| 85 | Supply and fix in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold , including taking down complete all as specified and as directed. |
| 86 | S&F in repair brass Chromium Plated wall Mixture for mixing Hot and Cold for Shower suitable for fixing 15mm bore (dia) Pipe including Flange, suitable for bath mixture complete all as specified and as directed. |
| 87 | S&F Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5\\") Swivel Spout, Connecting Legs including Wall Flanges ,including taking down complete all as specified and as directed. |
| 88 | S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram and fixed-in-repairs, complete all as specified and as directed. |
| 89 | S & F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed by Engineer-in-Charge. |
| 90 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail glass self 600mm long as approved complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) / oval in shape with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed. |
| 92 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and fixed-in-repairs, complete all as specified and as complete all as specified and as directed. |
| 93 | S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed. |
| 94 | S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. |
| 95 | S&F Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed. |
| 96 | S&F One Piece Euorpen Water Closet Concealed of size 790x360x650mm Snow White, Soft Close Seat Cover having Twin Flush Fittings and Making Good to Floor/ distrubed Surfaces and fixed-in-repairs, complete all as specified and as directed. |
| 97 | S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed.MAKE : JAQUAR ALD-CHR-585 or equivalent in GEM/ MARC (as approved by GE). |
| 98 | M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. |
| 99 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm. |
| 100 | S&F in repair 600mm x 450mm mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers with aluminium beading all around complete all as specified and directed |
| 101 | S&F Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete all as specified and as directed. |
| 102 | S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and directed. |
| 103 | S&F in repair Alluminium alloy curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed. |
| 104 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 105 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 106 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/fixed to wall complete all as specified and as directed. |
| 107 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/fixed to wall complete all as specified and as directed. |
| 108 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 109 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 110 | Demolation of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 111 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 112 | Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 113 | S&F in repair Vitreous china urinals, half stall type (635x450mm), complete including providing and fixing, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, grating and union for discharge pipe, CP urinal spreader and fitting with bottle trap & CP waste coupling , complete all as specified and as directed. |
| 114 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified. |
| 115 | M&L for of transparent toughened glass 10mm thickness and its fitting as required includingstainless steel L connector 75mm wide on bothside with PVC acrylic sheet inside and fixing with SS 304 grade screw as required and Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with SS 304 grade cover, governing pivot made of brass, other parts made of mild steel heavy duty , SS 304 grade D type circular handle of 450mm length and 25mm dia with locking arrangement of SS 304 grade lock, self closing hydarulic stainless steel 304 grade top/bottom patch with pivot and self adhessive film for complete all as specifed and as directed by Engr -in-Charge |
| 116 | S&F of transparent toughened glass 10mm thickness and its fitting as required including all fittings and using any purpose for partation wall with required packing material and connected fittings all as directed by Engr-in-Charge. make Saint Gobain or Modi equivalent |
| 117 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified. |
| 118 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified. |
| 119 | M&L surfaces of any description over 10cm girth or width, not otherwise described two coat of plastic paint with primer complete all as specified and directed |
| 120 | M&L glass transparant film of any shade any size complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender